Difference between revisions of "X201/Coreboot"
Line 1: | Line 1: | ||
Page on getting coreboot installed on the X201 | Page on getting coreboot installed on the X201 | ||
+ | |||
+ | == Flashrom == | ||
+ | |||
+ | U can use flashrom to backup and write your flash. | ||
+ | |||
+ | flashrom download: https://www.flashrom.org/Downloads | ||
+ | |||
+ | === Raspberry PI === | ||
+ | |||
+ | https://www.flashrom.org/RaspberryPi | ||
+ | https://www.raspberrypi.org/documentation/usage/gpio/ | ||
+ | |||
+ | Here's how to connect the Raspberry pi GPIO to the chip. | ||
+ | |||
+ | <pre> | ||
+ | === front (display) ==== | ||
+ | 3.3V (pin 17) N/C (S)CLK/SCK (pin 23) MOSI (pin 19) | ||
+ | | | | | | ||
+ | dot | | | | | ||
+ | CS (pin 24) MISO (pin 21) N/C ground (pin 25) | ||
+ | === back (touchpad) === | ||
+ | </pre> | ||
+ | |||
+ | |||
== Issues == | == Issues == |
Revision as of 21:08, 17 March 2016
Page on getting coreboot installed on the X201
Flashrom
U can use flashrom to backup and write your flash.
flashrom download: https://www.flashrom.org/Downloads
Raspberry PI
https://www.flashrom.org/RaspberryPi https://www.raspberrypi.org/documentation/usage/gpio/
Here's how to connect the Raspberry pi GPIO to the chip.
=== front (display) ==== 3.3V (pin 17) N/C (S)CLK/SCK (pin 23) MOSI (pin 19) | | | | dot | | | | CS (pin 24) MISO (pin 21) N/C ground (pin 25) === back (touchpad) ===
Issues
- as per 2016-03-15 the last working coreboot version was: a3e41c089602c58409e8dfd4aceecbdd7d4f4a5b
Files
- Datasheet of flashchip: 25L6445E