Work-Adventure/install

Introduction

Since early 2021, Techinc hosts an 'instance' of Work-Adventure on play.social.techinc.nl.

[Work-Adventure] can be described as a spatially-enabled meet/chat space in an environment that is akin to 16-bit RPG games from the 90's. It allows text-based messaging, has direct web-rtc enabled video/audio chats available for up to 4 people in eachother's vincinity, as well as providign mechanisms to have 'rooms' of more participants by leveraging a [JITSI] server of choice.

The software has been designed by [The Coding Machine] and is released on their [github repo] as open source. The release is fully functional, apart from lacking an authentication/management backend that would allow restricting access, moderation, administrator-rights, etc. The API is documented however, and creation of a custom backend seems relatively easy to do.

By default, installing the github-provided release is most easily done via their included 'docker-compose.yaml', as listed on the README.MD file in the repo. While the mechanism works well, it lacks instructions on how to configure and run the software in a publically-accessible context instead of just on 'workadventure.localhost' as the README.MD explains you how to do.

The challenge for newcomers to docker comes with the way that the software is composed from multiple moving parts that are all required to be started alongside eachother. This is true of Work-Adventure itself which starts 4 service-containers all on its own; but becomes even more clear when you also want to host the JITSI-instance locally (instead of relying on jitsi.meet) and you want to use ssl-certs to make things work properly, as webrtc and CORS is rather picky about non-https content loaded into https-enabled sites.

All of the above can make an installation of work-adventure (with, or without Jitsi locally) a challenging endevour. This guide hopes to give some aid in understanding and configuring the infra.

Parts

Work-adventure

Work-adventure is found [on github] as a project deployed through 'docker-compose'. You do not need to know exactly the role of each container to get it to work with the install-guide supplied later, but it is handy to understand 'reverse-proxy', 'front' and 'maps', mainly. There is a '.env.template' file that should be copied to '.env' and edited for settings. (more about this later).

By default, the docker-compose file provisions the following containers:

• reverse-proxy: a 'traefik:v2.0' container from the public docker repo's. This is an auto-configuring proxy-service that can be crucial in getting things to run smoothly. Understanding what it does can be crucial to getting work-adventure and jitsi to work. This guide contains info about this, later.
• front: based on a 'node-js' image from TheCodingMachine docker-repo. Runs code for the interface part of the game. Has sprites for characters, login-screens, menu's, etc.
• pusher: tbd
• maps: Serves the 'map' files via an apache server. No active components
• back: tbd
• uploader: tbd
• messages: A container without a need of being reachable from the outside world; internally used to distribute/sync ProtoBuf messaging format between instances (i think)
• coturn: provides a TURN-server to allow NAT-traversal for those behind restricted/crippled networks. (not enabled yet on techinc infra; we use a public one)

JITSI

Jitsi is easily installed using [their github-repo for a docker-compose install]. There is an 'env.example' file that should be copied to .env and edited (more about this later).

Their docker-compose file provides the following containers:

• web: The frontend-service that clients talk to
• prosody: The XMPP service that carries text-messages and internal system-messages between parts.
• jicofo: Jitsi COnference FOcus; a part responsible in organizing video-connections between participants and the JitsiVideoBridge (jvb)
• jvb: The Jitsi Video Bridge server serves as a router for video-data; reducing bandwidth-load on participants.

Of note is that the jitsi-setup does not provide a config for use with Traefik by default, though there are some examples provided in 'examples' for traefik and kubernetes. Inspiration from these have been used to create a working docker-compose file using traefik v2.0 in a way that works well with Work-adventure

Understanding Docker and Traefik

If you are familiar with Traefik and docker, you can likely skip all this. If it is your first run-in with either, this chapter is likely essential to make any sense of what is going on in the install-instructions further on; though they will likely work well enough, regardless.

tbd.

Installation instructions

Pre-requisites and config

The setup instructions are written with the following assumptions in mind:

• you have a domain-name you have control over
• You have publically reachable IPv4 space
• You have a VM or physical hardware you want to dedicate to running jitsi+WA infra

It is likely other scenarios can be made to work, like hosting it on a DSL-line at home, with proper port-forwarding on your modem, or wanting to run the infra on a machine that also runs web-based services outside of a docker-context. These are definately possible, but are hard to cater for in this guide. Understanding the parts and how they go together will enable you to get things to work , however.

