Difference between revisions of "Embroidery machine"
m |
m (link to the assembly and lots-of-other-info page of the cnc shield) |
||
| Line 34: | Line 34: | ||
** 2 [http://openbuildspartstore.com/motor-mount-plate/ Motor mount plates] | ** 2 [http://openbuildspartstore.com/motor-mount-plate/ Motor mount plates] | ||
* Electronic parts (ordered on 31 May 2014, in on 11 June 2014) | * Electronic parts (ordered on 31 May 2014, in on 11 June 2014) | ||
| − | ** [http://blog.protoneer.co.nz/arduino-cnc-grbl-shields-boards/ GRBL shield] | + | ** [http://blog.protoneer.co.nz/arduino-cnc-grbl-shields-boards/ GRBL shield] - [http://blog.protoneer.co.nz/arduino-cnc-shield-v3-00-assembly-guide/ assembly and instructions] |
** [http://www.pololu.com/product/1182/ Pololu stepper drivers] | ** [http://www.pololu.com/product/1182/ Pololu stepper drivers] | ||
** 2 [https://www.iprototype.nl/products/robotics/servo-motors/stepper-motor-4.8kg-cm stepper motors] | ** 2 [https://www.iprototype.nl/products/robotics/servo-motors/stepper-motor-4.8kg-cm stepper motors] | ||
Revision as of 00:56, 12 June 2014
| Projects | |
|---|---|
| Participants | Narya |
| Skills | Electronics, Coding |
| Status | Getting parts |
| Niche | Electronics |
| Purpose | Use in other project |
An idea that was put forward on IRC: make a computerized embroidery machine. Something that could work with SVG images would be nice.
Contents
Links
Projects found on the interweb
- 2006, no documentation
- Lego
- Forum thread
- Makezine computerized sewing machine and here
- Openbuilds sausagePaws 2014 (will use this as basis)
Sewing machine embroidery by hand
Shops
List of stuff
XY frame
- Stuff for frame (ordered on 31 May 2014)
- 1m V-slot rail
- 1.5m Belt
- 12 Wheels
- 2 Pulleys
- 2 Motor mount plates
- Electronic parts (ordered on 31 May 2014, in on 11 June 2014)
- In house?
- M3/M5 Bolts and nuts
- Plate to mount everything on (DIY)
- Arduino UNO
Sewing machine controller (only speed for now)
- http://www.instructables.com/id/Arduino-controlled-light-dimmer-The-circuit/
- something to measure the needle position
Software
- GCode Inkscape extension
- G code reference
- GCode parser and CNC controller
- Open source embroidery software
Build log
- 11 June 2014: soldered pins on the Pololu drivers and soldered the CNC shield
