Lulzbot TAZ 3D Printer service log

From Technologia Incognita
Revision as of 10:13, 17 October 2014 by Hamish (talk | contribs) (Created page with "Service log ---- '''Oct 17 2014''' Actions: * Serviced the extruder/hot end. * Has been taken apart completely * Removed stuck filament * unclogged nozzle * put toge...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Service log

Oct 17 2014

Actions:

  • Serviced the extruder/hot end.
  • Has been taken apart completely
  • Removed stuck filament
  • unclogged nozzle
  • put together
  • Made a 4 1/2 hour test print

Result:

See attached image:

  • infill is much better, extrusing seems to be going well now.

To do:

  • Tune slicer setting for speed.
Retrieved from "https://wiki.techinc.nl/index.php?title=Lulzbot_TAZ_3D_Printer_service_log&oldid=13610"