First steps:

• Set a wildcard DNS-record for *.whatever.your.domain.is to the publically reachable IP of the machine you want to host it on. Using a CNAME record works fine. It might be good to set TTL to 5mins at first
• Create a directory for all the parts we'll be installing (This guide assumes /opt for all of this)
• Install docker and docker-compose with apt-get install docker docker-compose if under a debian-like OS

Running Traefik and configuring docker-networking

By default, a container running traefik is started through the docker-compose.yaml file included with the work-adventure repo.

It is suggested to run any infra-structure that is shared between Jitsi and Work-adventure separately from either of them.

Currently the obvious candidates are:

• reverse-proxy: traefik, also handles LetsEncrypt
• coturn: a TURN-server for NAT-breaking, primarily used by Jitsi, but possibly also WorkAdventure (or other apps you might want to run on your instance)

We'll create a /opt/traefik-infra directory for this purpose

# mkdir /opt/traefik-infra

Now go into the traefik-infra directory and create 'docker-compose.yaml' file with the following contents:

version: '3'

services:
    reverse-proxy:
      image: traefik:v2.3
      command:
        - --log.level=WARN
        #- --api.insecure=true
        - --api.dashboard=true
        - --providers.docker.network=web
        - --providers.docker
        - --entryPoints.web.address=:80
        - --entrypoints.web.http.redirections.entryPoint.to=websecure
        - --entrypoints.web.http.redirections.entryPoint.scheme=https
        - --entryPoints.websecure.address=:443
        - --entryPoints.video.address=:10000/udp
        - --certificatesresolvers.le.acme.email=${ACME_EMAIL}
        - --certificatesresolvers.le.acme.storage=/etc/traefik/acme/acme.json
        # used during the challenge
        - --certificatesresolvers.le.acme.httpchallenge.entrypoint=web
      ports:
        - "80:80"
        - "443:443"
        # The Web UI (enabled by --api.insecure=true)
        - "8080:8080"
      volumes:
        - /var/run/docker.sock:/var/run/docker.sock
        - "${CERT_LOCATION}:/etc/traefik/acme"
      restart: unless-stopped
      labels:
        - "traefik.enable=true"
        - "traefik.http.services.traefik.loadbalancer.server.port=888"
        - "traefik.http.routers.traefik.rule=Host(`admin.${DOMAIN}`)"
        - "traefik.http.routers.traefik.entrypoints=websecure"
        - "traefik.http.routers.traefik.tls.certresolver=le"
        - "traefik.http.routers.traefik.service=api@internal"
        - "traefik.http.routers.traefik.middlewares=traefik-auth"
        # You should modify the line below to set a password for your Traefik-dashboard
        #- "traefik.http.middlewares.traefik-auth.basicauth.users=admin:"
      networks:
        web:
        meet.jitsi:

# Still working on a useful COTURN setup. Included for later use.
#    coturn:
#      image: coturn/coturn:4.5.2
#      command:
#        - turnserver
#        - --log-file=stdout
#        - --external-ip=$$(detect-external-ip)
#        - --listening-port=3478
#        - --min-port=10000
#        - --max-port=10010
#        - --tls-listening-port=5349
#        - --listening-ip=0.0.0.0
#        - --realm=coturn.${DOMAIN}
#        - --server-name=coturn.${DOMAIN}
#        - --lt-cred-mech
#        # Enable Coturn "REST API" to validate temporary passwords.
#        # - --use-auth-secret
#        # - --static-auth-secret=SomeStaticAuthSecret
#        # - --userdb=/var/lib/turn/turndb
#        - --user=workadventure:WorkAdventure123
#        # use real-valid certificate/privatekey files
#        # - --cert=/root/letsencrypt/fullchain.pem
#        # - --pkey=/root/letsencrypt/privkey.pem
#      network_mode: host
 
networks:
  meet.jitsi:
  web:
    external: true

Create the file .env with the following contents:

DOMAIN=some.domain.tld
# These are not used yet
TURN_SERVER=
TURN_USER=
TURN_PASSWORD=

# The email address used by Let's encrypt to send renewal warnings (compulsory)
ACME_EMAIL=my_letsencrypt_contact@email.addressA
# The directory on your OS that Traefik will store all ACME-produced certs in
CERT_LOCATION=/etc/traefik/acme

The last thing to do is to tell Docker that we want it to create a network-bridge called web that we have referred to in our config.

