Difference between revisions of "Wild TA-10"
(→Control buttons) |
|||
Line 68: | Line 68: | ||
|Power|| Turns the machine on | |Power|| Turns the machine on | ||
|- | |- | ||
− | | | + | |... |
+ | |- | ||
+ | |Manual stop || When LED is lit, device will not accept movement commands | ||
|} | |} | ||
Revision as of 13:18, 29 August 2013
TechInc Inventory | |
---|---|
![]() | |
Description | Vinyl Cutting Plotter |
Make | Wild |
Model | TA-10 |
Category | Mechanics |
Operational Status | Functional |
Super Users | User:Justa |
Received at | |
Acquisition Details | Picked up from a college |
Owner | TechInc |
Contents
Wild TA-10 Vinyl Cutting Plotter
Status
We figured out how to talk to it, use the DB9 to connect to it; 9600BPS 8n1 , hardware flowcontrol (rts/cts).
Refer to the documentation below about how to get the device to do it's work for you. Currently your options are:
- Use a specially prepared version of ps2edit that has a driver for 'ta10'; this will provide documented below
- Use the 'EuroCut Basic 7' program under windows if you can find a valid license
- Use the information in this document to write your own driver/application that sends commands directly.
- In the near future we hope to have the ps2edit work lead to a CUPS-compatible postscript printer usable over network
The machine has some parts that have been fixed/restored to proper functionality. Note that the machine is a work of fine mechanic art and is not for [DAS GEFINGERPOKEN UND DAS MITTENGRABEN. IST NICHT FÜR GEWERKEN BEI DUMMKOPFEN.]
This means that you will need to be careful with it. Consult someone experienced with the machine if you are going to do something *special* that risks jamming the machine, putting undue force on parts, make dust/smoke/shrapnel, etc.
Please also take care of personal safety. The tool-arm does not have a soul nor eyes. It wont care that it smashed into your glasses while you were too close to it.
Project Box
There is a project-box related to this device. It contains a number of parts and accessories to the device. Including the cutter-head and adjustment-collar. Please return the pens and/or cutter-heads back to the project-box for safe storage. There is a significant risk of the tool-grippers breaking if a tool is left stored on the device when not in use. Since they are stiffly fixed to the tool-gripper, a simple bump against one of the tools might cause the tool-gripper to break (again).
Features
Tool head
The device has a tool-arm (grey) with a default solenoid-based toolhead attached to it (orange).
The toolhead has two metal clamps with thumbscrews to insert a tool into (typically a pen or a tangential cutting tool). These clamps are delicate and care should be taken to not put too much mechanical force on them. Especially sideways force will likely result in breakage; be careful! The toolhead has a set of work-lights below it that light up the work-surface. They can be switched on/off with a switch on the tool-arm. The tool-head has a set of knobs on it. The black ones allow you to push the tool down manually, the silver-ones allow you to 'unblock' a tool if it becomes jammed in some way. There is a power-connector between the two tool-clamps that carries current for accessories (FIXME: specs required)
The default tool-head can be either replaced or augmented; bolt-holes on the side of the tool-arm allow you to fix extra equipment to it. An internal DB9 interface (under orange plastic) allows you to create an interface between plotter and extra tools. The DB9 carries solenoid-signals, light-power, accessory-power and possibly more (FIXME: documentation needed). There is also a connector that seems to be meant for some thin-coax cable; possibly for sensing purposes.
Bed
The device features a large cutting bed made of a transparent material that lets the light through of the dimmable Tube-light array behind it. Please find the white dimmer-switch on the backside of the device. The bed seems to be fastened to the frame of the device with a series of spring-clamps which seem accessible for replacement/adjustment by accessing the inner space of the table by undoing the back-panels on the back of the table. When using markers with NONpermanent ink (aka: whiteboard markers), one can easily test a design first by drawing directly on the bed's surface. The bed is then easily cleaned with a damp cloth.
Tilting
Also on the backside is the tilt-lock handle for the table's angle. BE CAREFUL when pushing the articulated handle up; the weight of the table is considerable! The telescopic arm does have a spring inside to help carry some of the weight, however. Be ready to support weight and slowly unlock the handle until the table starts to move. Make sure to relock securely. Table can be put down until perfectly level and up until nearly upright. BE CAREFUL PUTTING IT TOO FAR UPRIGHT; the weight of the table is then all on one side; there is a risk of the device FALLING OVER FORWARDS.
