Lightswitch

Projects
Participants	Wizzup
Skills	soldering, lasercutting, insanity, programming
Status	Active
Niche	Electronics
Purpose	World domination

The most complex lightswitch we can think of, well almost.

Code is work in progress: https://github.com/MerlijnWajer/powerbars/blob/hardware_interface/spacebar.py

• upper-binary: diameter = 12mm
• lower-binary: width x height = 24x25mm
• mode-switch: diameter = 6mm (screw distance= 32mm)
• info-request: diameter = 15mm

• 
• 

• 
• 
• 
• 
• 
• 

There are 8 switches used to turn certain devices On and Off. So naively, we can have at least 8 "presets". I have a few down already:

0: Turn Off/On everything 1: Turn Off/On (all) lights 2: Turn Off/On audio 3: Turn Off/On west space (power, light) 4: ... 5: ... 6: ... 7: ...

Input on other groups/presets/things to add to this list is very welcome.

Of course, we added some extra switches and it's possible to add a lot more options. We can add a single switch that allows up to 16 options.

The extreme example is the expert mode, where the 8 switches will act as "bits" of a single byte. That already gives one 255 possible options for configuration. We added another switch, to allow one to 'stack' said byte configuration to add another byte. I expect we don't need more than 65536 options, but it's possible. And the input will be in little endian.

Eventually, it will also feature LEDs to indicate the state of each individual socket. Other planned "add-ons" are:

• Small display + a two buttons to "scroll" through different options, with two

 buttons to turn said options on and/or off.

• Possibly using a speaker for feedback

This is the layout, in plaintext (design is modular and allows adding more buttons, etc)

   +------------------------------------------------------------+
   -                                                            -
   -  LED  Switch [0]   [Mode: Normal/Expert]   [Show Status]   -
   -                                                            -
   -  LED  Switch [1]    LED LED LED LED LED LED LED LED LED    -
   -                                                            -
   -  LED  Switch [2]    LED LED LED LED LED LED LED LED LED    -
   -                                                            -
   -  LED  Switch [3]    LED LED LED LED LED LED LED LED LED    -
   -                                                            -
   -  LED  Switch [4]    LED LED LED LED LED LED LED LED LED    -
   -                                                            -
   -  LED  Switch [5]    LED LED LED LED LED LED LED LED LED    -
   -                                                            -
   -  LED  Switch [6]    LED LED LED LED LED LED LED LED LED    -
   -                                                            -
   -  LED  Switch [7]   [ Act/Enf  ] [ Stack ]  [ Mode??? ]     -
   -                                                            -
   +------------------------------------------------------------+

Act(ivate) and Stack work in expert mode, respectively taking the current bytes as a number and add a byte to the stack.

Enf(orce) will, in normal mode, enforce all the current settings of all the switches, whereas they will normally only change when turned.

"Mode???" is a switch that can take several different states. These will be used for possible addons (such as switching endianness), but probably only in expert mode -- to keep the basic usage sane.

LEDs won't be there for some time.

We'll need an embedded device to control all of this - costs about 40 euro.