Difference between revisions of "SpaceAPI:Button"
Brainsmoke (talk | contribs) (→Wiring) |
Brainsmoke (talk | contribs) (→Power) |
||
| Line 28: | Line 28: | ||
==Power== | ==Power== | ||
| − | The nanode is now powered through | + | The nanode is now powered through a USB-port. |
| − | |||
| − | |||
| − | |||
| + | DO NOT power it using 9V current. There are some issues | ||
| + | with the voltage regulator (which is not used when fed | ||
| + | through (5V) USB.) | ||
== Notification App == | == Notification App == | ||
Revision as of 05:02, 2 November 2012
| Projects | |
|---|---|
| Participants | Brainsmoke, Guido, Realitygaps |
| Skills | nanode, arduino, basic electronics |
| Status | Active |
| Niche | Electronics |
| Purpose | Infrastructure |
Contents
Nanode code
https://github.com/techinc/SpaceButton
The code uses DHCP to obtain an IP address and find a gateway.
Wiring
The button is a circuit breaker. Connected to pin 3, it pulls this input pin to ground when not pressed.
The code enables the internal pull-up resistor, so no external one is needed.
The LED is connected to pin 5, also by means of a
pull-down circuit.
Power
The nanode is now powered through a USB-port.
DO NOT power it using 9V current. There are some issues with the voltage regulator (which is not used when fed through (5V) USB.)
Notification App
An Android app is available to monitor the current state of the space and notify when it changes. The source code is available on GitHub: Source
The app can be downloaded from Google Play or GitHub