# docker create network web

Awesome. At this point, if all is well, you should be able to start the traefik-container using the command below, and you should be able to find the Traefik dashboard on admin.your.domain.tld

# docker-compose up
<nowiki>

If all went well, the only thing left to do is to create a password for the an admin-user. Edit 'password' in the following command and cut-n-paste the output to the docker-compose.yml file at the obvious spot provided; currently commented out.
 <nowiki>
echo $(htpasswd -nb admin password) | sed -e s/\\$/\\$\\$/g 

There are also ways of using password-files or other mechanisms to provide authentication for the Traefik-dashboard (or other places). This is left as an excersize for the reader. Good luck.

Once Traefik is up-and-running like this, move to setting up WorkAdventure

Work-Adventure

Installing work-adventure is as simple as:

• Pulling the [workadventure github repo]
• Copying the .env.example file to .env and editing it (changing settings and adding some new ones)
• Replacing the docker-compose.yaml file by an edited with the following changes:
  • Has understanding for the '$DOMAIN' environment variable
  • Has 'traefik' removed from it (we are running one already)
  • Has 'coturn' remove from it (we are running one already)

First, get the github repo:

# cd /opt
# https://github.com/thecodingmachine/workadventure.git

Now we create a /opt/workadventure/.env file, supporting the DOMAIN variable that allows setting all the host-names properly in one go. Be sure to edit the 'your.domain.tld' part in all three places.

 The base domain
DOMAIN=your.domain.tld

DEBUG_MODE=false
# Use jitsi.meet if you want to test out workadventure jitsi integration before you have managed to set up your own jitsi
JITSI_URL=meet.your.domain.tld
#JITSI_URL=meet.jit.si
# If your Jitsi environment has authentication set up, you MUST set JITSI_PRIVATE_MODE to "true" and you MUST pass a SECRET_JITSI_KEY to generate the JWT secret
JITSI_PRIVATE_MODE=false
JITSI_ISS=
SECRET_JITSI_KEY=



# The URL used by default, in the form: "/_/global/map/url.json"
START_ROOM_URL=/_/global/maps.your.domain.tld/Floor0/floor0.json

# These are used for the admin backend which is yet-to-be-created (not supplied with the open source version)
#ADMIN_API_TOKEN=123
#ADMIN_API_URL=to-be-determined
#
#
# URL of the TURN server (needed to "punch a hole" through some networks for P2P connections (future work)
#TURN_SERVER=
#TURN_USER=
#TURN_PASSWORD=
#
# If your Turn server is configured to use the Turn REST API, you should put the shared auth secret here.
# If you are using Coturn, this is the value of the "static-auth-secret" parameter in your coturn config file.
# Keep empty if you are sharing hard coded / clear text credentials.
#TURN_STATIC_AUTH_SECRET=

Once that has been done, make a backup of the supplied docker-compose.yaml file that comes with workadventure and replace it with the following one:

version: "3.3"
services:

  front:
    image: thecodingmachine/workadventure-front:master
    environment:
      DEBUG_MODE: "$DEBUG_MODE"
      JITSI_URL: $JITSI_URL
      JITSI_PRIVATE_MODE: "$JITSI_PRIVATE_MODE"
      API_URL: pusher.${DOMAIN}
      TURN_SERVER: "${TURN_SERVER}"
      TURN_USER: "${TURN_USER}"
      TURN_PASSWORD: "${TURN_PASSWORD}"
      START_ROOM_URL: "${START_ROOM_URL}"
    labels:
      - "traefik.http.routers.front.rule=Host(`play.${DOMAIN}`)"
      - "traefik.http.routers.front.entryPoints=web"
      - "traefik.http.services.front.loadbalancer.server.port=80"
      - "traefik.http.routers.front-ssl.rule=Host(`play.${DOMAIN}`)"
      - "traefik.http.routers.front-ssl.entryPoints=websecure"
      - "traefik.http.routers.front-ssl.tls=true"
      - "traefik.http.routers.front-ssl.service=front"
      - "traefik.http.routers.front-ssl.tls.certresolver=le"
    restart: unless-stopped
    networks:
      web:

