Difference between revisions of "Turnigy 9xr-pro"
m (→Original 9x) |
m (→The 9xr) |
||
| Line 23: | Line 23: | ||
| − | + | * Provided with open source software | |
| − | + | * Provided with ISP-header for easier re-flashing | |
| − | |||
=== 9xr-pro specifics === | === 9xr-pro specifics === | ||
Revision as of 15:14, 3 July 2014
Contents
Description
Overview
The Turnigy 9XR-pro is a product co-developed with the people from Hobby King by their semi-related brand 'Turnigy'.
It's sold as a 'pro' version of the 9X-series transmitters as a all-in-one product that includes a famous/popular replacement control-board that was sold at [1].
The replacement board provided extended capabilities over the existing Atmega-based platform by using an ARM-based architecture. This board ended up being the base for the FrSky Taranis and now the 9xr-PRO as well.
9x series
The Turnigy 9X series are all 8-channel transmitters allowing great re-configurability and modding.
Original 9x
Atmega based; often modified to allow easy reflashing through broken out ISP-connector.
- Radio-module bay for choosing TX-module technology
The 9xr
Atmega based; provided with modding in mind. New housing.
- Provided with open source software
- Provided with ISP-header for easier re-flashing
9xr-pro specifics
The 9XR-PRO has the same outer appearance as the 9XR; only the internals have been reworked extensively; except for most of the mechanics.
- ARM-based platform - Voice-enabled - Haptic feedback (buzzer) - USB-connection for both firmware-upgrading as well as accessing voice/setting files via USB-mass-storage mode - Headphone jack - SD-card with config/firmware/voice. - Option for adding blue-tooth for telemetry passthrough.
