LINSN LED strips

From Technologia Incognita
Revision as of 13:03, 26 September 2013 by Justa (talk | contribs) (Chips)
Jump to: navigation, search
Projects
LINSN LED.jpg
Participants Epidemik, Justa
Skills Basic electronics, Reverse engineering firmware
Status Active
Niche Electronics
Purpose Fun

Background

Owner of the LED mats has about 40m2 in total, has multiple power supplies but no "control box". The power supplies contain a Receiver Card, the missing component is the Sender Card.

The owner would like to hang some mats on the side of his van when parked at events, so he can display text (dynamically). Since he only needs a small amount of the mats, the unused mats need the same.


Type / Protocol

LINSN LED


Manufacturer:

Radiant Opto Electronics http://www.roeled.com/


Model:

LED Curtain Screen Linx-30(?)

http://www.roeled.com/products/led-curtain-screen-linx-30.html

Chips

[16-bit Shift Register with latch, output-enable and adjustabble constant-current drivers:]

  • MBI5024GP <-- partnumber; made by 'Macroblock'
  • DP317811HB <-- Trackingnumber

8-port bi-directional high-Z transciever (aka: [octal line driver]) or [Octal Bus transceiver, 3-state])

  • (74)HC245 <-- 74xx series TTL 'Highspeed Cmos', partnumber 245
  • 9A8D407 <-- Internal numbering/tracking/package-info
  • UuG920E <-- Same
  • NXP <-- NXP corp; formerly Philips Semiconductors

Boards / Boxes

Receiving Card: http://www.ledcontrolcard.com/led-receiving-card-c-15_20/linsn-rv802-led-receiving-card-p-46.html

Sending Card (?): http://www.ledcontrolcard.com/led-sending-card-c-15_19/linsn-ts801d-led-control-cardsd801d-and-l202-led-card-p-4.html


Photos

http://imgur.com/a/c4jsS


Suggested Approach

- Using a Logic Analyzer to sniff the data between a Sending- and Receiving Card.