Difference between revisions of "X201"
Realitygaps (talk | contribs) m (→Fingerprint Reader) |
Realitygaps (talk | contribs) m (→Fingerprint Reader) |
||
| Line 84: | Line 84: | ||
=== Fingerprint Reader === | === Fingerprint Reader === | ||
The fingerprint reader seems to work with libfprint and fprintd - http://www.freedesktop.org/wiki/Software/fprint/ | The fingerprint reader seems to work with libfprint and fprintd - http://www.freedesktop.org/wiki/Software/fprint/ | ||
| − | |||
Use fprint-enroll and fprint-verify to store and verify your fingerprint. There is also fingerprint-gui software available | Use fprint-enroll and fprint-verify to store and verify your fingerprint. There is also fingerprint-gui software available | ||
| − | |||
| Line 98: | Line 96: | ||
To the files in /etc/pam.d/ that you want to allow fingerprint authentication with (eg. sudo, login, etc) | To the files in /etc/pam.d/ that you want to allow fingerprint authentication with (eg. sudo, login, etc) | ||
| − | + | WARNING: Fingerprint verification is not very secure - http://kurtsh.com/2008/05/27/info-why-fingerprint-domain-authentication-is-a-bad-idea/ | |
| − | |||
== Windows == | == Windows == | ||
Revision as of 22:09, 17 October 2014
Data for the X201 users:
Contents
Generic
SECURITY WARNINGS
- Flash Firmware over Network is turned on by default
- Remote management in de BIOS is turned on by default
- WAN/3G is turned on by default (might connect to gsm-tower)
- Check your options in the BIOS.
- Webcam does not have a sticker yet ;)
You get into the BIOS by pressing the blue 'thinkvantage' button when you see the thinkpad bootup logo and pressing F1 at the menu.
3G/UMTS Modules
Firmware link (from archlinux aur packages):
- ftp://ftp.hp.com/pub/softpaq/sp48501-49000/sp48568.exe
- https://github.com/jolicloud/linux-firmware/raw/master/gobi/UQCN.mbn
Build():
- cabextract sp48568.exe
- cp Qualcomm/QCImages/Source/Packages/6/*.mbn /usr/lib/firmware/gobi/
- cp UQCN.mbn /usr/lib/firmware/gobi/
From (the French) Win7 Copy these 3 files into /lib/firmware/gobi
- C:\Program Files (x86)\Qualcomm\Images\Lenovo\UMTS\AMSS.mbn
- C:\Program Files (x86)\Qualcomm\Images\Lenovo\UMTS\Apps.mbn
- C:\Program Files (x86)\Qualcomm\Images\Lenovo\0\UQCN.mbn
Taken from: http://support.lenovo.com/us/en/downloads/ds001302
- https://annejan.com/media/UMTS.zip (just AMSS.mbn and Apps.mbn) note UNTESTED !!
- https://annejan.com/media/Lenovo.zip the whole set of images including different versions of AMSS.mbn, Apps.mbn and UQCN.mbn note UNTESTED !!
GPS
The Qualcomm Gobi 2000 in these laptops also supports GPS (with or without a SIM card.) However, to enable this, you will need to have a Windows install either directly or in a VM that supports USB passthrough. You'll need to install the driver as per above, and the ThinkVantage software from http://support.lenovo.com/us/en/downloads/ds015017 from which you can enable the Auto-Tracking feature that enables GPS.
After that you can:
echo "\$GPS_START" > /dev/ttyUSB2 # use GPS echo "\$GPS_STOP" > /dev/ttyUSB2
http://www.thinkwiki.org/wiki/Qualcomm_Gobi_2000
Coreboot
- http://www.sublab.org/wiki/coreboot-x201/
- http://www.coreboot.org/Board:lenovo/x201
- http://review.coreboot.org/gitweb?p=coreboot.git
Memory upgrades
According to http://www.thinkwiki.org/wiki/Unofficial_maximum_memory_specs it might not be possible to upgrade the RAM further than 4GB.
Tested configuration was 2x 4GB: Corsair 1333MHz 9-9-9-24 1.5v (CMSO4GX3M1A1333C9) on ThinkPad X201 3680-PBG with ID 6QET70WW, BIOS version 1.40 and Embedded Controller version 1.15. I have not checked my model/BIOS yet, but JFYI.
Tested the ICIDU Memory from x200s, 2x 4GB: works.
phicoh got 2x Crucial 4 GB DDR3-1600 (CT51264BF160B) from Alternate
r3boot tried 2 x Corsair 4GB PC3-10600 (CMSO8GX3M2A1333C9) and they do NOT work (the laptops initializes all leds and the thinklight flashes quick, but then it hangs)
Tweaks
Some tweaks to make the x201 experience a more pleasurable one.
Blinky Wifi LED of blinking
Seems the wifi LED will blink any time data is transmitted. The location of the wifi LED makes this less than desirable.
From: https://alexcabal.com/stop-blinking-intel-wifi-led-on-ubuntu-karmic/
This works:
echo "echo \"options iwlcore led_mode=1\" >> /etc/modprobe.d/wlan.conf" | sudo bash
Powersave
Powertop suggested a bunch of tweaks, listed at https://gist.github.com/realitygaps/c7d5493b10becd1de873
Synaptics config
A synaptics config that seems to work well with the touchpad - https://gist.github.com/realitygaps/2e73de7383a7d4fb1e82
Fingerprint Reader
The fingerprint reader seems to work with libfprint and fprintd - http://www.freedesktop.org/wiki/Software/fprint/
Use fprint-enroll and fprint-verify to store and verify your fingerprint. There is also fingerprint-gui software available
To authenticate by fingerprint with pam add:
auth sufficient pam_fingerprint-gui.so
To the files in /etc/pam.d/ that you want to allow fingerprint authentication with (eg. sudo, login, etc)
WARNING: Fingerprint verification is not very secure - http://kurtsh.com/2008/05/27/info-why-fingerprint-domain-authentication-is-a-bad-idea/
Windows
If installing via an usb drive is failing, you can try a pxe install, following this tutorial: http://s205blog.wordpress.com/2012/09/29/windows-7-pxe-network-install-turorial/
US keyboard
http://www.ebay.com/itm/like/201115764449 $17.59 (€14,48), free shipping
UltraBase Docking Station
http://www.ebay.nl/itm/Lenovo-ThinkPad-UltraBase-Docking-Station-X200-X201-42x4963/141416234744
We could fit these (3 of them) in the one box, for £10 (shipping).
Who would like to order one (if we hit 3 this might be good option) ?
- JinX
- phicoh
- ArdaXi
Oops .. they only have 2 left . .
