Difference between revisions of "Indicio"
Line 32: | Line 32: | ||
* 2 = volume down | * 2 = volume down | ||
+ | == Beamer == | ||
+ | Here folows a quick walktrough of using the beamer trough the indicio server | ||
+ | === Start the beamer === | ||
+ | There is a small switch on the beamer on the side of the kitchen, if you turn it the buttons should turn orange. | ||
+ | Press the on button. | ||
+ | Make sure the beamer is on RGB 1. | ||
+ | |||
+ | === Setup server === | ||
+ | You should be able to ssh in to the server. | ||
+ | Use yout favorite editor to make a ~/.xinitrc file containing your favorite window manager, in this case awesome: | ||
+ | |||
+ | #~/xinitrc | ||
+ | # ---------- | ||
+ | #!/bin/sh | ||
+ | #exec awesome | ||
+ | |||
+ | Now you should be able to start the x server by typing | ||
+ | |||
+ | <code> | ||
+ | $ xinit | ||
+ | </code> | ||
[[Category:Service]] | [[Category:Service]] |
Revision as of 16:14, 14 July 2013
Indicio | |
---|---|
Hostname | Indicio |
IPv4 | 10.0.20.3 |
Function | MPD Server |
Location | Below the mixer |
Contact |
Indicio supports a few space features:
- MPD
- XMBC
- Printer server for the label printer and the laser printer
Inidicio is also permanently connected to the projector
Contents
Wiimote control for inidicio
Indicio can be controlled by wiimote, wciid runs in the background to connect it to uinput for X. At the moment all input from the wiimote is used for X controls.
- wiimote controls the mouse by using it's IR camera, the leds on the wall need to be turned on for this to work.
- turn the wiimote on by pressing the buttons 1 & 2 at the same time and wait untill the leds stop blinking
- turn the wiimote off by pressing the powerbutton on the wiimote for a few seconds
Gnome MPC mappings
- + = next song
- - = previous song
- home = play/pause
- 1 = volume up
- 2 = volume down
Beamer
Here folows a quick walktrough of using the beamer trough the indicio server
Start the beamer
There is a small switch on the beamer on the side of the kitchen, if you turn it the buttons should turn orange. Press the on button. Make sure the beamer is on RGB 1.
Setup server
You should be able to ssh in to the server. Use yout favorite editor to make a ~/.xinitrc file containing your favorite window manager, in this case awesome:
- ~/xinitrc
- ----------
- !/bin/sh
- exec awesome
Now you should be able to start the x server by typing
$ xinit