AnusCopter
| Projects | |
|---|---|
| |
| Participants | Ranzbak, The JinX |
| Skills | Soldering, Electronics, Coding, UI design |
| Status | Getting parts |
| Niche | Electronics |
| Purpose | Fun |
Build log
- 2013-11-20 put AeroQuad in case
- 2013-11-23 assembled body, screwed motors on with 16x M3 (~6mm)
- 2013-11-26 charged batteries, added receiver and battery strap
In transit
4x Turnigy Multistar 30 Amp Multi-rotor Brushless ESC
FS-TH9X-B-Module
24x 8045 CW CCW Propeller
10x Male+Female XT60 connector
25x M3 7mm Philips head screw
Components
HJ 450 "classic" frame
4x Turnigy D2822/17 1100KV Brushless
AeroQuad 32 Flight Control board v2
Turnigy 9X 2.4GHz 8Ch Receiver (V2)
2x Turnigy 2200mAh 3S (30C+35C) LIPO
2x XRF wireless RF radio UART RS232
10 strand dupont cable female-female
Velcro tape <3
Accessoires
Turnigy 9XR Transmitter Mode 2 + 11.1v (3s) 2200mAh 1.5C LIPO
Turnigy Accucel-6 50W 6A Balancer/Charger
ToDo
Installing ESCs
Power wiring (and LIPO monitoring)
