Difference between revisions of "User:Chotee/ultranoise"
(Created page with "The idea is to have a µC output random noise in the 25K to 70Khz range since it's very likely there's spillover into the <20K range, we hook it in so that it only runs then t...") |
(No difference)
|
Revision as of 13:52, 14 February 2019
The idea is to have a µC output random noise in the 25K to 70Khz range since it's very likely there's spillover into the <20K range, we hook it in so that it only runs then the space is closed.
Parts needed:
- MicroController with network
- Tweeters
- Amplifier that does these frequencies well (normal audio have low performance at these frequencies)
- Case/housing
- Some Indicator lights (power, network-ok, active)
- Power source.
Notes:
- Random patterns work best. Unpredictable patterns.
Ideas:
- Get the state from the MQTT topic
- Have a 5 min delay on the activation
Possible parts:
Similar commercial products:
References:
- About Ultrasound speakers: https://www.diyaudio.com/forums/planars-and-exotics/212650-ultrasound-speaker-20khz.html
