Baytech-inc

From Technologia Incognita
Revision as of 12:15, 18 January 2013 by Axello (talk | contribs)
Jump to: navigation, search
Projects
Participants Axello, Meridion, Voidz0r, Wizzup
Skills Electronics, scripting, RS-232
Status Active
Niche Electronics
Purpose Infrastructure

There are three Baytech RPC28A powerbars which can be used for fun and infrastructure projects. Each RPC contains 21 IEC 'C13' connectors, the same as you can find on the end of a standard computer cable. We can either hack one RPC to use 'kroonsteentjes', or get some C14 connectors or cables.

Ruby Script to interface with the thingamagic on github

Unfortunately, the RJ-45 is totally incompatible with the standard blue Cisco cable. So, in the absence of spare DB-9 connectors, I have been trying to make a working serial cable out of junk parts: not handy.

In the end, when you know which wires to connect, it is very easy to make a cable to connect a DB-9 serial plug to the RJ-45 on the powerbar. The schematic is below

We can either use standard long ethernet wires with a DB-9 to RJ45 socket, which is handy if we would have an infrastructure with a patchpanel, or a dedicated RJ-45 to DB-9 cable. I made the latter. This cable has no RTS/CTS or DTR/DCD control, as that didn't seem to work.

Cable layout (using TIA568A wiring)
RJ-45 Colour DB-9
4 blue 2
5 blue/white 3
7 brown/white 5

There is the problem of the initial user + password on the baytechs we got from the Coloclue. There is a separate page to Reset Baytech to Defaults.

Settings for the serial port are 9600 8N1


Some ideas about the eventual system have been worked out at Cut/ElectricityManagement.

Documentation