https://wiki.techinc.nl/api.php?action=feedcontributions&user=Peter&feedformat=atomTechnologia Incognita - User contributions [en]2024-03-28T23:34:52ZUser contributionsMediaWiki 1.30.0https://wiki.techinc.nl/index.php?title=Pledges/Build_material_paint_etc_for_new_room&diff=11021Pledges/Build material paint etc for new room2014-02-18T12:42:36Z<p>Peter: </p>
<hr />
<div>{{Pledge<br />
|Specification=make new room ready<br />
|Pledge Type=Infrastructure<br />
|Pledge Leader=User:Narya<br />
|Approximate Target=150<br />
|Running Total=70<br />
|Status=Current<br />
}}<br />
__NOTOC__ __NOEDITSECTION__<br />
<br />
We need to buy material to make the new room ready for use. E.g. wood, paint, wiring, etc. With this pledge we want to get stuff at the bouwmarkt and get started.<br />
<br />
==Shopping list cq to borrow cq get from donations==<br />
* Wood and other material for door-opening: 83.95 (see mail)<br />
* [http://www.praxis.nl/verf-laminaat-decoratie/verf/muurverf-latex/latex/sencys-latex-superdekkend-muur-plafond-mat-ral-9010-2-5l/5239127.html Latex] - 14 for 2.5L, or perhaps something cheaper<br />
* Brush - ~5 euro's<br />
* Roller - ~5 euro's<br />
* Stick - might have one of these at home (narya), otherwise 10 euro's<br />
* [http://www.praxis.nl/bouwmaterialen/bouwstoffen/vulmiddelen/muurvullers/alabastine-grote-gatenvuller-poeder-1kg/3403084.html Alabastine grote gaten vuller] - 13 euro<br />
* ...<br />
<br />
==Pledges==<br />
* €20 -- Narya<br />
* €10 -- Stef<br />
* €10 -- Mariejel<br />
* €10 -- phicoh<br />
* €20 -- Peter<br />
* €0 -- Signor Moneybags</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Build_material_paint_etc_for_new_room&diff=11020Pledges/Build material paint etc for new room2014-02-18T12:42:00Z<p>Peter: </p>
<hr />
<div>{{Pledge<br />
|Specification=make new room ready<br />
|Pledge Type=Infrastructure<br />
|Pledge Leader=User:Narya<br />
|Approximate Target=150<br />
|Running Total=50<br />
|Status=Current<br />
}}<br />
__NOTOC__ __NOEDITSECTION__<br />
<br />
We need to buy material to make the new room ready for use. E.g. wood, paint, wiring, etc. With this pledge we want to get stuff at the bouwmarkt and get started.<br />
<br />
==Shopping list cq to borrow cq get from donations==<br />
* Wood and other material for door-opening: 83.95 (see mail)<br />
* [http://www.praxis.nl/verf-laminaat-decoratie/verf/muurverf-latex/latex/sencys-latex-superdekkend-muur-plafond-mat-ral-9010-2-5l/5239127.html Latex] - 14 for 2.5L, or perhaps something cheaper<br />
* Brush - ~5 euro's<br />
* Roller - ~5 euro's<br />
* Stick - might have one of these at home (narya), otherwise 10 euro's<br />
* [http://www.praxis.nl/bouwmaterialen/bouwstoffen/vulmiddelen/muurvullers/alabastine-grote-gatenvuller-poeder-1kg/3403084.html Alabastine grote gaten vuller] - 13 euro<br />
* ...<br />
<br />
==Pledges==<br />
* €20 -- Narya<br />
* €10 -- Stef<br />
* €10 -- Mariejel<br />
* €10 -- phicoh<br />
* €20 -- Peter<br />
* €0 -- Signor Moneybags</div>Peterhttps://wiki.techinc.nl/index.php?title=KidsWorkshopFeb2014&diff=10969KidsWorkshopFeb20142014-02-15T19:21:46Z<p>Peter: </p>
<hr />
<div>{{Event<br />
|Date=2014/02/16<br />
|Location=(h)ACTA<br />
|EventType=Workshop<br />
|Contact=Becha,<br />
}}<br />
Kids in Space!<br />
<br />
Hacking Workshop for Children<br />
<br />
=Details=<br />
<br />
When: 12:00 Noon<br />
<br />
Where: (h)ACTA, Louwesweg 1 (across the street from Slotervaart hospital) <br />
<br />
Who: you and your children! Open to non-members! Ages 6-16 recommended, younger and older also welcome! <br />
<br />
What: basic electronics, making kites, 3D printing, T-shirts hacking...<br />
<br />
$$$: entrance & workshops are for free, materials cost small amounts of money, and expected donation for food is 5 Euro per child (pizza, fruit juice, cookies)<br />
<br />
= Schedule and activities=<br />
{{DISPLAYTITLE:<span style="display:none"></span>}}<br />
<br />
{| border="2" cellspacing="0" cellpadding="4" rules="all" style="clear:right; width:750px; margin:5px 0 1em 1em; border:solid 1px; border-collapse:collapse; background-color:#F9F9F9; font-size:95%; empty-cells:hide" class="wikitable"<br />
|- <br />
| <b>Area</b><br />
| <b>TIME </b><br />
| <b>ACTIVITY</B><br />
| Age group, Number of kids<br />
| Who is the instructor <br />
|-<br />
|- <br />
| All areas<br />
| 12:00 - 12:30<br />
| Introductions, name stickers, choosing activity<br />
| ALL kids<br />
| all instructors<br />
|-<br />
| Small table<br />
| 12:30 - 13:00 <br />
| LED throwies (with sticky tape) <br />
| Up to 6 years ; Group of 4 kids<br />
| Instructor: Vesna<br />
|- <br />
| Electronics table<br />
| 12:30 - 13:00 <br />
| Bristle bots (soldering) <br />
| 6-10 years, Group of 4 kids<br />
| Instructor: Arnd <br />
|-<br />
| 3D-printers<br />
| 12:30 - 13:00 <br />
| Designing 3D printed "thing"<br />
| 6-10 years; 2 kids only!<br />
| Instructor: ? <br />
|-<br />
| Big table<br />
| 12:30 - 13:00 <br />
| T-shirts hacking<br />
| 5-12 years ; Group of 4 kids<br />
| Instructor: Nana<br />
|- <br />
| 3D-printers<br />
| 13:00 - 13:30 <br />
| Designing 3D printed "thing"<br />
| 6-10 years; 2 kids only!<br />
| Instructor: ? <br />
|- <br />
| (new room?)<br />
| 12:30 - 13:15 <br />
| KITE painting/coloring<br />
| 4-8 years : Group of 4 kids<br />
| Chotee<br />
|-<br />
| Big table<br />
| 13:30 - 14:00 <br />
| T-shirts hacking<br />
| 5-12 years ; Group of 4 kids<br />
| Instructor: Nana<br />
|- <br />
| (new room?)<br />
| 12:30 - 15:30 <br />
| KITESkitesKITES<br />
| 8-16 years<br />
| Instructor? <br />
|-<br />
| Small table<br />
| 13:30 - 14:00 <br />
| LED throwies (with sticky tape) <br />
| Up to 8 years ; Group of 4 kids<br />
| Instructor: Vesna<br />
|- <br />
| Electronics table<br />
| 13:30 - 14:30 <br />
| Bristle bots or other soldering kits (soldering) <br />
| 6-10 years, Group of 4 kids<br />
| Instructor: Arnd (and Charlie) <br />
|-<br />
| 3D-printers<br />
| 13:30 - 14:00 <br />
| Designing 3D printed "thing"<br />
| 6-10 years; 2 kids only!<br />
| Instructor: ? <br />
|- <br />
| <b>BREAK</b><br />
| 14:00 - 15:00<br />
| FOOD: pizza? cupcakes? waffles? <br />
| ALL kids<br />
| all instructors<br />
|-<br />
| 3D-printers<br />
| 13:00 - 15:00<br />
| (printing)<br />
| (no kids ;-) <br />
| Instructor: ? <br />
|-<br />
|<br />
| (after-break sessions?)<br />
|<br />
|<br />
|-<br />
|}<br />
<br />
=Kits=<br />
<br />
* LED throwie: 2 Euro; no soldering required. Any age or skill. Takes about 15 minutes <br />
* Bristle bot: 3 Euro, bring your own toothbrush. Takes about 30 minutes to make. Soldering required: can be done by child if wanted or by attendee.<br />
* Soldering kit: 'rainbow' or 'color circle', 5 euro. For ages 6 and up. Requires soldering; comes with easy-to-follow guide. Takes about 1 hour to put together. Soldering guidance and instruction provided.<br />
<br />
* Kite: 3 Euro for a small one, not sure about the big ones<br />
* T-shirt decoratinos : 1 Euro (bring your own T-shirt!)<br />
<br />
=Who is taking part=<br />
<br />
* Becha (Alisa 10 years, Charlie 8 years) + maybe 2-3 kids from Charlie's class<br />
* Etienne (Meta 10, Roald 8)<br />
* MrSeeker (Huijbert 8, George 7)<br />
* AndreasR (Vincent 6, Kaya 4, possibly: David 7)<br />
* Chotee <br />
* Nana (+ Iris 7, Lara 4) <br />
* Mariejel (probably bringing two 8 year olds and 1 adult)<br />
