2020 Stay The F*** home Techinc Solder Kit
| Projects | |
|---|---|
| |
| Participants | |
| Skills | PCB Design, Soldering |
| Status | Active |
| Niche | Electronics |
| Purpose | World domination |
2020 Stay The F*** Home Techinc Solder Kit
Following Hack42 and Revspace, Techinc now also has its own 25mm radius round object! Since many of you may suffer from flux-resin withdrawal due to the space being closed, and because the space could do with some extra cash, said round object will be for sale as an SMD solder kit! The kit will include a PCB, a pre-programmed microcontroller, a battery holder, LEDs to taste, a bit of solder (, if requested) and some passives.
I Brainsmoke (talk), will reimburse myself for the material costs, the rest of the money will go to the association.
-
Top side -
Bottom side -
PCB in action
What does it do?
- Show an animation
- Show a custom animation sent via 9600 baud UART [8 bytes of brightness values]
The badge can be powered either using a cr2032 battery, or externally, up to 5V.
What does it cost?
| product cost | shipping* | total cost | |
|---|---|---|---|
| Techinc 2020 PCB (bare PCB only) | EUR 7 | EUR 2* | EUR 9* |
| Techinc 2020 PCB Solder Kit | EUR 10 | EUR 2* | EUR 12* |
| Techinc 2020 PCB already-soldered | EUR 40 | EUR 2* | EUR 42* |
*) cost for shipping within the Netherlands, I will research international shipping upon request.
What to do?
- Select a configuration of LEDs: https://pizzadoos.com/ledselect/ (JavaScript required)
- Send your selected configuration & your address to tipcb2020 ÅŤ pizzadoos.com
Solder instructions
More instructions will follow, however, they're similar to: PCB_Techinc_Logo
MCU Code
https://github.com/brainsmoke/charliepdk
FAQ
* What MCU is used? the used MCU is a Padauk PFS154, but the design is also pin-compatible with the Attiny2x2 series as well as (some?) SOP8 PIC micros * Can the MCU be programmed in-circuit? Sadly no, but you can display custom animations using a UART rx pin