AnusCopter

From Technologia Incognita
Revision as of 00:36, 8 December 2013 by The JinX (talk | contribs)
Jump to: navigation, search
Projects
AnusCopter.jpg
Participants Ranzbak, The JinX
Skills Soldering, Electronics, Coding, UI design
Status Getting parts
Niche Electronics
Purpose Fun

Components

HJ 450 "classic" frame

4x Turnigy D2822/17 1100KV Brushless

4x 8045 CW CCW Propellers

4x Turnigy Multistar 30 Amp Multi-rotor Brushless ESC

AeroQuad 32 Flight Control board v2

Turnigy 9X 2.4GHz 8Ch Receiver (V2)

2x Turnigy 2200mAh 3S (30C+35C) LIPO

XRF wireless RF radio UART RS232

LS20031 GPS

10 strand dupont cable female-female

6 female jumper leads

Velcro tape <3

XT60 and 3.5mm gold bullet connectors

Accessoires

XRF wireless RF radio UART RS232

Turnigy 9XR Transmitter Mode 2 + 11.1v (3s) 2200mAh 1.5C LIPO

Turnigy Accucel-6 50W 6A Balancer/Charger


In transit

4x Turnigy Multistar 30 Amp Multi-rotor Brushless ESC

FS-TH9X-B-Module

Some 8045 CW CCW Propellers

10x Male+Female XT60 connector

25x M3 7mm Philips head screw

XBee Explorer Dongle + Quad-band Cellular Antenna SMA + SMA connector for XRF

Build log

  • 2013-11-20 put AeroQuad in case
  • 2013-11-23 assembled body, screwed motors on with 16x M3 (~6mm)
  • 2013-11-26 charged batteries, added receiver and battery strap
  • 2013-11-27 battery monitor leads (and header for LEDs) added
  • 2013-12-04 XT60 to power board soldered
  • 2013-12-07 8x 3.5mm gold bullet connectors, installed ESCs, 6 pin micro JST to GPS

ToDo

Serial uplink (telemetry)

LEDs

Wait for TX :-(

T B A

Landing gear

Ultrasonic Range Finder (LV EZ-0)

Camera's and FPV transmitter / receiver

Links

Justa copter 1

STM32 flightcontroll

Aero Quad