Difference between revisions of "CircularSawRefurbish"
(Created page with "{{Project |ProjectStatus=Finished |ProjectNiche=Mechanics |ProjectPurpose=Infrastructure }} Branko donated a circular saw to Techinc a year ago. We used it to cut the laminate...") |
m |
||
Line 4: | Line 4: | ||
|ProjectPurpose=Infrastructure | |ProjectPurpose=Infrastructure | ||
}} | }} | ||
− | Branko donated a circular saw to Techinc a year ago. We used it to cut the laminate flooring for the dirty room expansion, but it needed some love to get it back in a good and safe(r) state. | + | [[user:Branko]] donated a circular saw to Techinc a year ago. We used it to cut the laminate flooring for the dirty room expansion, but it needed some love to get it back in a good and safe(r) state. |
I worked on it and changed or replaced the following: | I worked on it and changed or replaced the following: |
Revision as of 23:35, 6 December 2015
Projects | |
---|---|
Participants | Ultratux |
Skills | |
Status | Finished |
Niche | Mechanics |
Purpose | Infrastructure |
I worked on it and changed or replaced the following:
- Replaced the power cable and plug which was in a dire state for a good and long rubber cable + plug
- Purchased a larger, fine-toothed saw blade for it from Eco-tools. The original blade was too small for the machine and completely blunt.
- Soldered the broken holder of the saw protection lid and bent/adjusted it to sit correctly over the saw blade.
- Took an old vacuum cleaner small brush, cut off the brush hairs, glued it to the back of the saw compartment to act as sawdust suction port
- Cut and bent a piece of metal grille to act as a protection for the saw blade which was completely unguarded ('finger shredder')
- Mounted it on a piece of wood fitted with mounting holes for the modular bench system we use in the dirtyroom
To do:
- Bought a nice green-blue metallic Hammerite paint for it but have not had opportunity to apply it.
- Design a better system to attach the metal grille protection. Now I use a temporary clamp.