  pusher:
    image: thecodingmachine/workadventure-pusher:master
    command: yarn run runprod
    environment:
      SECRET_JITSI_KEY: "$SECRET_JITSI_KEY"
      SECRET_KEY: yourSecretKey
      API_URL: back:50051
      JITSI_URL: $JITSI_URL
      JITSI_ISS: $JITSI_ISS
    labels:
      - "traefik.http.routers.pusher.rule=Host(`pusher.${DOMAIN}`)"
      - "traefik.http.routers.pusher.entryPoints=web"
      - "traefik.http.services.pusher.loadbalancer.server.port=8080"
      - "traefik.http.routers.pusher-ssl.rule=Host(`pusher.${DOMAIN}`)"
      - "traefik.http.routers.pusher-ssl.entryPoints=websecure"
      - "traefik.http.routers.pusher-ssl.tls=true"
      - "traefik.http.routers.pusher-ssl.service=pusher"
      - "traefik.http.routers.pusher-ssl.tls.certresolver=le"
    restart: unless-stopped
    networks:
      web:

  back:
    image: thecodingmachine/workadventure-back:master
    command: yarn run runprod
    environment:
      SECRET_JITSI_KEY: "$SECRET_JITSI_KEY"
      ADMIN_API_TOKEN: "$ADMIN_API_TOKEN"
      ADMIN_API_URL: "$ADMIN_API_URL"
      JITSI_URL: $JITSI_URL
      JITSI_ISS: $JITSI_ISS
    labels:
      - "traefik.http.routers.back.rule=Host(`api.${DOMAIN}`)"
      - "traefik.http.routers.back.entryPoints=web"
      - "traefik.http.services.back.loadbalancer.server.port=8080"
      - "traefik.http.routers.back-ssl.rule=Host(`api.${DOMAIN}`)"
      - "traefik.http.routers.back-ssl.entryPoints=websecure"
      - "traefik.http.routers.back-ssl.tls=true"
      - "traefik.http.routers.back-ssl.service=back"
      - "traefik.http.routers.back-ssl.tls.certresolver=le"
    restart: unless-stopped
    networks:
      web:

  maps:
    image: thecodingmachine/nodejs:12-apache
    environment:
      DEBUG_MODE: "$DEBUG_MODE"
      HOST: "0.0.0.0"
      NODE_ENV: development
      #APACHE_DOCUMENT_ROOT: dist/
      #APACHE_EXTENSIONS: headers
      #APACHE_EXTENSION_HEADERS: 1
      STARTUP_COMMAND_0: sudo a2enmod headers
      STARTUP_COMMAND_1: yarn install
      STARTUP_COMMAND_2: yarn run dev &
    volumes:
      - ./maps:/var/www/html
    labels:
      - "traefik.http.routers.maps.rule=Host(`maps.${DOMAIN}`)"
      - "traefik.http.routers.maps.entryPoints=web"
      - "traefik.http.services.maps.loadbalancer.server.port=80"
      - "traefik.http.routers.maps-ssl.rule=Host(`maps.${DOMAIN}`)"
      - "traefik.http.routers.maps-ssl.entryPoints=websecure"
      - "traefik.http.routers.maps-ssl.tls=true"
      - "traefik.http.routers.maps-ssl.service=maps"
      - "traefik.http.routers.maps-ssl.tls.certresolver=le"
    networks:
      web:

networks:
  web:
    external: true

Once the .env and docker-compose.yaml files are in place, you should be able to start the project. It will fetch the required repo's and after a short time compiling some code and doing some checks, you should be able to visit your work-adventure instance on play.your.domain.tld:

# cd /opt/workadventure
# docker-compose up

Check to see if basic functionality works. There are some meeting-rooms in the default map you can join to test the jitsi-integration with meet.jit.si If this seems to generally work, move on to setting up your own jitsi

Jitsi

A general guide for running JITSI via DOCKER can be found [here]

