Difference between revisions of "AnusCopter"
(Created page with "{{Project |ProjectSkills=Soldering,Electronics,Coding,UI design |ProjectStatus=Getting parts |ProjectNiche=Electronics |ProjectPurpose=Fun }} =WIP=
* 2013-11-20 put AeroQua...") |
m |
||
| Line 9: | Line 9: | ||
* 2013-11-20 put AeroQuad in case | * 2013-11-20 put AeroQuad in case | ||
* 2013-11-23 assembled body, screwed motors on with 16x M3 (~6mm) | * 2013-11-23 assembled body, screwed motors on with 16x M3 (~6mm) | ||
| − | |||
| − | |||
==Ordered== | ==Ordered== | ||
4x Turnigy Multistar 30 Amp Multi-rotor Brushless ESC | 4x Turnigy Multistar 30 Amp Multi-rotor Brushless ESC | ||
| − | Turnigy 9XR Transmitter Mode 2 + 11.1v (3s) 2200mAh 1.5C | + | Turnigy 9XR Transmitter Mode 2 + FS-TH9X-B-Module + 11.1v (3s) 2200mAh 1.5C |
Turnigy 9X 2.4GHz 8Ch Receiver (V2) | Turnigy 9X 2.4GHz 8Ch Receiver (V2) | ||
Revision as of 18:35, 23 November 2013
| Projects | |
|---|---|
| Participants | Ranzbak, The JinX |
| Skills | Soldering, Electronics, Coding, UI design |
| Status | Getting parts |
| Niche | Electronics |
| Purpose | Fun |
Contents
WIP
- 2013-11-20 put AeroQuad in case
- 2013-11-23 assembled body, screwed motors on with 16x M3 (~6mm)
Ordered
4x Turnigy Multistar 30 Amp Multi-rotor Brushless ESC
Turnigy 9XR Transmitter Mode 2 + FS-TH9X-B-Module + 11.1v (3s) 2200mAh 1.5C
Turnigy 9X 2.4GHz 8Ch Receiver (V2)
Turnigy 2200mAh 3S 35C LIPO
Turnigy 2200mAh 3S 30C LIPO
Turnigy Accucel-6 50W 6A Balancer/Charger
24x 8045 CW CCW Propeller
Components
HJ 450 "classic" frame
4x Turnigy D2822/17 1100KV Brushless
AeroQuad 32 Flight Control board v2
