Difference between revisions of "Reset Baytech to Defaults"

From Technologia Incognita
Jump to: navigation, search
(Created page with "In case the username or password is unknown, you have to reset the Baytech RPC-28A to factory defaults using the following method: 1. Turn the power of to the RPC unit 2...")
 
(Added instructions to factory-default reset the baytech powerbars)
 
Line 19: Line 19:
 
[[File:Evernote Camera Roll 20130118 091122.jpg|400px]]
 
[[File:Evernote Camera Roll 20130118 091122.jpg|400px]]
  
take care to remove enough screws (four in my case) to prevent irrevocable bending of the aluminum strip
+
take care to remove enough screws (four in my case) to prevent irreversible bending of the aluminum strip
  
 
[[File:Evernote Camera Roll 20130118 091128.jpg|400px]]
 
[[File:Evernote Camera Roll 20130118 091128.jpg|400px]]
Line 26: Line 26:
  
 
[[File:Evernote Camera Roll 20130118 091133.jpg|400px]]
 
[[File:Evernote Camera Roll 20130118 091133.jpg|400px]]
 +
 +
[[File:Evernote Camera Roll 20130118 091138.jpg|400px]]
  
 
place a jumper, power on, wait 15 seconds, power down, remove jumper: profit!
 
place a jumper, power on, wait 15 seconds, power down, remove jumper: profit!
 
[[File:Evernote Camera Roll 20130118 091138.jpg|400px]]
 

Latest revision as of 12:32, 18 January 2013

In case the username or password is unknown, you have to reset the Baytech RPC-28A to factory defaults using the following method:

 1. Turn the power of to the RPC unit
 2. Remove the panel to the left of the BayTech logo on the front of the unit
 3. Directly behind the BayTech logo at the top you’ll see a 2 pin jumper
 4. Place a jumper on those 2 pins and power up for 15 seconds
 5. Turn power off, and remove the jumper


The unit will now be rest to factory default

Here is where to find the jumper.

Evernote Camera Roll 20130118 091122.jpg

take care to remove enough screws (four in my case) to prevent irreversible bending of the aluminum strip

Evernote Camera Roll 20130118 091128.jpg

The jumper is on the left of the cpu socket

Evernote Camera Roll 20130118 091133.jpg

Evernote Camera Roll 20130118 091138.jpg

place a jumper, power on, wait 15 seconds, power down, remove jumper: profit!