Control Unit/Base
The whole table is supported by a hinge-assembly and a telescoping arm (see tilting, above), on a base-unit which houses the power-supply and the control-unit of the device. The control-unit consists of an small internal 19" controller-card rack which houses a number of user-replaceable cards. Some are obvious communication and servo-amplifier cards; others are less clear. Card-positions are listed on the inside of the hatch. On the other side are a series of fuses and an hour-of-service counter on the hatch that covers the Power-supply of the device.
Control Pendant
There is a control-pendant that's attached to the device by a cable and can be fixed to the side of the table by means of the magnet on the back of it. It provides step-precision control of the head, choosing the pen and setting a number of parameters of operation (window, origin, etc). Keeping the direction-control buttons for longer periods will increase the speed of the head.
Control buttons
The control-buttons on the edge of the table also allow for a number of the controls that are possible via the control pendant; as well as allowing you to switch the device on/off and such.
Layout and function:
Label | Function |
---|---|
Power | Turns the machine on |
... | |
Manual stop | When LED is lit, device will not accept movement commands |
Material trough
On the left side, next to the cutting bed, there is a trough that allows rolls of base-material to be kept there; unrolling a section of it across the bed for cutting/plotting. There is a matching tool-holder that fits in this trough that houses pens suitable for the machine.
Tangential Cutting-head
There is a cutting-head accessory that came with this device. It's main function is as a servo/stepper actuated roto-knife that makes sure that the knife cuts in the direction of movement that the tool-arm is heading. This prevents the need for resorting to a swivel-knife that'd have less perfect cuts in designs with a lot of angles. The cutting-head comes with an adjustment-collar that allows for easier depth-control. Find and return both the cutting-head and the adjustment-collar to the project-box they are stored in. Since the cutting-head protrudes quite a lot from the tool-arm, there is a great risk of damaging the tool-clamp if the cutter-head is left stored in the device when not in use.
Manual
plug in the power lead
hit the 'power on' button. make sure the 'manual stop' button is not pressed otherwise nothing will work
there is a VIA C3 pc, made of lego. it needs to be plugged in and attached to the network via the lack rack. it currently sits on the base of the plotter itself.
Log on to the machine via ssh on IP address 10.0.20.23 - for an account speak to brainsmoke/amx109/realitygaps/wizzup
The following only works for a single user, 'amran'. This will be ported to work globally/via a web interface soon
login to the box. make sure your user is part of the dialout group.
run the script located at
/home/amran/print.sh <path to your postscript file here>
this script will setup the correct port settings and do all the conversion and make the plotter 'print'.
Old information
Check the Serial port settings with
sudo stty -F /dev/ttyS0 -a
The settings should be 9600 8n1 with flow control on.
speed 9600 baud; rows 0; columns 0; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^H; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 5; -parenb -parodd cs8 hupcl -cstopb cread clocal crtscts ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany - imaxbel -iutf8 -opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 -isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop -echoprt -echoctl - echoke
the command to set these settings is
sudo stty -F /dev/ttyS0 9600 crtscts
Now, create the file you wish to 'plot' Save as postscript (.ps)
On the machine run
pstoedit -f ta10 <yourfile>.ps
this will output commands to the screen.
if you output to a file, this can be used to send all commands to the plotter in one go. the output file will also contain the 'initialisation' commands.
to print to the machine open a screen session
sudo screen /dev/ttyS0 9600,ctsrts
and paste in your commands
to exit press CTRL+A followed by K
UPDATE: works with echo command - as root, do
echo -e ":83\r\n:32\r\n:520,20:E3500\r\n\rP2\r\nU0,0\r\n:715\r\nU 0,0\r\nU 13424,0\r\nU 13424,10532\r\nU 0,10532\r\nU 0,0\r\nU 0,0\r\n" > /dev/ttyS0
UPDATE: pstoedit outputs wrong carriage returns
the file generated by pstoedit outputs \n, the plotter needs \r\n cat test | perl -nwe '$_ =~ s/\n/\r\n/g; print $_;' > testRN
Plans
The current plan is to work on fixing a number of defects on the table and making a software-layer between the 'broken hpgl' of the device and 'the real world'. Part of this work will be done during Tinkering thurs/tuesdays.
