Difference between revisions of "SubGroups/Network"

From Technologia Incognita
Jump to: navigation, search
(Machines)
Line 22: Line 22:
  
 
== Cables & Sockets ==
 
== Cables & Sockets ==
* All network wall sockets go to the 'cleanroom'
+
 
* There is one cable from the soldering-corner to the cleanroon for uplink
+
*Ethernetx5 has been pulled through the roof. 2 terminate in the middle of the roof, others span to the wall on the far side of the space - these have not been connected to sockets yet
* This is all connected by a 19" D-Link switch
+
**One Cisco AP is enabled and is on the ceiling in the middle of the space
 +
**The other 'middle' cable supplies stand alone hub near the window
 +
*Current 'live' patch (near soldering corner) is patched to the clean room
  
 
==  layer 2/3 ==  
 
==  layer 2/3 ==  

Revision as of 13:51, 12 February 2013

This page is for the network and server infrastructure for the space.

Members

Plans

There is an initial plan, see the Talk page of this subgroup.

  • Implement SpaceNet
  • Arrange space infrastructure like cabling, network equipment and servers

Responsibility

  • Oversee network infrastructure

Network Structure

Cables & Sockets

  • Ethernetx5 has been pulled through the roof. 2 terminate in the middle of the roof, others span to the wall on the far side of the space - these have not been connected to sockets yet
    • One Cisco AP is enabled and is on the ceiling in the middle of the space
    • The other 'middle' cable supplies stand alone hub near the window
  • Current 'live' patch (near soldering corner) is patched to the clean room

layer 2/3

  • Nyancat is the main router (laptop).
  • The Cisco Manager is connected to nyancat
  • The Cisco manager bridges to the rest of the network
  • There are the following Wifi networks: TechInc, TechInc-24, TechInc-5, TechInc-SPN, Spacenet
  • TechInc-SPN is the only one which is on a seperate VLAN, which does not do IPv6
  • TechInc is on 2.4ghz and 5ghz
  • Spacenet is uhm... in some sort of state.

Machines

Hostname IPv4 IPv6 Function Location Contact
Indicio 10.0.20.3 rnd MPD Server Below the mixer  ??
Neuromancer 10.0.20.4 2a02:898:109:2012::20:4 Xen Host, IPv6 routing Webmind
Molly 10.0.20.5 2a02:898:109:2012::20:5 Hypatia neuromancer Webmind
Case 10.0.20.6 2a02:898:109:2012::20:6 Playground neuromancer Webmind
Armitage 10.0.20.7 2a02:898:109:2012::20:7 LDAP/Radius for SpaceNet neuromancer DrWax
n/a 10.0.20.8 n/a Cisco WLC Management Corner DrWhax
n/a 10.0.20.9 n/a Cisco WLC AP Manager Corner DrWhax
Peter Riviera 10.0.20.10 2a02:898:109:2012::20:10 Shardik neuromancer Dreamer
Hideo 10.0.20.11 2a02:898:109:2012::20:11 undef neuromancer Ultratux
Wintermute 10.0.20.12 2a02:898:109:2012::20:12 Lorea testing neuromancer Webmind
Dixie Flatline 10.0.20.13 2a02:898:109:2012::20:13 undef neuromancer Realitygaps
Neuromancer (new) 10.0.20.15 2a02:898:109:2012::20:15 Xen Host, IPv6 routing Webmind
Ledwall 10.0.20.16 n/a Led wall Brainsmoke
Nyancat 10.0.20.254 / 192.168.1.1 2a02:898:109:2012::1 Router Webmind

Services

List of services, each with a small guide/article on how to use / tweak it said service:

  • Neuromancer, VPS host and IPv6 router, managed by Webmind
  • Molly, VPS guest, runs Hypatia, managed by Webmind
  • Armitage, VPS guest on neuromancer, spacenet, run by DrWax
  • Indicio, MPD Server, managed by ?


TODO:

  • Remote audio sink using pulseaudio (soon)
  • Workstation (just one)
  • AP's for the cisco 2811 controller with N? If that's even possible..

SpaceNet

  • We've discarded the original configuration in the Cisco 2811 part and we've made a bridge-group bridging both FastEthernet ports and the IntegratedServiceModule interface.
  • Only the spacenet SSID is currently enabled.
  • One AP is online, everything is in the same VLAN. The AP's will tunnel their traffic through the controller
  • Expanding coverage should be as easy as adding more AP's in the TechInc VLAN
  • The radio's of some AP's might not come online at first because of the usage of PoE injectors. This can be fixed in the controller at AP specific configuration > Advanced > PoE injector state
  • Adding more VLAN's is of course possible, but for now there wasn't any inter-VLAN routing in place at TechInc