* Arnd<br />
* BigMac (+ Erin, 15) <br />
* Peter (+ Nicolas, 6)<br />
* (maybe) Marija ( + 4.5 old daughter)<br />
* (maybe) Agoston ( +6 old son)<br />
* (maybe) Olivia (+ FOUR children!) <br />
<br />
=Dutch Version=<br />
<br />
Can someone translate ? <br />
<br />
http://wiki.techinc.nl/index.php/KidsWorkshopFeb2014_Dutch <br />
<br />
<br />
=Flyers=<br />
<br />
Becha - v2 - PDF - -http://becha.home.xs4all.nl/kids-in-space-2.pdf</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=5393Tinkering Evenings2013-03-06T20:02:43Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb - [[Sewing_workshop]] on 19 or 21 Feb<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
* Week of 11 Mar - 15 Mar?<br />
* Week of 18 Mar - 22 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter, Turiphro<br />
<br />
* Bringing the [[Pledges/Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter, Turiphro<br />
<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* PCB lighting (BeNeLux [[SpaceAPI:Map/Benelux|Hackerspaces map]] made from scrap PCBs)<br />
** Willing to lead session: [[User:Dreamer|Dreamer]]<br />
** Interested: [[User:The_JinX|the_JinX]]<br />
<br />
* Planning a [[Techinc_soldering_kit|TechInc soldering kit]] for future workshops<br />
** Willing to lead session: [[User:The_JinX|the_JinX]] (if [[User:Brainsmoke|Brainsmoke]] is not available)<br />
** Interested:<br />
<br />
* Bringing the UV etching box to working order (and eventual tutorial on its use)<br />
** Willing to lead session:<br />
** Interested: Peter, Turiphro</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4590Tinkering Evenings2013-01-28T11:53:52Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[Pledges/Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* PCB lighting (BeNeLux [[SpaceAPI:Map/Benelux|Hackerspaces map]] made from scrap PCBs)<br />
** Willing to lead session: [[User:Dreamer|Dreamer]]<br />
** Interested: [[User:The_JinX|the_JinX]]<br />
<br />
* Planning a [[Techinc_soldering_kit|TechInc soldering kit]] for future workshops<br />
** Willing to lead session: [[User:The_JinX|the_JinX]] (if [[User:Brainsmoke|Brainsmoke]] is not available)<br />
** Interested:<br />
<br />
* Bringing the UV etching box to working order (and eventual tutorial on its use)<br />
** Willing to lead session:<br />
** Interested: Peter</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4583Tinkering Evenings2013-01-28T10:51:33Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[Pledges/Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* PCB lighting (Erik, what was this one? Perhaps the UV PCB etching?)<br />
** Willing to lead session:<br />
** Interested:<br />
<br />
* Planning a [[Techinc_soldering_kit|TechInc soldering kit]] for future workshops<br />
** Willing to lead session:<br />
** Interested:</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4582Tinkering Evenings2013-01-28T10:51:09Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[Pledges/Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* PCB lighting (Erik, what was this one? Perhaps the UV PCB etching?)<br />
** Willing to lead session:<br />
** Interested:<br />
<br />
* Planning a [[TechInc_soldering_kit|TechInc soldering kit]] for future workshops<br />
** Willing to lead session:<br />
** Interested:</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4581Tinkering Evenings2013-01-28T10:50:28Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[Pledges/Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* PCB lighting (Erik, what was this one? Perhaps the UV PCB etching?)<br />
** Willing to lead session:<br />
** Interested:<br />
<br />
* Planning a [[TechInc Soldering Kit|Techinc soldering kit]] for future workshops<br />
** Willing to lead session:<br />
** Interested:</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4580Tinkering Evenings2013-01-28T10:49:11Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[Pledges/Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* PCB lighting (Erik, what was this one? Perhaps the UV PCB etching?)<br />
** Willing to lead session:<br />
** Interested:<br />
<br />
* Planning a [[TechInc Soldering Kit|Techinc_soldering_kit]] for future workshops<br />
** Willing to lead session:<br />
** Interested:</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Thursdays&diff=4579Tinkering Thursdays2013-01-28T10:48:22Z<p>Peter: </p>
<hr />
<div><br />
<br />
Please see [[Tinkering_Evenings]] wiki page. (We decided for now not to fix it to a particular day of the week.)</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4578Tinkering Evenings2013-01-28T10:46:36Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
* PCB lighting (Erik, what was this one? Perhaps the UV PCB etching?)<br />
** Willing to lead session:<br />
** Interested:<br />
<br />
* Planning a [[TechInc Soldering Kit|Techinc_soldering_kit]] for future workshops<br />
** Willing to lead session:<br />
** Interested:</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4577Tinkering Evenings2013-01-28T10:44:27Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
** Interested:<br />
* Bringing the [[Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
* PCB lighting (Erik, what was this one? Perhaps the UV PCB etching?)<br />
** Willing to lead session:<br />
** Interested:<br />
* Planning a [[TechInc Soldering Kit|Techinc_soldering_kit]] for future workshops<br />
** Willing to lead session:<br />
** Interested:</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4576Tinkering Evenings2013-01-28T10:39:45Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
** Interested:<br />
* Bringing the [[Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
* PCB lighting<br />
** Willing to lead session:<br />
** Interested:<br />
* Planning a [[TechInc Soldering Kit|Techinc_soldering_kit]] for future workshops<br />
** Willing to lead session:<br />
** Interested:</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4575Tinkering Evenings2013-01-28T10:38:35Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
** Interested:<br />
* Bringing the [[Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
* PCB lighting<br />
** Willing to lead session:<br />
** Interested<br />
* [[Techinc_soldering_kit]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4574Tinkering Evenings2013-01-28T10:36:54Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Interested: Peter<br />
* PCB lighting<br />
** Interested:<br />
* Bringing the [[Prusai3|3D Printer]] to working order<br />
** Willing to lead session:<br />
** Interested: Peter<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
== Other ideas ==<br />
<br />
http://wiki.techinc.nl/index.php/Techinc_soldering_kit</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4573Tinkering Evenings2013-01-28T10:36:15Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Interested: Peter<br />
* PCB lighting<br />
** Interested:<br />
* Bringing the [[Prusai3|3D Printer]] to working order<br />
* Bringing the [[ShapeokoCNC]] to working order<br />
** Willing to lead session: Peter<br />
** Interested:<br />
* Repairing the [[ElectricKiln]]<br />
** Willing to lead session:<br />
** Interested: Peter<br />
<br />
== Other ideas ==<br />
<br />
http://wiki.techinc.nl/index.php/Techinc_soldering_kit<br />