See 'features' for some of the jobs that need to be carried out.
Protocol
The serial protocol used appears to be an HP-GL like language. We captured the follow commands from the Eurocut driver. This driver always sent the same commands first, probably some initialisation:
:83 :32 :520,20 :E3500 P2 U0,0 :715
Selecting the universal head in Eurocut changes the :5 command to
:5250,250
To select pen / tool number <x>
P<x>
To set the move speed:
:7<speed> (1 - very slow, 50 - fast)
To move the pen in down position:
D 13140,6460
To move the pen in up position:
U 13140,6460
Example of instructions that work with the machine:
:83 :32 :520,20 :E3500 P1 U0,0 :715 U 0,0 U 13424,0 U 13424,10532 U 0,10532 U 0,0 U 0,0
This draws a simple square (see the commands starting with 'U'). The P1 command does the pen select (P2 for the other pen).
Resources
Software that lists these plotters explicitly as supported:
- SignTools 4 - an add-on for CorelDraw, Demo Version available
- Some references (eBay auctions et al) list HPGL (overview) as a way to talk to it. But often together with some interface box so this might not work for ours.
This program works with the plotter:
- EuroCUT Basic 7 http://www.eurosystems.lu/index.dml?unten=software/EuroCUT_Basic-eng.htm&von=html
Software
The modified pstoedit can be found on the techinc github repo
https://github.com/techinc/ta10/
Technical Information
Plotting area double plottin head 1000 x 1210 mm
Plotting area quad plotting head 1000 x 1145 mm
MWK 977 x 1145 mm
Dimensions (W x D x H) 1580 x (1060 - 1830) x 780 mm
Weight 321 kg
Maximum speed 250 mm/s
Acceleration 2 m/s²
Resolution 0.01 mm
Addressable resolution 0.02 mm
Static repeatability ± 0.02 mm
Software-interface ASCII / binary
Basis Plotter Software (Calcomp plotting routines)
Hardware-interface RS 232C 9600 bps, 8,n,1 hardware flow control needs to be on, otherwise it will drop plotter commands.
The current cable has been hand-soldered to the following specification after it was clear someone had used a cable with borken rts/cts dsr/etc layout (inputs were listening to line-noise, outputs were talking to eachother) Note: the plotter acts as a DTE (Data Terminal Equipment); just like a PC/workstation does. Thus you need a fully wired Cross-cable
Name | DB9 | DB25 | Name |
---|---|---|---|
Receive data (RX) | 2 | 2 | Transmit Data (TX) |
Transmit data (TX) | 3 | 3 | Receive data (RX) |
Data Terminal Ready (DTR) | 4 | 6+8 | Data Set Ready (DSR) + Carrier Detect (CD) |
System Ground | 5 | 7 | System ground |
Data Set Ready (DSR) + Carrier Detect (CD) | 6+1 | 20 | Data Terminal Ready |
Request to Send (RTS) | 7 | 5 | Clear To Send (CTS) |
Clear To Send (CTS) | 8 | 4 | Ready To Send (RTS) |
|DB25
Output via a USB->Serial converter has not been successfully achieved yet but should in theory be possible.
Input-Buffer 512 Bytes
Mains connection 220V AC ± 10% optinal (100,115,125,200,235,250 VAC ±10%)50/60 Hz
Power consumption 660 VA without optional equipment
Interface
Need to look at which protocols we can use to communicate and the data format it uses to print/plot with
External Links to information
http://www.mucad.com/cmsmultilanguage/index.php?page=wild-ta-10&hl=en
http://www.mucad-sky.com/id6.html
http://www.mucad.com/cmsmultilanguage/uploads/data/verbrauchsmaterial/Wild_UWK_Englisch.pdf - external cutting heads you can buy
http://www.mucad-sky.com/sitebuildercontent/sitebuilderpictures/ta100s100bxldataspec.jpg