SpaceAPI:Button

From Technologia Incognita
Revision as of 23:47, 26 August 2012 by Arda Xi (talk | contribs) (Added direct link.)
Jump to: navigation, search
Projects
Participants Brainsmoke, Guido, Realitygaps
Skills nanode, arduino, basic electronics
Status Active
Niche Electronics
Purpose Infrastructure

Nanode code

https://github.com/guidocalvano/spaceapi

Edit IP address to 10.68.0.42,


Edit Gateway to 10.68.0.1

Wiring

When the button is pressed, pin2 will be pulled to ground.

(Is there a pull-up resistor connected to pin2?)

Pin7 is used to control the led in the device.

Power

The nanode is now powered through the USB-port on the wireless router.

DO NOT power it any other way, there are some issues with the voltage regulator (which is not used when fed through USB.


Notification App

An Android app is available to monitor the current state of the space and notify when it changes. Both the binary and the source code are available on GitHub:

Binary

Source