SubGroups/Network

From Technologia Incognita
Revision as of 17:45, 14 February 2013 by Arda Xi (talk | contribs) (Machines)
Jump to: navigation, search

This page is for the network and server infrastructure for the space.

Members

Plans

There is an initial plan, see the Talk page of this subgroup.

  • Implement SpaceNet
  • Arrange space infrastructure like cabling, network equipment and servers
  • UPDATE: most of network-topo infra moved to cleanroom after drawing new cables.
  • TODO: move uplink to cleanroom-port which will free up 'uplink1' cable (see below)

Responsibility

  • Oversee network infrastructure

Network Structure

Cables & Sockets

There are three kinds of ethernet-cabling currently in the space.

The first kind are the ethernet data-bars provided by Urban Resort to facilitate providing each space in the building with an uplink for internet of some sort. In our space these can be found in the solder-area (below the window there), as well as one set of two ports in the 'dirty room' and a similar set in the 'dirty room'. Currently our uplink to UR-infra comes from a port in the solder-area. The plan is to move this to a port in the clean-room.

The second kind of cabling is the 'permanent' cabling as provided by ourselves that run from/to the clean-room and provide ethernet connectivity to different ports/devices in the space. The short-term goal is to have these cables all terminate on a patch-bay in the clean-room and dual-RJ45 ports on the walls or other places. All cables are to have the same label on both ends of the cable.

An inventory of currently provided ports is below:

port description
port 1 First port of two in the wall behind the presentation desk
port 2 Second port of two in the wall behind the presentation desk
door1 First of two cables that run to the corner of the ceiling at the door
door2 second of two cables that run to the corner of the ceiling at the door
middle1 First of two cables that run to the center of the space; above the ceiling just behind the beamer; runs to solder-space switch for now; planned for power-bar infra later
middle2 second of two cables that run to the center of the space; above the ceiling just behind the beamer; has AP connected
table runs to wall next to the arcade; reserved for connecting the table with ethernet
arcade runs to the wall next to the arcade; reserved for connecting the arcade machine with ethernet
uplink1 special-purpose wire; used to connect the UR-Uplink to infra in the cleanroom. Can be repurposed later.

The third kind of ethernet-cabling is the cabling found in the space, drawn from local switches on tables or walls to devices found in the space. Currently there is no overview of these devices or the amount of switches/there. It might be good to make a distinction between 'permanent infra' switches and 'user-purpose' switches later.

layer 2/3

  • Nyancat is the main router (laptop).
  • The Cisco Manager is connected to nyancat
  • The Cisco manager bridges to the rest of the network
  • There are the following Wifi networks: TechInc, TechInc-24, TechInc-5, TechInc-SPN, Spacenet
  • TechInc-SPN is the only one which is on a seperate VLAN, which does not do IPv6
  • TechInc is on 2.4ghz and 5ghz
  • Spacenet is uhm... in some sort of state.

Machines

HostnameIDIPv4IPv6FunctionLocationContact
TI-HP-UrbanResort210.0.20.2SwitchUrban Resort Patchroom
Indicio310.0.20.3MPD ServerBelow the mixer
TI-HP-CleanRoom410.0.20.4SwitchCleanRoom
Case610.0.20.62001:470:7894::6PlaygroundNeuromancerWebmind
Peter Riviera1010.0.20.102001:470:7894::10ShardikNeuromancerDreamer
Hideo1110.0.20.112001:470:7894::11NeuromancerUltratux
Wintermute1210.0.20.122001:470:7894::12Lorea testingNeuromancerWebmind
Dixie Flatline1310.0.20.132001:470:7894::13asteriskNeuromancerRealitygaps
Replicator1710.0.20.173D printer, powerbar-serverNext to 3D printerNathan7
Arda Xi
Lady 3Jane Marie-France Tessier-Ashpool1810.0.20.182001:470:7894::18playgroundNeuromancerAmx109
MikroTik2210.0.20.22routingRoof
Finn2310.0.20.232001:470:7894::23monitoring/alertingNeuromancer
RIPE32482410.0.20.24BackdoorNSAWebmind
Maelcum2510.0.20.25testingneuromancer
C642610.0.20.26A/VBelow the A/V desk
SIPphone2710.0.20.27It's a phoneUnder mixerArda Xi
Deane2810.0.20.282001:470:7894::28diasporaNeuromancer?
Cerberupsvoertuig3010.0.20.303D printingmakerlaneUltratux
Control-k
Wizzup
TP-Link3110.0.20.312001:470:7894::31WAPIn spaceWizzup
Huelights3210.0.20.32control lights on the tabletableThe JinX
... further results

refresh

Add

Hostname IPv4 IPv6 Function Location Contact
Indicio 10.0.20.3 rnd MPD Server Below the mixer  ??
Neuromancer 10.0.20.4 2a02:898:109:2012::20:4 Xen Host, IPv6 routing Webmind
Molly 10.0.20.5 2a02:898:109:2012::20:5 Hypatia neuromancer Webmind
Case 10.0.20.6 2a02:898:109:2012::20:6 Playground neuromancer Webmind
Armitage 10.0.20.7 2a02:898:109:2012::20:7 LDAP/Radius for SpaceNet neuromancer DrWax
n/a 10.0.20.8 n/a Cisco WLC Management Cleanroom DrWhax
n/a 10.0.20.9 n/a Cisco WLC AP Manager Cleanroom DrWhax
Peter Riviera 10.0.20.10 2a02:898:109:2012::20:10 Shardik neuromancer Dreamer
Hideo 10.0.20.11 2a02:898:109:2012::20:11 undef neuromancer Ultratux
Wintermute 10.0.20.12 2a02:898:109:2012::20:12 Lorea testing neuromancer Webmind
Dixie Flatline 10.0.20.13 2a02:898:109:2012::20:13 undef neuromancer Realitygaps
Neuromancer (new) 10.0.20.15 2a02:898:109:2012::20:15 Xen Host, IPv6 routing Webmind
Ledwall 10.0.20.16 n/a Led wall Brainsmoke
Nyancat 10.0.20.254 / 192.168.1.1 2a02:898:109:2012::1 Router Cleanroom Webmind

Services

List of services, each with a small guide/article on how to use / tweak it said service:

  • Neuromancer, VPS host and IPv6 router, managed by Webmind
  • Molly, VPS guest, runs Hypatia, managed by Webmind
  • Armitage, VPS guest on neuromancer, spacenet, run by DrWax
  • Indicio, MPD Server, managed by ?
  • physical infra (cables/ports/etc) can be inquired about Justa

TODO:

  • Remote audio sink using pulseaudio (soon)
  • Workstation (just one)
  • AP's for the cisco 2811 controller with N? If that's even possible..

SpaceNet

  • We've discarded the original configuration in the Cisco 2811 part and we've made a bridge-group bridging both FastEthernet ports and the IntegratedServiceModule interface.
  • Only the spacenet SSID is currently enabled.
  • One AP is online, everything is in the same VLAN. The AP's will tunnel their traffic through the controller
  • Expanding coverage should be as easy as adding more AP's in the TechInc VLAN
  • The radio's of some AP's might not come online at first because of the usage of PoE injectors. This can be fixed in the controller at AP specific configuration > Advanced > PoE injector state
  • Adding more VLAN's is of course possible, but for now there wasn't any inter-VLAN routing in place at TechInc