Industrial sewing machine
| TechInc Inventory | |
|---|---|
| |
| Description | stitches things (fabric, fingers, ...) |
| Make | Pfaff |
| Model | 238 |
| Category | Sewing |
| Operational Status | BROKEN |
| Super Users | User:Narya, Braam, User:Bigmac |
| Received at | 2013/06/21 |
| Acquisition Details | Brought to the space by Braam and Narya |
| Owner | Braam, Bigmac |
Contents
Ready to be repaired
There is a new shuttle for the machine.
Piece can be found tin the little drawer under the table.
Oberoid can do it. Repairman known by Bigmac can do it - Hans Volger http://www.hansvolger.nl/ - please call him and make an appointment at techinc, he's been there before. Bigmac will pay for the repair cost of 75 euro.
BROKEN 6/19/2016
Today the machine was found in a very sorry state:
- apparently someone broke a pin off the mains plug... but did not fix it nor warn anyone
- the bobbin housing (bottom thread) was covered in sticky brownish gunk - unclear if it was cola or coffee (with sugar) but some drink was obviously spilled into the sewing machine - but nobody cleaned this nor reported this
- the top oil reservoir was EMPTY. This is an auto-lubricating machine on many points, but only if the reservoir has oil!
- the plastic plug closing off the top oil reservoir refill hole is missing. This is the normal way to refill oil - take out plug, add sewing machine oil. If there is no plug, the reservoir will empty all over your work the first time you lift up the machine for some maintenance. We put some tape over the hole.
Braam was kind enough to resolve all issues, but really people... Please don't touch that machine until you have had personal training in using and maintaining it!
Usage
Ask one of the super users for instructions before use.
If something is broken, do not fix it yourself and contact the owners (they can be reached via Narya).
Last service check was on Wednesday 6 November 2013
Wear (safety) glasses! The machine runs much faster than ordinary sewing machines and is much more powerful. Just think of what could happen when the needle breaks..
How the machine works
Manual
Oil
Only use thin sewing oil!! (so no wd40 or other stuff) The right type of oil is in the drawer.
- One or two drops of oil on all points. Frequency: every two weeks (Narya will do this)
- One or two drops in the housing of the spool. Frequency: every time you use the machine (should be done by the one who uses it)
- Oil container on the top needs to have sufficient oil (red label should be below the oil surface). Check the level every time you use it.
- Wipe the tray below the machine. Frequency: every time you use it
Needle
Flat side of the needle should be on the rear side
Thread
How to install the thread
When you start sewing
- First, put needle into the fabric by hand, only after that start sewing. Otherwise, you'll easily break needles or do other damage.