http://wiki.techinc.nl/index.php/Wild_TA-10</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4572Tinkering Evenings2013-01-28T10:33:58Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - first session scheduled on 31 Jan, 2013<br />
** Interested: Peter<br />
* PCB lighting<br />
** Interested:<br />
* Bringing the [[Prusai3|3D Printer]] to working order<br />
* Shapeoko CNC<br />
* ...<br />
<br />
== Other ideas ==<br />
<br />
http://wiki.techinc.nl/index.php/Techinc_soldering_kit<br />
http://wiki.techinc.nl/index.php/Wild_TA-10</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4571Tinkering Evenings2013-01-28T10:32:44Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Wild_TA-10|Vinyl Cutting Plotter]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Wild_TA-10|Vinyl Cutting Plotter]]] to working order - now scheduled for <br />
* PCB lighting<br />
* Bringing the 3D Printer<br />
* Shapeoko CNC<br />
* ...<br />
<br />
== Other ideas ==<br />
<br />
http://wiki.techinc.nl/index.php/Techinc_soldering_kit<br />
http://wiki.techinc.nl/index.php/Wild_TA-10</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4570Tinkering Evenings2013-01-28T10:31:48Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more experts and hands-on work by others new to the topic<br />
* etc.<br />
<br />
Basically anything that involves improving and/or sharing information about tools/techniques among ourselves, with an<br />
emphasis on hands-on work. (A number of the ad-hoc workshops and OOH events effectively fall into this <br />
category, so mostly what we are trying to do here is organizing a more regular cadence of such events...)<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-) - Bring the [[Vinyl Cutting Plotter|Wild_TA-10]] closer to working order<br />
* Week of 4-8 Feb?<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
* Week of 18-22 Feb?<br />
* Week of 25 Feb - 1 Mar?<br />
* Week of 4 Mar - 8 Mar?<br />
<br />
== Possible future topics ==<br />
<br />
* Bringing the [[Vinyl Cutting Plotter|Wild_TA-10]] to working order - now scheduled for <br />
* PCB lighting<br />
* Bringing the 3D Printer<br />
* Shapeoko CNC<br />
* ...<br />
<br />
== Other ideas ==<br />
<br />
http://wiki.techinc.nl/index.php/Techinc_soldering_kit<br />
http://wiki.techinc.nl/index.php/Wild_TA-10</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4569Tinkering Evenings2013-01-28T10:24:49Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more<br />
experts and hands-on work by others new to the topic<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-)<br />
<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [[Wonderful Wiki Workshop]]<br />
<br />
<br />
<br />
== Tools to get in order ==<br />
<br />
* Vinyl cutter/plotter<br />
* PCB lighting<br />
* 3D Printer<br />
* Shapeoko CNC<br />
* ...<br />
<br />
== Other ideas ==<br />
<br />
http://wiki.techinc.nl/index.php/Techinc_soldering_kit<br />
http://wiki.techinc.nl/index.php/Wild_TA-10</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4568Tinkering Evenings2013-01-28T10:24:34Z<p>Peter: </p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing), skill, piece of software, etc. by one or more<br />
experts and hands-on work by others new to the topic<br />
<br />
The hope here is that we can begin to organize regularly such "Tinkering Evenings" separate from the Wednesday<br />
social evening. For the moment we are not going to pick a specific evening during the week (both<br />
Tuesday and Thursday were proposed, but neither worked perfectly for a subset of people polled), but<br />
instead simply choose as best we can from week to week.<br />
<br />
== Near term "Tinkering Evening" schedule ==<br />
(This information should migrate to the "Events" calendar once the rhythm is eastablished.)<br />
<br />
* Thursday, 31 Jan, 2013 (18:00-)<br />
<br />
* Thursday, 14 Feb, 2013 (19:30-23:00) - [Wonderful Wiki Workshop]<br />
<br />
<br />
<br />
== Tools to get in order ==<br />
<br />
* Vinyl cutter/plotter<br />
* PCB lighting<br />
* 3D Printer<br />
* Shapeoko CNC<br />
* ...<br />
<br />
== Other ideas ==<br />
<br />
http://wiki.techinc.nl/index.php/Techinc_soldering_kit<br />
http://wiki.techinc.nl/index.php/Wild_TA-10</div>Peterhttps://wiki.techinc.nl/index.php?title=Tinkering_Evenings&diff=4567Tinkering Evenings2013-01-28T10:14:01Z<p>Peter: Created page with "We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and focus on specific things like: * Introduction to a tool in the..."</p>
<hr />
<div>We would like to start organizing a semi-regular series of "Tinkering Evenings", where we could get together and<br />
focus on specific things like:<br />
* Introduction to a tool in the space (by some expert) and hands-on work by others new to the tool<br />
* Bringing a non-functional tool in the space to working order <br />
* Introduction to some technique (e.g. locksmithing)<br />
<br />
Pick a tool to be fixed, or something to be built, or a skill to be tought and dedicate a Tuesday evening to it.<br />
<br />
== Tools to get in order ==<br />
<br />
* Vinyl cutter/plotter<br />
* PCB lighting<br />
* 3D Printer<br />
* Shapeoko CNC<br />
* ...<br />
<br />
== Other ideas ==<br />
<br />
http://wiki.techinc.nl/index.php/Techinc_soldering_kit<br />
http://wiki.techinc.nl/index.php/Wild_TA-10</div>Peterhttps://wiki.techinc.nl/index.php?title=File:Shapeoko_light_cnc.jpg&diff=3759File:Shapeoko light cnc.jpg2012-12-19T09:15:47Z<p>Peter: </p>
<hr />
<div></div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Make_zine_subscription&diff=3735Pledges/Make zine subscription2012-12-16T19:40:57Z<p>Peter: </p>
<hr />
<div>{{Pledge<br />
|Specification=Makezine subscription<br />
|Pledge Leader=User:Webmind<br />
|Approximate Target=60<br />
|Running Total=30<br />
|Status=Future<br />
}}<br />
__NOTOC__ __NOEDITSECTION__<br />
<br />
''We are looking at purchasing a makezine subscription for the space''<br />
<br />
==The item==<br />
* makezine.org<br />
* quarterly magazine on making stuff<br />
<br />
===Budget estimation===<br />
* subscription<br />
* 60 usd<br />
<br />
===Specification===<br />
* it's an ink on processed wood medium conversing information regarding the production of items by means capable of individuals as opposed to larger corporations<br />
<br />
===Additional information===<br />
* it's pretty cool<br />
<br />
==Pledges==<br />
* €10,- [[User:cmpxchg|cmpxchg]]<br />
* €10,- [[User:webmind|webmind]]<br />
* €5,- [[User:Dreamer|dreamer]]<br />
* €5,- aldert</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Stickers_for_29c3&diff=3594Pledges/Stickers for 29c32012-12-06T13:24:16Z<p>Peter: </p>
<hr />
<div>{{Pledge<br />
|Specification=Its sticky. It sticks<br />
|Pledge Type=Promotion<br />
|Pledge Leader=Amx109<br />
|Approximate Target=85<br />
|Running Total=45<br />
|Status=Current<br />
}}<br />
__NOTOC__ __NOEDITSECTION__<br />
<br />
''We are looking at purchasing stickers for promotion at 29c3''<br />
<br />
==The item==<br />
* Circular. Non laminated, 'shiny' transparent stickers. 100 stickers from [http://www.drsticker.nl/ www.drsticker.nl]<br />
<br />
===Budget estimation===<br />
* 32 EUR setup cost<br />
* 53 EUR for 7cm (diameter) for 100 stickers<br />
<br />
===Specification===<br />
* make your laptop look even more sticker-abused<br />
<br />
===Additional information===<br />
* we all love stickers<br />
* if we get more than the pledge amount, we can always buy more stickers<br />
<br />
==Pledges==<br />
* €20 -- [[User:The_JinX|the_JinX]]<br />
