Difference between revisions of "Powerpi"
m (→Links) |
(→Intro) |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
Building the 'powerpi' power usage monitor for TechInc | Building the 'powerpi' power usage monitor for TechInc | ||
| + | The raspberry PI in the mains-box is powered by a small power-module in the second row, next to the single (schuko) powersocket. | ||
| + | The purpose of it is to interpret the S0-output (100-pulse-per-KW/h) coming from the [[https://www.eltako.com/fileadmin/downloads/vl/Technische_fiches/Technische_fiche_wireless_DSZ15D-3x80A.pdf Driefazige kWh-teller DSz15D-3x80A]] which is mounted on the most bottom rail. | ||
| + | |||
| + | Some info on how to connect something to the S0 bus can be found here: | ||
| + | [[File:S0-bus application note.pdf]] | ||
| + | |||
| + | A good bit of info about working with Optocouplers can be found [[https://www.nutsvolts.com/magazine/article/optocoupler-circuits here]] | ||
=Links= | =Links= | ||
| − | https://www.hwhardsoft.de/deutsch/ | + | https://www.hwhardsoft.de/deutsch/raspibox-zero/ |
http://ondrej1024.github.io/emond/ | http://ondrej1024.github.io/emond/ | ||
| Line 11: | Line 18: | ||
https://pypi.org/project/spidev/ | https://pypi.org/project/spidev/ | ||
| − | https://www.waveshare.com/wiki/1. | + | https://www.waveshare.com/wiki/1.3inch_LCD_Module |
https://www.waveshare.com/wiki/Libraries_Installation_for_RPi | https://www.waveshare.com/wiki/Libraries_Installation_for_RPi | ||
| Line 28: | Line 35: | ||
sudo apt-get install ttf-wqy-zenhei | sudo apt-get install ttf-wqy-zenhei | ||
| + | |||
| + | https://blog.webernetz.net/stromzahler-mit-s0-schnittstelle-vom-raspberry-pi-auswerten/ | ||
| + | |||
| + | https://www.raspberrypi.org/documentation/linux/usage/systemd.md | ||
Latest revision as of 10:34, 22 March 2019
Intro
Building the 'powerpi' power usage monitor for TechInc The raspberry PI in the mains-box is powered by a small power-module in the second row, next to the single (schuko) powersocket. The purpose of it is to interpret the S0-output (100-pulse-per-KW/h) coming from the [Driefazige kWh-teller DSz15D-3x80A] which is mounted on the most bottom rail.
Some info on how to connect something to the S0 bus can be found here: File:S0-bus application note.pdf
A good bit of info about working with Optocouplers can be found [here]
Links
https://www.hwhardsoft.de/deutsch/raspibox-zero/
http://ondrej1024.github.io/emond/
https://pypi.org/project/spidev/
https://www.waveshare.com/wiki/1.3inch_LCD_Module
https://www.waveshare.com/wiki/Libraries_Installation_for_RPi
https://www.waveshare.com/wiki/File:1.3inch_LCD_HAT.tar.gz
https://www.waveshare.com/w/upload/6/6b/1.3inch_lcd_hat_user_manual_en.pdf
http://www.airspayce.com/mikem/bcm2835/
https://projects.drogon.net/raspberry-pi/wiringpi/download-and-install/
https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md
sudo apt-get install ttf-freefont
sudo apt-get install ttf-wqy-zenhei
https://blog.webernetz.net/stromzahler-mit-s0-schnittstelle-vom-raspberry-pi-auswerten/
https://www.raspberrypi.org/documentation/linux/usage/systemd.md
