Pledges/Tools Bootstrap

A general list of things we need to bootstrap our space in terms of tooling. There is a separate page for electronics components.

Please add to the list below, including any prices as this will help us target which things we can afford to buy. If a tool is available in the space, please mark it in the list below as "Available in the space". If you can provide a tool, please note as "Xxx will bring to space" (and eventually as "Available" when it arrives).

Some example prices are included below (typically for Gamma, home-use quality) for reference. The tools may eventually be purchased elsewhere, of course, if better price and similar quality or better quality and similar price prevails...

Tools Pledge 1 - Basic Tools Bootstrap

This pledge is meant to cover a set of basic, mostly general-purpose, tools which are needed for many types of hardware projects.

Goal for Tools Pledge 1: ~500 euro (or equivalent in in-kind donations)

Pledges

  Peter - 50 euro
  Aldert - 50 euro
  amran - 20 euro
  stef  -  20 euro
  User:justa:arnd - 20 euro

Running Total

  160 euro

Hand Tools

• (metal) hacksaw [various 10.00-47.95euro at Gamma, perhaps 20.00euro sufficient + ~10euro for extra blades] (arnd: I have a small one to spare (15cm) and some blades; will donate)
• hand wood saw (arnd: have one extra, will bring)
• spanner set [29.95euro for 6-22mm set at Gamma]
• pliers
• small hammer (e.g. jeweler) [9euro at Gamma]
• adjustable wrenches (various sizes) [5.99-17.99euro at Gamma] - available in the space (loan from Peter)
• allen/hex wrench set [9.99euro for 1.5-10mm set at Gamma]
• wood files
• jewellers screwdriver set
• torx/non-standard screwdrivers
• c-clamps (several sizes, 2+ each)
• xacto knives [~5 euros, for example at Conrad]
• utility knife [various 5-10euro + 3-5euro for blades, Gamma]
• bench vises [59.00euro for 80mm, 77.50euro for 105mm at Gamma]
• wire cutters
• pipe cutter
• drill bit set
• wire strippers
• small brushes (various)
• needle-nose pliers (various)
• staple gun

Measurement/layout tools

• Tape Measure [various 4.99-8.99euro at Gamma]
• Vernier Calipers (digital?) [17.69euro for basic, 29.95euro for digital, Gamma] -- Antony will bring.
• Micrometer
• Spirit Level [7.99-17.95euro for 40-80cm level at Gamma]
• Thickness guage [5.29 euro at Gamma]
• Center punches
• Scriber [3.99euro at Gamma]
• Machinist squares - available in space
• Adjustable square

Power tools

• rotary tool (e.g. dremel) + tools [109.00euro for Dremel 4000 + 45 access. at Gamma, 150euro for cordless model + access.] (arnd: I have one 'dremel-clone' to spare. I own three dremel-type tools and I think 2 is enough ;) It needs a new accessory-kit , however)
• hot glue gun (there is one small one donated by webmind in his for public use box) [13-86euro at Conrad for various models plus 10euros for gluesticks, say]. Ultratux has 20-40 11mm gluesticks. Arnd has some too that he'll dig up

Misc/safety

• gloves x2 (work) [3.5-5euro/pair at Gamma] (arnd: i might have a number spare; i keep buying these things. The simple/cheap kind, cloth+leather)
• gloves x2 (rubber/latex) [2.99euro/pair at Gamma]
• safety glasses x 3 [5.99euro/pair at Gamma] (arnd: Might have some of the cheaper types; flat pane plastic + rubber rim; works but easily scratched)
• Acetone (removes adhesives) [~9.00euro at Da, 1l bottle]
• Ethyl/isopropyl alcohol (for cleaning) [~9.00euro at Da, 1l bottle]
• WD-40 (available in the space)
• light machine oil (e.g. sewing machine/bike)
• plastic funnel (arnd: am sure i have a few to spare; part of a set)
• plastic washbin/containers (for use with chemicals, not food) (arnd: have a number of trays to spare perhaps for etching as part of DOKA setup; will investigate)
• safety goggles (as opposed to glasses ?)
• flashlight

Space Infrastructure

• Trash can (separate from one used for "clean" space)
• Broom/brush/dustpan (for "dirty" use) [5-10euros at Gamma]

Tools already present in the space (donated or loaned)

Hand Tools

• hammer (standard claw) - available in space
• vice grips (various sizes?) - available in space (loan from Peter)
• standard screwdriver set (flathead/phillips) - available in space
• chisel - available in space
• metal files - some available in space [5.45euro for three large files, 9.89euro for set of 6 small files, at Gamma]
• spring clamps (several) - available in space (loan from Peter)
• Tweezers/forceps/etc - available in space
• scissors - available in space
• tap/die set - available in the space (loan from Peter)

Measurement/layout tools

• Steel rules (e.g. 30cm + 50cm) - available in the space (loan from Peter)

Power tools

• drill press - available in the space (loan from Ultratux?)
• bench grinder - available in the space (belongs to space)
• cordless drill - on loan from Ultratux
• standard (corded) power drill - available in space
• sewing machine - two available in space (donated by Vesna?)

Electronics Test and Measurement

• oscilloscope - available in space (webmind's tectronix from nato is on loan, other?)

Space Infrastructure

• Adjustable Lamp w/magnifier -2 available in the space (loan from Ultratux)

Desirable Tools (for later or dedicated pledges)

Hand Tools

• boltcutters
• sheet metal brake
• sheet metal shears
• lockpick set

Measurement/layout tools

• Infrared Thermometer
• Digital kitchen scale
• Digital microscope (USB)

Power tools

• evolution rage saw
• band saw, horizontal
• band saw, vertical
• scrollsaw
• jigsaw
• metal lathe (+ tooling!)
• metal milling machine (+ tooling!)
• air compressor

Electronics Test and Measurement

• cheap soldering irons+holders - available in space (more for workshops?)
• regulated powersupply
• workbench power supply (variable voltage) - A dedicated pledge drive is underway.
• braided desoldering wire
• Multimeters (several)
• Bus pirate?
• Logic analyzer?

Digital Fabrication

• 3D printer -Two pledge drives are underway: Prusai3 and Ultimaker
• Router/XY-CNC
• Laser cutter
• PCB etching/cutting?

Space Infrastructure

• Solid workbench (for mounting vises, using with lathe/mill/grinder, standing height, not sitting)
• Stools (tall, for "standing" bench)
• Shop Vacuum (separate from one used for "clean" space)
• Large Whiteboard
• Projector/beamer
• Cutting mats
• Big box of legos :-)
• Toolbox, rolling w/ drawers?
• Ladder

Welding/Brazing/Soldering

• 2 soldering stations on loan available

Woodworking

• TODO