* €15 -- [[Narya]]<br />
* €10 -- [[User:Peter|Peter]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Stickers_for_29c3&diff=3593Pledges/Stickers for 29c32012-12-06T13:23:51Z<p>Peter: </p>
<hr />
<div>{{Pledge<br />
|Specification=Its sticky. It sticks<br />
|Pledge Type=Promotion<br />
|Pledge Leader=Amx109<br />
|Approximate Target=85<br />
|Running Total=45<br />
|Status=Current<br />
}}<br />
__NOTOC__ __NOEDITSECTION__<br />
<br />
''We are looking at purchasing stickers for promotion at 29c3''<br />
<br />
==The item==<br />
* Circular. Non laminated, 'shiny' transparent stickers. 100 stickers from [http://www.drsticker.nl/ www.drsticker.nl]<br />
<br />
===Budget estimation===<br />
* 32 EUR setup cost<br />
* 53 EUR for 7cm (diameter) for 100 stickers<br />
<br />
===Specification===<br />
* make your laptop look even more sticker-abused<br />
<br />
===Additional information===<br />
* we all love stickers<br />
* if we get more than the pledge amount, we can always buy more stickers<br />
<br />
==Pledges==<br />
* €20 -- [[User:The_JinX|the_JinX]]<br />
* €15 -- [[Narya]]<br />
* €10 -- [[User:Peter]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Air_Water_infra&diff=3250Pledges/Air Water infra2012-11-21T19:31:19Z<p>Peter: </p>
<hr />
<div>{{Pledge<br />
|Specification=Air and water space infrastructure<br />
|Pledge Type=Infrastructure<br />
|Pledge Leader=User:Ultratux<br />
|Approximate Target=750<br />
|Running Total=60<br />
|Status=Current<br />
}}<br />
__NOTOC__ __NOEDITSECTION__<br />
<br />
''We are looking at purchasing building materials for the space''<br />
<br />
==The item==<br />
* Please see email of ultratux dated 14-11-2012 16:55 for specification<br />
<br />
===Budget estimation===<br />
* Please see email of ultratux dated 14-11-2012 16:55 for specification<br />
* totals 740/750 euros<br />
<br />
===Specification===<br />
* Provides air conditioning, air suction at multiple spots thoughout the space, freshwater and drain.<br />
* Note: not including a kitchen nor sink for the cleanroom.<br />
* For more transparency, this is the list of already-ordered stuff which in the email is referenced as "260 Already ordered":<br />
<br />
Amount Description partno. piece<br />
10 x Spiraliet BS016 beugel 160mm-M8 1009835 € 3,49 € 34,90<br />
2 x Spiraliet SVH016 verbindingsstuk voor hulpstuk 160mm 1009849 € 2,81 € 5,62<br />
2 x Spiraliet SV016 verbindingsstuk voor buis 160mm 1009842 € 2,81 € 5,62<br />
2 x Spiraliet RT9016 T-stuk 160mm 90º 1009859 € 21,18 € 42,36<br />
1 x Spiraliet FLEX016A111 Alu flex slang 160mm 10 mtr. 1009901 € 89,40 € 89,40<br />
1 x Airfan Ductape 50mm rol a 50mtr. 1009908 € 9,68 € 9,68<br />
5 x PVC bocht 45 graden grijs 40mm 1xmof 1004312 € 0,66 € 3,30<br />
5 x PVC bocht 45 graden grijs 40mm 2xmof 1004313 € 0,66 € 3,30<br />
4 x PVC sok 40mm 1004338 € 0,63 € 2,52<br />
2 x PVC sifon 40mm S/P lijm 1004524 € 4,30 € 8,60<br />
2 x PVC T-stuk 45 graden grijs 40mm 3xmof 1004357 € 1,72 € 3,44<br />
20 x PVC zadel grijs 40mm 1004535 € 0,50 € 10,00<br />
10 x PVC beugel grijs 40mm type B G 1004538 € 0,99 € 9,90<br />
3 x PVC buis grijs 40x3,0mm a 4 mtr. 1004302 € 9,66 € 28,98<br />
Totaal (excl): € 212,91<br />
BTW 21%: € 44,71<br />
Totaal bedrag (incl): € 257,62<br />
<br />
==Pledges==<br />
* €10 -- [[User:Dreamer|dreamer]]<br />
* €25 -- [[User:Wizzup|Wizzup]]<br />
* €25 -- [[User:Peter|Peter]]<br />
* €.. -- ...</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Air_Water_infra&diff=3249Pledges/Air Water infra2012-11-21T19:30:45Z<p>Peter: </p>
<hr />
<div>{{Pledge<br />
|Specification=Air and water space infrastructure<br />
|Pledge Type=Infrastructure<br />
|Pledge Leader=User:Ultratux<br />
|Approximate Target=750<br />
|Running Total=35<br />
|Status=Current<br />
}}<br />
__NOTOC__ __NOEDITSECTION__<br />
<br />
''We are looking at purchasing building materials for the space''<br />
<br />
==The item==<br />
* Please see email of ultratux dated 14-11-2012 16:55 for specification<br />
<br />
===Budget estimation===<br />
* Please see email of ultratux dated 14-11-2012 16:55 for specification<br />
* totals 740/750 euros<br />
<br />
===Specification===<br />
* Provides air conditioning, air suction at multiple spots thoughout the space, freshwater and drain.<br />
* Note: not including a kitchen nor sink for the cleanroom.<br />
* For more transparency, this is the list of already-ordered stuff which in the email is referenced as "260 Already ordered":<br />
<br />
Amount Description partno. piece<br />
10 x Spiraliet BS016 beugel 160mm-M8 1009835 € 3,49 € 34,90<br />
2 x Spiraliet SVH016 verbindingsstuk voor hulpstuk 160mm 1009849 € 2,81 € 5,62<br />
2 x Spiraliet SV016 verbindingsstuk voor buis 160mm 1009842 € 2,81 € 5,62<br />
2 x Spiraliet RT9016 T-stuk 160mm 90º 1009859 € 21,18 € 42,36<br />
1 x Spiraliet FLEX016A111 Alu flex slang 160mm 10 mtr. 1009901 € 89,40 € 89,40<br />
1 x Airfan Ductape 50mm rol a 50mtr. 1009908 € 9,68 € 9,68<br />
5 x PVC bocht 45 graden grijs 40mm 1xmof 1004312 € 0,66 € 3,30<br />
5 x PVC bocht 45 graden grijs 40mm 2xmof 1004313 € 0,66 € 3,30<br />
4 x PVC sok 40mm 1004338 € 0,63 € 2,52<br />
2 x PVC sifon 40mm S/P lijm 1004524 € 4,30 € 8,60<br />
2 x PVC T-stuk 45 graden grijs 40mm 3xmof 1004357 € 1,72 € 3,44<br />
20 x PVC zadel grijs 40mm 1004535 € 0,50 € 10,00<br />
10 x PVC beugel grijs 40mm type B G 1004538 € 0,99 € 9,90<br />
3 x PVC buis grijs 40x3,0mm a 4 mtr. 1004302 € 9,66 € 28,98<br />
Totaal (excl): € 212,91<br />
BTW 21%: € 44,71<br />
Totaal bedrag (incl): € 257,62<br />
<br />
==Pledges==<br />
* €10 -- [[User:Dreamer|dreamer]]<br />
* €25 -- [[User:Wizzup|Wizzup]]<br />
* €25 -- [[User:Peter|Peter]]<br />
* €.. -- ...</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Workbenches&diff=3146Pledges/Workbenches2012-11-16T09:09:38Z<p>Peter: </p>
<hr />
<div>{{Pledge<br />
|Pledge Leader=User:???<br />
|Running Total=0<br />
|Status=Future<br />
}}<br />
__NOTOC__ __NOEDITSECTION__<br />
<br />
[Note that this is not yet an active pledge drive. This wiki page serves to collect <br />
the initial ideas, cost estimates, etc. which will eventually be needed to proceed<br />
with either a pledge drive or pursuing other types of funding.]<br />
<br />
Some activities like woodworking, metalworking, general mechanical work and electronics require<br />
dedicated workbenches instead of simple tables. This page is intended to collect the<br />
various ideas and proposals as to the kinds of workbenches we would like to buy, construct<br />
or otherwise obtain, as well as cost estimates. <br />
<br />
We probably will not pursue all of these in one go, so this may generate multiple pledges. The<br />
current proposal (as of 15 Nov, 2012) for how the workbenches could be arranged is:<br />
<br />
<gallery widths=300px heights=300px><br />
File:Techinc_workbench_proposal.JPG<br />
</gallery><br />
<br />
=Items needed and cost estimates=<br />
== heavy workbench (for vises, metalworking, woodworking) ==<br />
* Inspiration: [http://www.instructables.com/id/Building-a-real-woodworkers-workbench/ Instructable], [http://gaia.sunn.de/tmp/.hidden/workbench.pdf More inspiration (pdf, 240k)]<br />
<br />
== lighter workbench for light mechanical work ==<br />
* (more than one, connectable via latches?)<br />
* Inspiration: [http://www.instructables.com/id/Simple-Workbench/ Instructable]<br />
