Difference between revisions of "Turnigy 9xr-pro"
m |
|||
| Line 4: | Line 4: | ||
The Turnigy 9XR-pro is a product co-developed with the people from [http://www.hobbyking.com Hobby King] by their semi-related brand 'Turnigy'. | The Turnigy 9XR-pro is a product co-developed with the people from [http://www.hobbyking.com Hobby King] by their semi-related brand 'Turnigy'. | ||
| − | It's sold as a 'pro' version of the 9X-series transmitters as a all-in-one product that includes a famous/popular replacement control-board that was sold at | + | It's sold as a 'pro' version of the 9X-series transmitters as a all-in-one product that includes a famous/popular replacement control-board that was sold at [http://www.ersky9x.net/]. |
| + | |||
| + | The replacement board provided extended capabilities over the existing Atmega-based platform by using an ARM-based architecture. This board ended up being the base for the FrSky Taranis and now the 9xr-PRO as well. | ||
| + | |||
=== 9x series === | === 9x series === | ||
| + | |||
| + | The Turnigy 9X series are all 8-channel transmitters allowing great re-configurability and modding. | ||
| + | |||
| + | ==== Original 9x ==== | ||
| + | |||
| + | Atmega based; often modified to allow easy reflashing through broken out ISP-connector. | ||
| + | |||
| + | - Radio-module bay for choosing TX-module technology | ||
| + | |||
| + | |||
| + | ==== The 9xr ==== | ||
| + | |||
| + | Atmega based; provided with modding in mind. New housing. | ||
| + | |||
| + | |||
| + | - Provided with open source software | ||
| + | - Provided with ISP-header for easier re-flashing | ||
| + | |||
| + | |||
=== 9xr-pro specifics === | === 9xr-pro specifics === | ||
| + | |||
| + | The 9XR-PRO has the same outer appearance as the 9XR; only the internals have been reworked extensively; except for most of the mechanics. | ||
| + | |||
| + | - ARM-based platform | ||
| + | - Voice-enabled | ||
| + | - Haptic feedback (buzzer) | ||
| + | - USB-connection for both firmware-upgrading as well as accessing voice/setting files via USB-mass-storage mode | ||
| + | - Headphone jack | ||
| + | - SD-card with config/firmware/voice. | ||
| + | - Option for adding blue-tooth for telemetry passthrough. | ||
| + | |||
| + | |||
=== Hardware specs === | === Hardware specs === | ||
| + | |||
== History == | == History == | ||
Revision as of 15:13, 3 July 2014
Contents
Description
Overview
The Turnigy 9XR-pro is a product co-developed with the people from Hobby King by their semi-related brand 'Turnigy'.
It's sold as a 'pro' version of the 9X-series transmitters as a all-in-one product that includes a famous/popular replacement control-board that was sold at [1].
The replacement board provided extended capabilities over the existing Atmega-based platform by using an ARM-based architecture. This board ended up being the base for the FrSky Taranis and now the 9xr-PRO as well.
9x series
The Turnigy 9X series are all 8-channel transmitters allowing great re-configurability and modding.
Original 9x
Atmega based; often modified to allow easy reflashing through broken out ISP-connector.
- Radio-module bay for choosing TX-module technology
The 9xr
Atmega based; provided with modding in mind. New housing.
- Provided with open source software
- Provided with ISP-header for easier re-flashing
9xr-pro specifics
The 9XR-PRO has the same outer appearance as the 9XR; only the internals have been reworked extensively; except for most of the mechanics.
- ARM-based platform - Voice-enabled - Haptic feedback (buzzer) - USB-connection for both firmware-upgrading as well as accessing voice/setting files via USB-mass-storage mode - Headphone jack - SD-card with config/firmware/voice. - Option for adding blue-tooth for telemetry passthrough.
