Difference between revisions of "X201"

From Technologia Incognita
Jump to: navigation, search
m
m (Fingerprint Reader)
Line 84: Line 84:
 
=== Fingerprint Reader ===
 
=== Fingerprint Reader ===
 
The fingerprint reader seems to work with libfprint and  fprintd  - http://www.freedesktop.org/wiki/Software/fprint/
 
The fingerprint reader seems to work with libfprint and  fprintd  - http://www.freedesktop.org/wiki/Software/fprint/
 +
 +
 
Use fprint-enroll and fprint-verify to store and verify your fingerprint. There is also fingerprint-gui software available
 
Use fprint-enroll and fprint-verify to store and verify your fingerprint. There is also fingerprint-gui software available
 +
 +
  
 
To authenticate by fingerprint with pam add:
 
To authenticate by fingerprint with pam add:
 +
  
 
auth      sufficient  pam_fingerprint-gui.so
 
auth      sufficient  pam_fingerprint-gui.so
 +
  
 
To the files in /etc/pam.d/ that you want to allow fingerprint authentication with (eg. sudo, login, etc)
 
To the files in /etc/pam.d/ that you want to allow fingerprint authentication with (eg. sudo, login, etc)
 +
 +
 
Warning: Fingerprint verification is not very secure - http://kurtsh.com/2008/05/27/info-why-fingerprint-domain-authentication-is-a-bad-idea/
 
Warning: Fingerprint verification is not very secure - http://kurtsh.com/2008/05/27/info-why-fingerprint-domain-authentication-is-a-bad-idea/
  

Revision as of 22:08, 17 October 2014

Data for the X201 users:

Generic

SECURITY WARNINGS

  • Flash Firmware over Network is turned on by default
  • Remote management in de BIOS is turned on by default
  • WAN/3G is turned on by default (might connect to gsm-tower)
  • Check your options in the BIOS.
  • Webcam does not have a sticker yet ;)

You get into the BIOS by pressing the blue 'thinkvantage' button when you see the thinkpad bootup logo and pressing F1 at the menu.

3G/UMTS Modules

Firmware link (from archlinux aur packages):

Build():

  • cabextract sp48568.exe
  • cp Qualcomm/QCImages/Source/Packages/6/*.mbn /usr/lib/firmware/gobi/
  • cp UQCN.mbn /usr/lib/firmware/gobi/

From (the French) Win7 Copy these 3 files into /lib/firmware/gobi

  • C:\Program Files (x86)\Qualcomm\Images\Lenovo\UMTS\AMSS.mbn
  • C:\Program Files (x86)\Qualcomm\Images\Lenovo\UMTS\Apps.mbn
  • C:\Program Files (x86)\Qualcomm\Images\Lenovo\0\UQCN.mbn

Taken from: http://support.lenovo.com/us/en/downloads/ds001302

GPS

The Qualcomm Gobi 2000 in these laptops also supports GPS (with or without a SIM card.) However, to enable this, you will need to have a Windows install either directly or in a VM that supports USB passthrough. You'll need to install the driver as per above, and the ThinkVantage software from http://support.lenovo.com/us/en/downloads/ds015017 from which you can enable the Auto-Tracking feature that enables GPS.

After that you can:

echo "\$GPS_START" > /dev/ttyUSB2
# use GPS
echo "\$GPS_STOP"  > /dev/ttyUSB2

http://www.thinkwiki.org/wiki/Qualcomm_Gobi_2000

Coreboot

Memory upgrades

According to http://www.thinkwiki.org/wiki/Unofficial_maximum_memory_specs it might not be possible to upgrade the RAM further than 4GB.

Tested configuration was 2x 4GB: Corsair 1333MHz 9-9-9-24 1.5v (CMSO4GX3M1A1333C9) on ThinkPad X201 3680-PBG with ID 6QET70WW, BIOS version 1.40 and Embedded Controller version 1.15. I have not checked my model/BIOS yet, but JFYI.

Tested the ICIDU Memory from x200s, 2x 4GB: works.

phicoh got 2x Crucial 4 GB DDR3-1600 (CT51264BF160B) from Alternate

r3boot tried 2 x Corsair 4GB PC3-10600 (CMSO8GX3M2A1333C9) and they do NOT work (the laptops initializes all leds and the thinklight flashes quick, but then it hangs)

Tweaks

Some tweaks to make the x201 experience a more pleasurable one.

Blinky Wifi LED of blinking

Seems the wifi LED will blink any time data is transmitted. The location of the wifi LED makes this less than desirable.

From: https://alexcabal.com/stop-blinking-intel-wifi-led-on-ubuntu-karmic/

This works:

echo "echo \"options iwlcore led_mode=1\" >> /etc/modprobe.d/wlan.conf" | sudo bash

Powersave

Powertop suggested a bunch of tweaks, listed at https://gist.github.com/realitygaps/c7d5493b10becd1de873

Synaptics config

A synaptics config that seems to work well with the touchpad - https://gist.github.com/realitygaps/2e73de7383a7d4fb1e82

Fingerprint Reader

The fingerprint reader seems to work with libfprint and fprintd - http://www.freedesktop.org/wiki/Software/fprint/


Use fprint-enroll and fprint-verify to store and verify your fingerprint. There is also fingerprint-gui software available


To authenticate by fingerprint with pam add:


auth sufficient pam_fingerprint-gui.so


To the files in /etc/pam.d/ that you want to allow fingerprint authentication with (eg. sudo, login, etc)


Warning: Fingerprint verification is not very secure - http://kurtsh.com/2008/05/27/info-why-fingerprint-domain-authentication-is-a-bad-idea/

Windows

If installing via an usb drive is failing, you can try a pxe install, following this tutorial: http://s205blog.wordpress.com/2012/09/29/windows-7-pxe-network-install-turorial/

US keyboard

http://www.ebay.com/itm/like/201115764449 $17.59 (€14,48), free shipping

UltraBase Docking Station

http://www.ebay.nl/itm/Lenovo-ThinkPad-UltraBase-Docking-Station-X200-X201-42x4963/141416234744

We could fit these (3 of them) in the one box, for £10 (shipping).

Who would like to order one (if we hit 3 this might be good option) ?

  • JinX
  • phicoh
  • ArdaXi

Oops .. they only have 2 left . .