== electronics workbench ==<br />
* Perhaps the existing tables in the "niche" ( corner 2 of the space) are sufficient?<br />
* If so, the main difficulty is the odd shaped table whose depth varies from 80cm to 100cm, as it isn't flush with the "corner" table.<br />
== dirty room workbench ==<br />
<br />
=Pledges=<br />
* €?? -- ???</div>Peterhttps://wiki.techinc.nl/index.php?title=File:Techinc_workbench_proposal.JPG&diff=3145File:Techinc workbench proposal.JPG2012-11-16T09:05:39Z<p>Peter: </p>
<hr />
<div></div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Workbenches&diff=2901Pledges/Workbenches2012-11-01T14:42:25Z<p>Peter: </p>
<hr />
<div>__NOTOC__ __NOEDITSECTION__<br />
[[File:Pledge_template.jpg|300px|thumb|right|Picture of the item]]<br />
<br />
[Note that this is not yet an active pledge drive. This wiki page serves to collect <br />
the initial ideas, cost estimates, etc. which will eventually be needed to proceed<br />
with either a pledge drive or pursuing other types of funding.]<br />
<br />
Some activities like woodworking, metalworking, general mechanical work and electronics require<br />
dedicated workbenches instead of simple tables. This page is intended to collect the<br />
various ideas and proposals as to the kinds of workbenches we would like to buy, construct<br />
or otherwise obtain, as well as cost estimates. <br />
<br />
We probably will not pursue all of these in one go, so this may generate multiple pledges.<br />
<br />
'''Pledge leader:''' ???<br />
<br />
=Items needed and cost estimates=<br />
== heavy workbench (for vises, metalworking, woodworking) ==<br />
* Inspiration: [http://www.instructables.com/id/Building-a-real-woodworkers-workbench/ Instructable], [http://gaia.sunn.de/tmp/.hidden/workbench.pdf More inspiration (pdf, 240k)]<br />
<br />
== lighter workbench for light mechanical work ==<br />
* (more than one, connectable via latches?)<br />
* Inspiration: [http://www.instructables.com/id/Simple-Workbench/ Instructable]<br />
== electronics workbench ==<br />
* Perhaps the existing tables in the "niche" ( corner 2 of the space) are sufficient?<br />
* If so, the main difficulty is the odd shaped table whose depth varies from 80cm to 100cm, as it isn't flush with the "corner" table.<br />
== dirty room workbench ==<br />
<br />
=Pledges=<br />
* €?? -- ???<br />
<br />
Running total: '''€0'''<br />
<br />
Approximate target: '''€????'''<br />
<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Workbenches&diff=2900Pledges/Workbenches2012-11-01T14:36:54Z<p>Peter: </p>
<hr />
<div>__NOTOC__ __NOEDITSECTION__<br />
[[File:Pledge_template.jpg|300px|thumb|right|Picture of the item]]<br />
<br />
[Note that this is not yet an active pledge drive. This wiki page serves to collect <br />
the initial ideas, cost estimates, etc. which will eventually be needed to proceed<br />
with either a pledge drive or pursuing other types of funding.]<br />
<br />
Some activities like woodworking, metalworking, general mechanical work and electronics require<br />
dedicated workbenches instead of simple tables. This page is intended to collect the<br />
various ideas and proposals as to the kinds of workbenches we would like to buy, construct<br />
or otherwise obtain, as well as cost estimates. <br />
<br />
We probably will not pursue all of these in one go, so this may generate multiple pledges.<br />
<br />
'''Pledge leader:''' ???<br />
<br />
=Items needed and cost estimates=<br />
== heavy workbench (for vises, metalworking, woodworking) ==<br />
* Inspiration: [http://www.instructables.com/id/Building-a-real-woodworkers-workbench/ Instructable], [http://gaia.sunn.de/tmp/.hidden/workbench.pdf More inspiration (pdf, 240k)]<br />
<br />
== lighter workbench for light mechanical work ==<br />
* (more than one, connectable via latches?)<br />
* Inspiration: [http://www.instructables.com/id/Simple-Workbench/ Instructable]<br />
== electronics workbench ==<br />
== dirty room workbench ==<br />
<br />
=Pledges=<br />
* €?? -- ???<br />
<br />
Running total: '''€0'''<br />
<br />
Approximate target: '''€????'''<br />
<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Workbenches&diff=2898Pledges/Workbenches2012-11-01T09:39:49Z<p>Peter: </p>
<hr />
<div>__NOTOC__ __NOEDITSECTION__<br />
[[File:Pledge_template.jpg|300px|thumb|right|Picture of the item]]<br />
<br />
[Note that this is not yet an active pledge drive. This wiki page serves to collect <br />
the initial ideas, cost estimates, etc. which will eventually be needed to proceed<br />
with either a pledge drive or pursuing other types of funding.]<br />
<br />
Some activities like woodworking, metalworking, general mechanical work and electronics require<br />
dedicated workbenches instead of simple tables. This page is intended to collect the<br />
various ideas and proposals as to the kinds of workbenches we would like to buy, construct<br />
or otherwise obtain, as well as cost estimates. <br />
<br />
We probably will not pursue all of these in one go, so this may generate multiple pledges.<br />
<br />
'''Pledge leader:''' ???<br />
<br />
==Items needed and cost estimates==<br />
* heavy workbench (for vises, metalworking, woodworking)<br />
* lighter workbench for light mechanical work (more than one, connectable via latches?)<br />
* electronics workbench<br />
* dirty room workbench<br />
<br />
==Pledges==<br />
* €?? -- ???<br />
<br />
Running total: '''€0'''<br />
<br />
Approximate target: '''€????'''<br />
<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges&diff=2897Pledges2012-11-01T09:38:38Z<p>Peter: </p>
<hr />
<div>A list of pledges for equipment for our hackspace<br />
<br />
here is a [[Pledges/PledgeTemplate|template for new pledges]], and here is [[Guides/Running_a_pledge|a guide to running pledges]]<br />
<br />
= Current Pledge Drives =<br />
<br />
*[[Laboratory Power supply]]<br />
*[[Pledges/Prusai3|Prusa i3]] (3D Printer)<br />
*[[Mig Welder]]<br />
*[[Pledges/Ultimaker|Ultimaker]] (3D Printer)<br />
<br />
= Future Pledge Drives =<br />
The following pages are intended to collect ideas and information (such as costs) for future pledge drives and/or funding. For the moment they are not<br />
considered active. (When/if they become active we will move the link to the active list above and announce it on the mailing list.)<br />
<br />
*[[Pledges/Electronics_Components|Electronics Components]]<br />
*[[Pledges/Presentation Infrastructure|Presentation Infrastructure]]<br />
*[[Pledges/Workbenches|Workbenches]]<br />
<br />
= Completed Pledge Drives =<br />
<br />
*[[Pledges/LEDLightDistrict|LED Light District]]<br />
*[[Pledges/Tools_Bootstrap|Basic Tools Bootstrap]]<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Workbenches&diff=2896Pledges/Workbenches2012-11-01T09:37:57Z<p>Peter: Created page with "__NOTOC__ __NOEDITSECTION__ Picture of the item [Note that this is not yet an active pledge drive. This wiki page serves to col..."</p>
<hr />
<div>__NOTOC__ __NOEDITSECTION__<br />
[[File:Pledge_template.jpg|300px|thumb|right|Picture of the item]]<br />
<br />
[Note that this is not yet an active pledge drive. This wiki page serves to collect <br />
the initial ideas, cost estimates, etc. which will eventually be needed to proceed<br />
with either a pledge drive or pursuing other types of funding.]<br />
<br />
Some activities like woodworking, metalworking, general mechanical work and electronics require<br />
