Difference between revisions of "AnusCopter"
| Line 10: | Line 10: | ||
* 2013-11-20 put AeroQuad in case | * 2013-11-20 put AeroQuad in case | ||
* 2013-11-23 assembled body, screwed motors on with 16x M3 (~6mm) | * 2013-11-23 assembled body, screwed motors on with 16x M3 (~6mm) | ||
| + | * 2013-11-26 charged batteries, added receiver and battery strap | ||
==Ordered== | ==Ordered== | ||
4x Turnigy Multistar 30 Amp Multi-rotor Brushless ESC | 4x Turnigy Multistar 30 Amp Multi-rotor Brushless ESC | ||
| − | + | FS-TH9X-B-Module | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
24x 8045 CW CCW Propeller | 24x 8045 CW CCW Propeller | ||
| Line 30: | Line 25: | ||
AeroQuad 32 Flight Control board v2 | AeroQuad 32 Flight Control board v2 | ||
| + | |||
| + | Turnigy 9X 2.4GHz 8Ch Receiver (V2) | ||
| + | |||
| + | 2x Turnigy 2200mAh 3S (30C+35C) LIPO | ||
| + | |||
| + | ==Acessoires== | ||
| + | |||
| + | Turnigy 9XR Transmitter Mode 2 + 11.1v (3s) 2200mAh 1.5C LIPO | ||
| + | |||
| + | Turnigy Accucel-6 50W 6A Balancer/Charger | ||
=Links= | =Links= | ||
Revision as of 19:29, 26 November 2013
| Projects | |
|---|---|
| |
| Participants | Ranzbak, The JinX |
| Skills | Soldering, Electronics, Coding, UI design |
| Status | Getting parts |
| Niche | Electronics |
| Purpose | Fun |
Contents
WIP
- 2013-11-20 put AeroQuad in case
- 2013-11-23 assembled body, screwed motors on with 16x M3 (~6mm)
- 2013-11-26 charged batteries, added receiver and battery strap
Ordered
4x Turnigy Multistar 30 Amp Multi-rotor Brushless ESC
FS-TH9X-B-Module
24x 8045 CW CCW Propeller
Components
HJ 450 "classic" frame
4x Turnigy D2822/17 1100KV Brushless
AeroQuad 32 Flight Control board v2
Turnigy 9X 2.4GHz 8Ch Receiver (V2)
2x Turnigy 2200mAh 3S (30C+35C) LIPO
Acessoires
Turnigy 9XR Transmitter Mode 2 + 11.1v (3s) 2200mAh 1.5C LIPO
Turnigy Accucel-6 50W 6A Balancer/Charger