Installing Jitsi is as simple as:

• Pulling the [Jitsi Docker repo] from github
• Copying the env.example file to .env and extending it with a 'HOSTNAME' and editing PUBLIC_URL
• Running a script that creates random passwords for between the JITSI parts (./gen-passwords.sh)
• Creating a set of CONFIG dirs (see guide-url above)
• Replacing docker-compose.yaml file with one adjusted for our setup

First things first; fetch the git-repo of the dockerized jitsi-meet:

# cd /opt
# git clone https://github.com/jitsi/docker-jitsi-meet.git

Now copy the env.example file to .env and edit it; mainly the adding HOSTNAME and changing PUBLIC_URL

...
# System time zone
TZ=UTC

HOSTNAME=meet.your.domain.tld
# Public URL for the web service (required)
PUBLIC_URL=https://meet.your.domain.tld
...

Once that's done, we run the provided shell-script that sets random passwords for all the jitsi-parts to use between themselves.

# ./gen-passwords.sh

Jitsi's dockerized setup stores settings in the /root/.jitsi-meet-cfg/ on the host. Create the required directories with the command below:

mkdir -p ~/.jitsi-meet-cfg/{web/letsencrypt,transcripts,prosody/config,prosody/prosody-plugins-custom,jicofo,jvb,jigasi,jibri}
<nowiki>

Great, almost there. The most important part is the docker-compose.yml file which has been edited to work with our traefik setup. Make a backup of the original and replace it with the one below:
 <nowiki>
version: '3'

services:
  # Frontend
    web:
        image: jitsi/web
        volumes:
            - ${CONFIG}/web:/config
            - ${CONFIG}/web/letsencrypt:/etc/letsencrypt
            - ${CONFIG}/transcripts:/usr/share/jitsi-meet/transcripts
        environment:
            - ENABLE_LETSENCRYPT
            - ENABLE_HTTP_REDIRECT
            - ENABLE_HSTS
            - ENABLE_XMPP_WEBSOCKET
            - DISABLE_HTTPS
            - LETSENCRYPT_DOMAIN
            - LETSENCRYPT_EMAIL
            - LETSENCRYPT_USE_STAGING
            - PUBLIC_URL
            - TZ
            - AMPLITUDE_ID
            - ANALYTICS_SCRIPT_URLS
            - ANALYTICS_WHITELISTED_EVENTS
            - BRIDGE_CHANNEL
            - CALLSTATS_CUSTOM_SCRIPT_URL
            - CALLSTATS_ID
            - CALLSTATS_SECRET
            - CHROME_EXTENSION_BANNER_JSON
            - CONFCODE_URL
            - CONFIG_EXTERNAL_CONNECT
            - DEPLOYMENTINFO_ENVIRONMENT
            - DEPLOYMENTINFO_ENVIRONMENT_TYPE
            - DEPLOYMENTINFO_USERREGION
            - DIALIN_NUMBERS_URL
            - DIALOUT_AUTH_URL
            - DIALOUT_CODES_URL
            - DROPBOX_APPKEY
            - DROPBOX_REDIRECT_URI
            - DYNAMIC_BRANDING_URL
            - ENABLE_AUDIO_PROCESSING
            - ENABLE_AUTH
            - ENABLE_CALENDAR
            - ENABLE_FILE_RECORDING_SERVICE
            - ENABLE_FILE_RECORDING_SERVICE_SHARING
            - ENABLE_GUESTS
            - ENABLE_IPV6
            - ENABLE_LIPSYNC
            - ENABLE_NO_AUDIO_DETECTION
            - ENABLE_P2P
            - ENABLE_PREJOIN_PAGE
            - ENABLE_WELCOME_PAGE
            - ENABLE_CLOSE_PAGE
            - ENABLE_RECORDING
            - ENABLE_REMB
            - ENABLE_REQUIRE_DISPLAY_NAME
            - ENABLE_SIMULCAST
            - ENABLE_STATS_ID
            - ENABLE_STEREO
            - ENABLE_SUBDOMAINS
            - ENABLE_TALK_WHILE_MUTED
            - ENABLE_TCC
            - ENABLE_TRANSCRIPTIONS
            - ETHERPAD_PUBLIC_URL
            - ETHERPAD_URL_BASE
            - GOOGLE_ANALYTICS_ID
            - GOOGLE_API_APP_CLIENT_ID
            - INVITE_SERVICE_URL
            - JICOFO_AUTH_USER
            - MATOMO_ENDPOINT
            - MATOMO_SITE_ID
            - MICROSOFT_API_APP_CLIENT_ID
            - NGINX_RESOLVER
            - NGINX_WORKER_PROCESSES
            - NGINX_WORKER_CONNECTIONS
            - PEOPLE_SEARCH_URL
            - RESOLUTION
            - RESOLUTION_MIN
            - RESOLUTION_WIDTH
            - RESOLUTION_WIDTH_MIN
            - START_AUDIO_ONLY
            - START_AUDIO_MUTED
            - DISABLE_AUDIO_LEVELS
            - ENABLE_NOISY_MIC_DETECTION
            - START_BITRATE
            - DESKTOP_SHARING_FRAMERATE_MIN
            - DESKTOP_SHARING_FRAMERATE_MAX
            - START_VIDEO_MUTED
            - TESTING_CAP_SCREENSHARE_BITRATE
            - TESTING_OCTO_PROBABILITY
            - XMPP_AUTH_DOMAIN
            - XMPP_BOSH_URL_BASE
            - XMPP_DOMAIN
            - XMPP_GUEST_DOMAIN
            - XMPP_MUC_DOMAIN
            - XMPP_RECORDER_DOMAIN
            - TOKEN_AUTH_URL
        networks:
            # traefik: change the following line to your external docker network 
            web:
            meet.jitsi:
              aliases:
                - ${XMPP_DOMAIN}