dedicated workbenches instead of simple tables. This page is intended to collect the<br />
various ideas and proposals as to the kinds of workbenches we would like to buy, construct<br />
or otherwise obtain, as well as cost estimates. <br />
<br />
We probably will not pursue all of these in one go, so this may generate multiple pledges.<br />
<br />
'''Pledge leader:''' ???<br />
<br />
==Items needed and cost estimates==<br />
* heavy workbench (for vices, metalworking, woodworking)<br />
* lighter workbench for light mechanical work (more than one, connectable via latches?)<br />
* electronics workbench<br />
* dirty room workbench<br />
<br />
==Pledges==<br />
* €?? -- ???<br />
<br />
Running total: '''€0'''<br />
<br />
Approximate target: '''€????'''<br />
<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges&diff=2895Pledges2012-11-01T09:26:19Z<p>Peter: </p>
<hr />
<div>A list of pledges for equipment for our hackspace<br />
<br />
here is a [[Pledges/PledgeTemplate|template for new pledges]], and here is [[Guides/Running_a_pledge|a guide to running pledges]]<br />
<br />
= Current Pledge Drives =<br />
<br />
*[[Laboratory Power supply]]<br />
*[[Pledges/Prusai3|Prusa i3]] (3D Printer)<br />
*[[Mig Welder]]<br />
*[[Pledges/Ultimaker|Ultimaker]] (3D Printer)<br />
<br />
= Future Pledge Drives =<br />
The following pages are intended to collect ideas and information (such as costs) for future pledge drives and/or funding. For the moment they are not<br />
considered active. (When/if they become active we will move the link to the active list above and announce it on the mailing list.)<br />
<br />
*[[Pledges/Electronics_Components|Electronics Components]]<br />
*[[Pledges/Presentation Infrastructure|Presentation Infrastructure]]<br />
<br />
= Completed Pledge Drives =<br />
<br />
*[[Pledges/LEDLightDistrict|LED Light District]]<br />
*[[Pledges/Tools_Bootstrap|Basic Tools Bootstrap]]<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Presentation_Infrastructure&diff=2894Pledges/Presentation Infrastructure2012-11-01T09:25:28Z<p>Peter: Created page with "__NOTOC__ __NOEDITSECTION__ Picture of the item [Note that this is not yet an active pledge drive. This wiki page serves to col..."</p>
<hr />
<div>__NOTOC__ __NOEDITSECTION__<br />
[[File:Pledge_template.jpg|300px|thumb|right|Picture of the item]]<br />
<br />
[Note that this is not yet an active pledge drive. This wiki page serves to collect <br />
the initial ideas, cost estimates, etc. which will eventually be needed to proceed<br />
with either a pledge drive or pursuing other types of funding.]<br />
<br />
To allow for presentations, workshops and similar activities in the new ACTA space,<br />
we need to purchase some amount of infrastructure items.<br />
<br />
The current proposal (as of 1 Nov, 2012) is to put whiteboards along the wall between<br />
the entrance door and the door to the utility shaft (i.e. Wall 1-4 when numbering<br />
corners clockwise with the main door corner being number 1). In addition we<br />
would aim to have a pull down projector screen located in front of the whiteboards<br />
and a ceiling mounted projector/beamer. Cabling to attach a computer to the <br />
beamer, to the audio system, etc. should also be along Wall 1-4.<br />
<br />
'''Pledge leader:''' [[User:Peter|Peter]]<br />
<br />
==Items needed and cost estimates==<br />
* Whiteboard(s) <br />
* etc. etc. (To be filled in)<br />
<br />
==Pledges==<br />
* €?? -- ???<br />
<br />
Running total: '''€0''<br />
<br />
Approximate target: '''€???'''<br />
<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges&diff=2893Pledges2012-11-01T09:12:56Z<p>Peter: </p>
<hr />
<div>A list of pledges for equipment for our hackspace<br />
<br />
here is a [[Pledges/PledgeTemplate|template for new pledges]], and here is [[Guides/Running_a_pledge|a guide to running pledges]]<br />
<br />
= Current Pledge Drives =<br />
<br />
*[[Laboratory Power supply]]<br />
*[[Pledges/Prusai3|Prusa i3]] (3D Printer)<br />
*[[Mig Welder]]<br />
*[[Pledges/Ultimaker|Ultimaker]] (3D Printer)<br />
<br />
= Future Pledge Drives =<br />
The following pages are intended to collect ideas and information (such as costs) for future pledge drives and/or funding. For the moment they are not<br />
considered active. (When/if they become active we will move the link to the active list above and announce it on the mailing list.)<br />
<br />
*[[Pledges/Electronics_Components|Electronics Components]]<br />
<br />
= Completed Pledge Drives =<br />
<br />
*[[Pledges/LEDLightDistrict|LED Light District]]<br />
*[[Pledges/Tools_Bootstrap|Basic Tools Bootstrap]]<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges&diff=2892Pledges2012-11-01T09:11:21Z<p>Peter: </p>
<hr />
<div>A list of pledges for equipment for our hackspace<br />
<br />
here is a [[Pledges/PledgeTemplate|template for new pledges]], and here is [[Guides/Running_a_pledge|a guide to running pledges]]<br />
<br />
= Current Pledge Drives =<br />
<br />
*[[Laboratory Power supply]]<br />
*[[Mig Welder]]<br />
*[[Pledges/Ultimaker|Ultimaker]] (3D Printer)<br />
*[[Pledges/Prusai3|Prusa i3]] (3D Printer)<br />
<br />
= Future Pledge Drives =<br />
The following pages are intended to collect ideas and information (such as costs) for future pledge drives and/or funding. For the moment they are not<br />
considered active. (When/if they become active we will move the link to the active list above and announce it on the mailing list.)<br />
<br />
*[[Pledges/Electronics_Components|Electronics Components]]<br />
<br />
= Completed Pledge Drives =<br />
<br />
*[[Pledges/LEDLightDistrict|LED Light District]]<br />
*[[Pledges/Tools_Bootstrap|Basic Tools Bootstrap]]<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges&diff=2891Pledges2012-11-01T09:02:50Z<p>Peter: </p>
<hr />
<div>A list of pledges for equipment for our hackspace<br />
<br />
here is a [[Pledges/PledgeTemplate|template for new pledges]], and here is [[Guides/Running_a_pledge|a guide to running pledges]]<br />
<br />
= Current Pledge Drives =<br />
<br />
== Tools ==<br />
<br />
*[[Laboratory Power supply]]<br />
*[[Mig Welder]]<br />
<br />
== 3D Printer ==<br />
*[[Pledges/Ultimaker|Ultimaker]]<br />
*[[Pledges/Prusai3|Prusa i3]]<br />
<br />
= Future Pledge Drives =<br />
The following pages are intended to collect ideas and information (such as costs) for future pledge drives and/or funding. For the moment they are not<br />
considered active. (When/if they become active we will move the link to the active list above and announce it on the mailing list.)<br />
<br />
*[[Pledges/Electronics_Components|Electronics Components]]<br />
<br />
= Completed Pledge Drives =<br />
<br />
*[[Pledges/LEDLightDistrict|LED Light District]]<br />
*[[Pledges/Tools_Bootstrap|Basic Tools Bootstrap]]<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Tools_Bootstrap&diff=2877Pledges/Tools Bootstrap2012-10-31T19:30:03Z<p>Peter: </p>
<hr />
<div>This page describes the initial pledge for things we need to bootstrap our space in terms of basic tooling. For simplicity and completeness<br />
we also include below the set of tools which already existed (typically via donation or loan) when this pledge<br />
drive took place. To be clear, the tools which were bought/donated/loaned as part of this pledge drive are those in the<br />
"Tools Pledge 1" section of the wiki and those which preexisted the pledge are in the "Tools already present..." section.<br />
