You do not have permission to edit this page, for the following reason:
The action you have requested is limited to users in the group: emailconfirmed.
This is a large, heavily built CNC-mill. It is not yet operational as the controllers need to be re-worked or replaced; but the mechanics are expected to generally work without further modification.
Special note should be taken that:
- The end-stop of the Z-axis is a small hall-sensor that needs to be affixed again in it's proper location OR replaced with an end-stop switch instead.
- The Spindle motor seems to be having a fault; could be brushes, could be something else. NOTE: 36Volt AC !!!! Comes from controller-box!!!
- The controller-box needs inspection and deserves some re-work. Note that the G-code interpreter is...not quite-up-to-par regarding modern standards/expectations
This is a minor edit
Watch this page