Difference between revisions of "Turnigy 9xr-pro"
m (→Hardware specs) |
(→Hardware specs) |
||
| Line 59: | Line 59: | ||
| − | See [[File:9xr-pro-board.JPG here]] for a system overview of the 9XR-pro. | + | See [[File:9xr-pro-board.JPG|here]] for a system overview of the 9XR-pro. |
== History == | == History == | ||
Revision as of 14:31, 3 July 2014
Contents
Description
Overview
The Turnigy 9XR-pro is a product co-developed with the people from Hobby King by their semi-related brand 'Turnigy'.
It's sold as a 'pro' version of the 9X-series transmitters as a all-in-one product that includes a famous/popular replacement control-board that was sold at [1].
The replacement board provided extended capabilities over the existing Atmega-based platform by using an ARM-based architecture. This board ended up being the base for the FrSky Taranis and now the 9xr-PRO as well.
9x series
The Turnigy 9X series are all 8-channel transmitters allowing great re-configurability and modding.
Original 9x
Atmega based; often modified to allow easy reflashing through broken out ISP-connector.
- Radio-module bay for choosing TX-module technology
The 9xr
Atmega based; provided with modding in mind. New housing.
- Provided with open source software
- Provided with ISP-header for easier re-flashing
9xr-pro specifics
The 9XR-PRO has the same outer appearance as the 9XR; only the internals have been reworked extensively; except for most of the mechanics.
- ARM-based platform
- Voice-enabled
- Haptic feedback (buzzer)
- USB-connection for both firmware-upgrading as well as accessing voice/setting files via USB-mass-storage mode
- Headphone jack
- SD-card with config/firmware/voice.
- Option for adding blue-tooth for telemetry passthrough.
Hardware specs
- Atmel SAM3S ARM Cortex M3 , 32 bit Micro-controller , 512K flash , 64Kb of SRAM
- Inputs for telemetry via Futaba-port. (com2)
- Extra serial-ports for Bluetooth, etc. (com3)
- Option for a rotary-encoder.
- Internal speaker, headphone jack
- SD-slot; included 2GiB SD-card
- Power-jack
- Connection for 3S LIPO-cell via balance-plug connector
- Internal 2.4Ghz antenna option
- Backlighted graphic LCD
- PPM2 output option for second 8-channel PPM output
- 6x 2-position switches
- 1x 3-position switches
- 2x joysticks + 4 trim-switches
- optional extra analog input for rotary-pot, multi-position switch
- optional exrta 2-position switch
See 
for a system overview of the 9XR-pro.
