SpaceAPI:Button
| Projects | |
|---|---|
| Participants | Brainsmoke, Guido, Realitygaps |
| Skills | nanode, arduino, basic electronics |
| Status | Active |
| Niche | Electronics |
| Purpose | Infrastructure |
Contents
Nanode code
https://github.com/guidocalvano/spaceapi
Edit IP address to 10.68.0.42,
Edit Gateway to 10.68.0.1
Wiring
When the button is pressed, pin2 will be pulled to ground.
(Is there a pull-up resistor connected to pin2?)
Pin7 is used to control the led in the device.
Power
The nanode is now powered through the USB-port on the wireless router.
DO NOT power it any other way, there are some issues with the voltage regulator (which is not used when fed through USB.
Notification App
An Android app is available to monitor the current state of the space and notify when it changes. The source code is available on GitHub: Source
The app can be downloaded from Google Play or GitHub
