Difference between revisions of "Cut/audio setup glitches"

Latest revision as of 15:31, 23 February 2016

The speakers should be hanged properly
- These speakers are much heavier than the old ones
- please don't hang them from conduits or pipes!
- make a proper mount in the ceiling
~~The amp should be moved near the mixing board~~

@@ Line 5: / Line 5: @@
 |Contact=User:Justa
 }}
-* The speakers should be hanged properly again(!)
+* The speakers should be hanged properly
-  (not ''again'', because they weren't '''properly''' hanged before. These speakers are much heavier, so please don't hang them from conduits or pipes, but make a proper mount in the ceiling!) [[User:Ultratux|Ultratux]] 12:36, 13 January 2014 (CET)
+** These speakers are much heavier than the old ones
-* The amp should be moved near the mixing board
+** please don't hang them from conduits or pipes!
-  (This is just as ridiculous as saying "The mike should be moved close to the mixing desk". No, when the cable(s) is(are) of good quality there is no need for that.) [[User:Ultratux|Ultratux]] 12:36, 13 January 2014 (CET)
+** make a proper mount in the ceiling
-** This should alleviate the problems with stuff interfering on the line to the amp, and ultimately rid us of the annoying ~10KHz beep
+* <s>The amp should be moved near the mixing board</s>