<br />
There is also a separate page for [[Pledges/Electronics_Components|electronics components]] and a more general [[Tools_Wish_List]]<br />
which will be used to steer other, future pledge drives and/or acquisitions.<br />
<br />
Please add to the list below, including any prices as this will help us target which things we can afford to buy.<br />
If a tool is available in the space, please mark it in the list below as "Available in the space". If you can provide a tool, please note as "Xxx will bring to space" (and eventually as "Available" when it<br />
arrives).<br />
<br />
Some example prices are included below (typically for Gamma, home-use quality) for reference. The tools may eventually be<br />
purchased elsewhere, of course, if better price and similar quality or better quality and similar price prevails...<br />
<br />
=Tools Pledge 1 - Basic Tools Bootstrap =<br />
This pledge is meant to cover a set of basic, mostly general-purpose, tools which are needed for many types of<br />
hardware projects. <br />
<br />
Goal for Tools Pledge 1: ~500 euro (or equivalent in in-kind donations)<br />
<br />
Pledges<br />
[[User:Peter|Peter]] - 100 euro (Paid 26-Sep-2012)<br />
Aldert - 100 euro (Paid 26-Sep-2012)<br />
[[User:amx109|amran]] - 20 euro (Paid 26-Sep-2012)<br />
stef - 20 euro (Paid 31-Oct-2012)<br />
[[User:justa|arnd]] - 20 euro (Paid 26-Sep-2012)<br />
[[User:Brainsmoke|Brainsmoke]] - 20 euro (Paid 26-Sep-2012)<br />
[[User:Dreamer|dreamer]] - 20 euro (Paid 31-Oct-2012)<br />
[[User:realitygaps|realitygaps]] - 20 euro (Paid 3-Oct-2012)<br />
Hamish - 20 euro (Paid 26-Sep-2012)<br />
<br />
<br />
Running Total<br />
* 340 euro (340 Paid), with the rest coming from new donations as indicated below<br />
* '''The pledge drive is considered completed, we are now in the process of purchasing the tools'''<br />
<br />
== Hand Tools ==<br />
* (metal) hacksaw [various 10.00-47.95euro at Gamma, perhaps 20.00euro sufficient + ~10euro for extra blades] (arnd: I have a small one to spare (15cm) and some blades; will donate)<br />
* hand wood saw (arnd: have one extra, will bring)<br />
* spanner set [29.95euro for 6-22mm set at Gamma] - available from basic tools bootstrap pledge<br />
* pliers - available from basic tools bootstrap pledge<br />
* small hammer (e.g. jeweler) - available from basic tools bootstrap pledge<br />
* adjustable wrenches (various sizes) [5.99-17.99euro at Gamma] - available in the space (from basic tools bootstrap pledge and donation from Peter)<br />
* allen/hex wrench set [9.99euro for 1.5-10mm set at Gamma] - available from basic tools bootstrap pledge<br />
* wood files - available from basic tools bootstrap pledge<br />
* metal files (small/large, various) - available from basic tools bootstrap pledge and donation<br />
* jewellers screwdriver set - available from basic tools bootstrap pledge<br />
* torx/non-standard screwdrivers - available from basic tools bootstrap pledge<br />
* c-clamps (several sizes, 2+ each) - available from basic tools bootstrap pledge<br />
* xacto knives - available from basic tools bootstrap pledge<br />
* utility knife [various 5-10euro + 3-5euro for blades, Gamma] - available from basic tools bootstrap pledge<br />
* large bench vise (needs to be bolted to a solid workbench) - available from basic tools bootstrap pledge<br />
* small bench vise (can be clamped to table) - available from basic tools bootstrap pledge<br />
* wire cutters - available from basic tools bootstrap pledge and donation<br />
* pipe cutter - available from basic tools bootstrap pledge<br />
* drill bit set - available from basic tools bootstrap pledge<br />
* wire strippers<br />
* small brushes (various) - available from basic tools bootstrap pledge<br />
* needle-nose pliers (various) - available from basic tools bootstrap pledge<br />
* staple gun - available from basic tools bootstrap pledge<br />
<br />
== Measurement/layout tools ==<br />
* Tape Measure - available from basic tools bootstrap pledge<br />
* Vernier Calipers (digital?) [17.69euro for basic, 29.95euro for digital, Gamma] -- Antony will bring. Arnd: i have a cheaper Vernier Calipers to spare ; suggest buying digital one on offer at ALDI/LIDL when they have them again; cost around 9.95, also handy as servo-feedback-control)<br />
* Micrometer (0-25mm, 0.01mm increments) - available from basic tools bootstrap pledge<br />
* Spirit Level - available from basic tools bootstrap pledge<br />
* Thickness guage [5.29 euro at Gamma] - available from basic tools bootstrap pledge<br />
* Center punches - available from basic tools bootstrap pledge<br />
* Scriber - available from basic tools bootstrap pledge<br />
* Machinist squares - available in space<br />
* Adjustable square - available from basic tools bootstrap pledge<br />
<br />
== Power tools ==<br />
* rotary tool (e.g. dremel) + tools [109.00euro for Dremel 4000 + 45 access. at Gamma, 150euro for cordless model + access.] (arnd: I have one 'dremel-clone' to spare. I own three dremel-type tools and I think 2 is enough ;) It needs a new accessory-kit , however)<br />
* hot glue gun (there is one small one donated by webmind in his for public use box) [13-86euro at [http://www.conrad.nl/ce/nl/overview/1513022/Lijmpistolen Conrad] for various models plus 10euros for gluesticks, say]. Ultratux has 20-40 11mm gluesticks. Arnd has some too that he'll dig up<br />
<br />
== Misc/safety ==<br />
* gloves x2 (work) [3.5-5euro/pair at Gamma] (arnd: i might have a number spare; i keep buying these things. The simple/cheap kind, cloth+leather)<br />
* gloves x2 (rubber/latex) [2.99euro/pair at Gamma] - available from basic tools bootstrap pledge<br />
* safety glasses x 3 [5.99euro/pair at Gamma] (arnd: Might have some of the cheaper types; flat pane plastic + rubber rim; works but easily scratched) - 2 pair from basic tools bootstrap pledge<br />
* Acetone (removes adhesives) [~9.00euro at Da, 1l bottle] - available from basic tools bootstrap pledge<br />
* Ethyl/isopropyl alcohol (for cleaning) [~9.00euro at Da, 1l bottle] - available from basic tools bootstrap pledge<br />
* WD-40 - available in the space<br />
* light machine oil (e.g. sewing machine/bike) - available from basic tools bootstrap pledge<br />
* plastic funnel (arnd: am sure i have a few to spare; part of a set)<br />
* plastic washbin/containers (for use with chemicals, not food) (arnd: have a number of trays to spare perhaps for etching as part of DOKA setup; will investigate)<br />
* safety goggles - available from basic tools bootstrap pledge<br />
* flashlight - available from basic tools bootstrap pledge<br />
<br />
== Space Infrastructure ==<br />
* Trash can (separate from one used for "clean" space)<br />
* brush/dustpan (for "dirty" use) - available from basic tools bootstrap pledge<br />
* broom (for "dirty" use) <br />
<br />
=Tools already present in the space (donated or loaned)=<br />
Items in this section are listed on this wiki page simply for reference, to indicate which things already existed when the pledge drive above began.<br />
They will not be purchased as part of the pledge drive.<br />
<br />
== Hand Tools ==<br />
* hammer (standard claw) - available in space<br />
* vice grips (various sizes?) - available in space (loan from Peter)<br />
* standard screwdriver set (flathead/phillips) - available in space<br />
