ISpindel: Difference between revisions

From Technologia Incognita
Jump to navigation Jump to search
Einnor (talk | contribs)
No edit summary
Einnor (talk | contribs)
No edit summary
Line 8: Line 8:
== iSpindel ==
== iSpindel ==


iSpindel DIY continuous hydrometer, for measuring the realitive gravity / density of wort. Meant as an educational project for [https://kwbg.nl KWBG].  
iSpindel DIY continuous hydrometer, for measuring the realitive gravity / density of wort. Meant as an educational project for [https://kwbg.nl KWBG].
We created footprint for the various parts on the PCB. These can be found in the /libs dir in the repo. Furthermore we replaced the reset switch with a reed
switch so you can use a magnet to reset the iSpindel without opening the container.


Previous work:
Previous work:

Revision as of 18:40, 8 June 2022

Projects
Participants
Skills soldering, brewing, PCB Design
Status Active
Niche FoodHacks
Purpose Fun

iSpindel

iSpindel DIY continuous hydrometer, for measuring the realitive gravity / density of wort. Meant as an educational project for KWBG. We created footprint for the various parts on the PCB. These can be found in the /libs dir in the repo. Furthermore we replaced the reset switch with a reed switch so you can use a magnet to reset the iSpindel without opening the container.

Previous work:

Look also here: [github.com/techinc/ispindel_kicad]

TODO-List:

  • Cleaned PCB repo (first version: Einnor)
  • Pannelization test (Einnor)
  • Reed-switch test/rework (Einnor)
  • Footprint Battery Holder with sliding pads (Einnor)
  • Footprint D1-Mini 8-pin version (justa) Done by Einnor
  • Petling bottles order (justa) Done, 20220608. 10 pieces
  • Online-service (ubidots?) uitzoeken/selecteren (sikkepitje)
  • Order more parts (Einnor + Justa)
  • Test whole setup on a breadboard
  • setup a mailing list! 😁 (Justa) Done: beernerds@lists.techinc.nl