        labels:
            - "traefik.http.routers.jitsiweb-http.entrypoints=web"
            - "traefik.http.routers.jitsiweb-http.rule=Host(`${HOSTNAME}`)"
            - "traefik.http.services.jitsiweb-http.loadbalancer.server.port=80"
            - "traefik.http.routers.jitsiweb.entrypoints=websecure"
            - "traefik.http.routers.jitsiweb.rule=Host(`${HOSTNAME}`)"
            - "traefik.http.routers.jitsiweb.tls=true"
            - "traefik.http.routers.jitsiweb.tls.certresolver=le"
            # traefik: change the following line to your external docker network
            - "traefik.docker.network=web"

    # XMPP server
    prosody:
        image: jitsi/prosody
        expose:
            - '5222'
            - '5347'
            - '5280'
        volumes:
            - ${CONFIG}/prosody:/config
        environment:
            - AUTH_TYPE
            - ENABLE_AUTH
            - ENABLE_GUESTS
            - ENABLE_LOBBY
            - ENABLE_XMPP_WEBSOCKET
            - GLOBAL_MODULES
            - GLOBAL_CONFIG
            - LDAP_URL
            - LDAP_BASE
            - LDAP_BINDDN
            - LDAP_BINDPW
            - LDAP_FILTER
            - LDAP_AUTH_METHOD
            - LDAP_VERSION
            - LDAP_USE_TLS
            - LDAP_TLS_CIPHERS
            - LDAP_TLS_CHECK_PEER
            - LDAP_TLS_CACERT_FILE
            - LDAP_TLS_CACERT_DIR
            - LDAP_START_TLS
            - XMPP_DOMAIN
            - XMPP_AUTH_DOMAIN
            - XMPP_GUEST_DOMAIN
            - XMPP_MUC_DOMAIN
            - XMPP_INTERNAL_MUC_DOMAIN
            - XMPP_MODULES
            - XMPP_MUC_MODULES
            - XMPP_INTERNAL_MUC_MODULES
            - XMPP_RECORDER_DOMAIN
            - XMPP_CROSS_DOMAIN
            - JICOFO_COMPONENT_SECRET
            - JICOFO_AUTH_USER
            - JICOFO_AUTH_PASSWORD
            - JVB_AUTH_USER
            - JVB_AUTH_PASSWORD
            - JIGASI_XMPP_USER
            - JIGASI_XMPP_PASSWORD
            - JIBRI_XMPP_USER
            - JIBRI_XMPP_PASSWORD
            - JIBRI_RECORDER_USER
            - JIBRI_RECORDER_PASSWORD
            - JWT_APP_ID
            - JWT_APP_SECRET
            - JWT_ACCEPTED_ISSUERS
            - JWT_ACCEPTED_AUDIENCES
            - JWT_ASAP_KEYSERVER
            - JWT_ALLOW_EMPTY
            - JWT_AUTH_TYPE
            - JWT_TOKEN_AUTH_MODULE
            - LOG_LEVEL
            - PUBLIC_URL
            - TZ
        networks:
          meet.jitsi:
            aliases:
              - ${XMPP_SERVER}
          web:

