Memberbox event III

From Technologia Incognita
Revision as of 23:52, 10 November 2016 by Ultratux (talk | contribs) (Created page with "{{Event |Date=2016/12/11 |Time=13:00 - |EventType=Workshop |Contact=ultratux }} ==NOTE: THIS IS A PLACEHOLDER! DATE IS NOT CERTAIN YET== Please see Memberbox_DIY for info...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Memberbox event III
Date 2016/12/11
Time 13:00 -
Location
Type Workshop
Contact ultratux

NOTE: THIS IS A PLACEHOLDER! DATE IS NOT CERTAIN YET

Please see Memberbox_DIY for info about the design (final)

Another incantation of the workshop otherwise known as Learning to use the Boxjointjig and SawTable and gain a unique memberbox in the process.

(Note: your fresh memberbox will have to be finished after the wood glue has cured, so you'll have to come back on a future date to finalize it (sanding, optionally painting))

We ask a fee of 10 euros to help cover material cost and wear of equipment.

There is space for 3-4 people MAX on this workshop because space is cramped. There is now a caveat though: In our previous workshops we limited the amount too, but then people didn't show up, leaving us with just a single participant. That was disappointing. We shopped and prepared stuff, and we don't want to explain everything six times. So a new rule is: If you sign up, we expect you to be there. If you are a no-show without a good reason, we might not accept your attendance in future incantations of this event.

   You ?
   ...