Difference between revisions of "SpaceAPI:Button"
Brainsmoke (talk | contribs) |
Brainsmoke (talk | contribs) |
||
| Line 21: | Line 21: | ||
(Is there a pull-up resistor connected to pin2?) | (Is there a pull-up resistor connected to pin2?) | ||
| + | |||
| + | Pin7 is used to control the led in the device. | ||
==Power== | ==Power== | ||
Revision as of 19:14, 15 May 2012
| Projects | |
|---|---|
| Participants | Brainsmoke, Guido, Realitygaps |
| Skills | nanode, arduino, basic electronics |
| Status | Active |
| Niche | Electronics |
| Purpose | Infrastructure |
Nanode code
https://github.com/guidocalvano/spaceapi
Edit IP address to 10.68.0.42,
Edit Gateway to 10.68.0.1
Wiring
When the button is pressed, pin2 will be pulled to ground.
(Is there a pull-up resistor connected to pin2?)
Pin7 is used to control the led in the device.
Power
The nanode is now powered through the USB-port on the wireless router.
DO NOT power it any other way, there are some issues with the voltage regulator (which is not used when fed through USB.