    # Focus component
    jicofo:
        image: jitsi/jicofo
        volumes:
            - ${CONFIG}/jicofo:/config
        environment:
            - AUTH_TYPE
            - BRIDGE_AVG_PARTICIPANT_STRESS
            - BRIDGE_STRESS_THRESHOLD
            - ENABLE_AUTH
            - ENABLE_AUTO_OWNER
            - ENABLE_CODEC_VP8
            - ENABLE_CODEC_VP9
            - ENABLE_CODEC_H264
            - ENABLE_RECORDING
            - ENABLE_SCTP
            - JICOFO_COMPONENT_SECRET
            - JICOFO_AUTH_USER
            - JICOFO_AUTH_PASSWORD
            - JICOFO_ENABLE_BRIDGE_HEALTH_CHECKS
            - JICOFO_CONF_INITIAL_PARTICIPANT_WAIT_TIMEOUT
            - JICOFO_CONF_SINGLE_PARTICIPANT_TIMEOUT
            - JICOFO_ENABLE_HEALTH_CHECKS
            - JICOFO_SHORT_ID
            - JICOFO_RESERVATION_ENABLED
            - JICOFO_RESERVATION_REST_BASE_URL
            - JIBRI_BREWERY_MUC
            - JIBRI_REQUEST_RETRIES
            - JIBRI_PENDING_TIMEOUT
            - JIGASI_BREWERY_MUC
            - JIGASI_SIP_URI
            - JVB_BREWERY_MUC
            - MAX_BRIDGE_PARTICIPANTS
            - OCTO_BRIDGE_SELECTION_STRATEGY
            - TZ
            - XMPP_DOMAIN
            - XMPP_AUTH_DOMAIN
            - XMPP_INTERNAL_MUC_DOMAIN
            - XMPP_MUC_DOMAIN
            - XMPP_SERVER
        depends_on:
            - prosody
        networks:
          meet.jitsi:
          web:


    # Video bridge
    jvb:
        image: jitsi/jvb
        ports:
            - '${JVB_PORT}:${JVB_PORT}/udp'
            - '${JVB_TCP_MAPPED_PORT}:${JVB_TCP_PORT}'
        volumes:
            - ${CONFIG}/jvb:/config
        environment:
            - DOCKER_HOST_ADDRESS
            - XMPP_AUTH_DOMAIN
            - XMPP_INTERNAL_MUC_DOMAIN
            - XMPP_SERVER
            - JVB_AUTH_USER
            - JVB_AUTH_PASSWORD
            - JVB_BREWERY_MUC
            - JVB_PORT
            - JVB_TCP_HARVESTER_DISABLED
            - JVB_TCP_PORT
            - JVB_TCP_MAPPED_PORT
            - JVB_STUN_SERVERS
            - JVB_ENABLE_APIS
            - JVB_WS_DOMAIN
            - JVB_WS_SERVER_ID
            - PUBLIC_URL
            - TZ
        depends_on:
            - prosody
        labels:
            traefik.udp.routers.jvb.entrypoints: video
            traefik.udp.routers.jvb.service: jvb
            traefik.udp.services.jvb.loadbalancer.server.port: 10000
        networks:
          meet.jitsi:
          web:


# Custom network so all services can communicate using a FQDN
networks:
  meet.jitsi:
  web:
    external: true

Awesome. You should now be able to start the project with docker-compose and be able to navigate to meet.your.domain.tld and check it out after a brief while allowing things to get started:

# docker-compose up

Reference material

• [Work-adventure github issue introducing better/easier configuration]