Difference between revisions of "Arcade Machine Volume Control"
m |
|||
| Line 7: | Line 7: | ||
}} | }} | ||
this page is a submodule of the main arcade machine page: https://wiki.techinc.nl/Arcade_Machine | this page is a submodule of the main arcade machine page: https://wiki.techinc.nl/Arcade_Machine | ||
| + | |||
| + | =how to adjust the volume of the arcade machine= | ||
| + | |||
| + | this neat little device labelled "volume", mounted at the top of the arcade machine, has a nice big turning knob that can be used to easily adjust the volume. it basically emulates a keyboard. | ||
| + | |||
| + | it also has an IR receiver that responds to most inputs from a random remote control that's laying around somewhere nearby. you can use this to adjust the volume, but also to navigate through the machine, or to play games if you feel up to the challenge. | ||
| + | |||
| + | another way to remotely adjust the volume of the arcade machine is to SSH into the machine. this is a native feature of the arcade machine and does not involve the device described on this page. we decided to make this device because we felt like this method was not intuitive nor easily accessible. we know the raspberry pi is very overpowered for this task, but we're happy it just works. you're welcome to come up with a more efficient way to achieve the same goal. | ||
| + | |||
| + | to adjust the volume with SSH follow these steps: | ||
| + | |||
| + | # open a terminal on another device | ||
| + | # make sure you are connected to the techinc network | ||
| + | # type "ssh techinc@10.209.10.55" and press enter | ||
| + | # type "alsamixer" and press enter | ||
| + | # now you can use the up and down arrows to adjust the volume | ||
| + | |||
| + | if all else fails you can always adjust the volume on the machine itself using alsamixer if you can figure out how to open a terminal on there. perhaps by pressing ctrl+alt+t on the keyboard. | ||
| + | |||
| + | =volume device= | ||
==hardware== | ==hardware== | ||
| Line 16: | Line 36: | ||
[[File:Arcade_volume_control_backside.jpg|thumb|backside of the volume control]] | [[File:Arcade_volume_control_backside.jpg|thumb|backside of the volume control]] | ||
| − | == | + | ==firmware== |
https://github.com/TT-392/volume_control.git | https://github.com/TT-392/volume_control.git | ||
==to do== | ==to do== | ||
| + | * give the volume control device a fun name | ||
* design a 3d printed case to attach this device to the arcade machine | * design a 3d printed case to attach this device to the arcade machine | ||
| + | * add easy to use flipper zero controls for IR | ||
* expand this page | * expand this page | ||
| − | |||
====optional:==== | ====optional:==== | ||
Latest revision as of 18:06, 11 July 2023
| Projects | |
|---|---|
| |
| Participants | Li0n |
| Skills | Pcb-destruction, Programming, Soldering |
| Status | Active |
| Niche | Electronics |
| Purpose | Infrastructure |
this page is a submodule of the main arcade machine page: https://wiki.techinc.nl/Arcade_Machine
Contents
how to adjust the volume of the arcade machine
this neat little device labelled "volume", mounted at the top of the arcade machine, has a nice big turning knob that can be used to easily adjust the volume. it basically emulates a keyboard.
it also has an IR receiver that responds to most inputs from a random remote control that's laying around somewhere nearby. you can use this to adjust the volume, but also to navigate through the machine, or to play games if you feel up to the challenge.
another way to remotely adjust the volume of the arcade machine is to SSH into the machine. this is a native feature of the arcade machine and does not involve the device described on this page. we decided to make this device because we felt like this method was not intuitive nor easily accessible. we know the raspberry pi is very overpowered for this task, but we're happy it just works. you're welcome to come up with a more efficient way to achieve the same goal.
to adjust the volume with SSH follow these steps:
- open a terminal on another device
- make sure you are connected to the techinc network
- type "ssh techinc@10.209.10.55" and press enter
- type "alsamixer" and press enter
- now you can use the up and down arrows to adjust the volume
if all else fails you can always adjust the volume on the machine itself using alsamixer if you can figure out how to open a terminal on there. perhaps by pressing ctrl+alt+t on the keyboard.
volume device
hardware
- pcb and casing taken from a radio
- Raspberry Pi Pico
- micro-usb cable
- some wires, solder, and hot glue
firmware
https://github.com/TT-392/volume_control.git
to do
- give the volume control device a fun name
- design a 3d printed case to attach this device to the arcade machine
- add easy to use flipper zero controls for IR
- expand this page
optional:
- try to make the screen do something
- make more buttons work
- come up with a use for the other buttons and knobs
