Stapled felt cover for E-Book reader
Projects | |
---|---|
![]() | |
Participants | Becha |
Skills | stapling |
Status | Finished |
Niche | Sewing |
Purpose | Fun |
Quick hack: I made a cover for E-book reader using stapler :) It took me an hour, and I had all the materials at home, but they are really easy to find (...mostly Hema).
Step by step instructions
What you need is: felt, velcro, stapler, scissors.
- Cut felt to measure: size of E-Book reader + 1cm extra on every side.
- Staple the outer corners first, planning to have them as "triangles". I started with 2 staples on each side...
- ... but that was too little so I added 3rd staple. // Cut the "triangles" off.
- Now, add one of the inner corners. Staple on the narrow side of "reader".
- Then fold the cover, and staple from the OUTSIDE of the wide side of the "reader".
- Try if the reader fits in, and adjust by stapling extra here-and-there.
- For the "closing" mechanism: cut the ribbons, and staple them to the end of "flap".
- Cut velcro in pieces that fit the width of ribbons.
- Staple velcro to the "bottom" of the cover.
- Next, staple velcro to the ribbon. Cut the excess of ribbon.
- Add some extra staples, to make velcro more attached to the ribbon.
- This is how it looks finished, from the outside!
- This is the final look, when open.