* chisel - available in space<br />
* metal files - some available in space [5.45euro for three large files, 9.89euro for set of 6 small files, at Gamma]<br />
* spring clamps (several) - available in space (loan from Peter)<br />
* Tweezers/forceps/etc - available in space<br />
* scissors - available in space<br />
* tap/die set - available in the space (loan from Peter)<br />
* retaining ring remover - available in the space (donation from Peter)<br />
* rubber mallet - available in the space (donation from Peter)<br />
* three aviation/sheet metal snips (straight cut, left cut, right cut)- available in the space (loan from Peter)<br />
* center drills (four sizes, BS1/2/3/4) - available in the space (donation from Peter)<br />
* bore guages (three: 0-15mm, 15-30mm, 30-45mm) - available in the space (donation from Peter)<br />
<br />
== Measurement/layout tools ==<br />
* Steel rules (30cm + 50cm) - available in the space (loan from Peter)<br />
<br />
== Power tools ==<br />
* drill press - available in the space (loan from Ultratux?)<br />
* [[Grinder|bench grinder]] - available in the space (belongs to space)<br />
* [[PraxisCordlessDrill|cordless drill]] - available in the space (donated by Ultratux)<br />
* [[PowerDrill|standard (corded) power drill]] - available in space<br />
* sewing machine - two available in space (donated by Vesna?)<br />
<br />
== Electronics Test and Measurement ==<br />
* oscilloscope - available in space (webmind's tektronix from nato is on loan, other?)<br />
* multimeters - two (?) available in the space (origin?)<br />
<br />
== Space Infrastructure ==<br />
* Adjustable Lamp w/magnifier -2 available in the space (loan from Ultratux)<br />
<br />
<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Technologia_Incognita&diff=2792Technologia Incognita2012-10-22T13:42:32Z<p>Peter: </p>
<hr />
<div>{{DISPLAYTITLE:Technologia Incognita}}<br />
{| cellpadding="0" cellspacing="15" style="width:100%;"<br />
|-<br />
<center><br />
<h2 style="border:none">The Amsterdam Hackerspace</h2><br />
<br />
</center><br />
|}<br />
<br />
<br />
<!--<br />
Locations / Members<br />
--><br />
{| cellpadding="0" cellspacing="15" style="width:100%;"<br />
|-<br />
| style="width:42%" |<br />
{{CustomHeading|startcolour=rgb(239,0,0)|endcolour=rgb(255,145,145)|text=Location}}<br />
*The hackspace is located at [http://goo.gl/maps/WNaQe Louwesweg 1] which is in the [[ACTA]] building. <br />
*We are best reached by Public Transport, [http://wiki.techinc.nl/images/2/27/Tech-Inc-ACTA-public-transport-snel-v6.png Check here] for the closest tram/bus/metro stops.<br />
<br />
{{CustomHeadingEnd|startcolour=rgb(239,0,0)|endcolour=rgb(255,145,145)}}<br />
| style="width:2%;vertical-align:top" |<br />
| style="width:56%;vertical-align:center" |<br />
{{CustomHeading|startcolour=rgb(0,132,174)|endcolour=rgb(132,174,255)|text=Members}}<br />
We have a formal membership system, look here [[Become a member]]<br />
<br />
We are a vereniging, we have a board of directors and a bank account. We are currently in the process of formalising the membership process and aim to start taking donations soon.<br />
<br />
If you're trying to find members or more particular board members, go to the [[organisation]] page. We also have a page full of [[people]].<br />
{{CustomHeadingEnd|startcolour=rgb(0,132,174)|endcolour=rgb(132,174,255)}}<br />
|}<br />
<br />
<!--<br />
Contact Us / Meetings<br />
--><br />
{| cellpadding="0" cellspacing="15" style="width:100%;"<br />
|-<br />
| style="width:1%;vertical-align:top" |<br />
| style="width:52%;vertical-align:top" |<br />
<br />
{{CustomHeading|startcolour=rgb(0,0,0)|endcolour=rgb(72,72,72)|text=Contact Us}}<br />
<center><br />
There are a number of ways you can contact us. Here are a few:<br><br />
<br />
IRC [irc://irc.oftc.net/#techinc|irc.oftc.net #techinc] on OFTC<br><br />
[http://twitter.com/#!/techincognita Twitter account] @techincognita<br><br />
[http://www.facebook.com/techincognita Facebook] page<br><br />
<br />
Our [http://www.technologia-incognita.nl/cgi-bin/mailman/listinfo/members general mailing list] carries all discussion about the space past, future and present as well as any/all topic of conversation.<br><br />
<br />
Finally a list of places we've been mentioned in the [[Press|press]]<br />
</center><br />
{{CustomHeadingEnd|startcolour=rgb(0,0,0)|endcolour=rgb(72,72,72)}}<br />
| style="width:2%;vertical-align:top" |<br />
| style="width:43%" |<br />
<br />
{{CustomHeading|startcolour=rgb(42,166,0)|endcolour=rgb(58,226,0)|text=Meetings}}<br />
<br />
Our weekly social meeting happens on Wednesdays from 8pm at our [[ACTA]] space.<br />
<br />
For other upcoming events and meetings also check the [[Events|event page]]<br />
{{CustomHeadingEnd|startcolour=rgb(42,166,0)|endcolour=rgb(58,226,0)}}<br />
| style="width:2%;vertical-align:top" |<br />
|}<br />
<br />
<!--<br />
USEFUL / STUFF / DISCUSSION<br />
--><br />
{| cellpadding="0" cellspacing="15" style="width:100%;"<br />
|-<br />
| style="width:32%" |<br />
{{CustomHeading|startcolour=rgb(98,0,116)|endcolour=rgb(174,0,206)|text=Useful information for space-creation}}<br />
* [http://hxxfoundation.nl/hacker-spaces The HXX-foundation 'hackerspace-creation-guide']<br />
* [http://www.hackerspaces.org Tons of resources about hackerspaces in the world]<br />
{{CustomHeadingEnd|startcolour=rgb(98,0,116)|endcolour=rgb(174,0,206)}}<br />
| style="width:2%;vertical-align:top" |<br />
| style="width:38%;vertical-align:top" |<br />
<br />
{{CustomHeading|startcolour=rgb(246,150,0)|endcolour=rgb(255,172,43)|text=Stuff we need}}<br />
We need to fill up our space to make it nice and cosy, have some hardware left? Or maybe have some spare chairs you don't use anymore? Please contact us and let us know. We also have a page for the [[Tools_Wish_List|tools we want]]<br />
{{CustomHeadingEnd|startcolour=rgb(246,150,0)|endcolour=rgb(255,172,43)}}<br />
| style="width:2%;vertical-align:top" |<br />
| style="width:26%" |<br />
<br />
{{CustomHeading|startcolour=rgb(127,127,127)|endcolour=rgb(159,159,159)|text=Discussion about website}}<br />
<center><br />
[[wikiStructure]]<br />
<br />
[[Isthedanishhackeronfire|Is the danish hacker on fire]]<br />
<br />
[[TODO|Todo list]]<br />
</center><br />
{{CustomHeadingEnd|startcolour=rgb(127,127,127)|endcolour=rgb(159,159,159)}}<br />
|}<br />
<br />
<br />
__NOTOC__<br />
[[Category:TechInc]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Technologia_Incognita&diff=2791Technologia Incognita2012-10-22T13:41:48Z<p>Peter: </p>
<hr />
<div>{{DISPLAYTITLE:Technologia Incognita}}<br />
{| cellpadding="0" cellspacing="15" style="width:100%;"<br />
|-<br />
<center><br />
<h2 style="border:none">The Amsterdam Hackerspace</h2><br />
<br />
</center><br />
|}<br />
<br />
<br />
<!--<br />
Locations / Members<br />
--><br />
{| cellpadding="0" cellspacing="15" style="width:100%;"<br />
|-<br />
| style="width:42%" |<br />
{{CustomHeading|startcolour=rgb(239,0,0)|endcolour=rgb(255,145,145)|text=Location}}<br />
*The hackspace is located at [http://goo.gl/maps/WNaQe Louwesweg 1] which is in the [[ACTA]] building. <br />
*We are best reached by Public Transport, [http://wiki.techinc.nl/images/2/27/Tech-Inc-ACTA-public-transport-snel-v6.png Check here] for the closest tram/bus/metro stops.<br />
<br />
{{CustomHeadingEnd|startcolour=rgb(239,0,0)|endcolour=rgb(255,145,145)}}<br />
| style="width:2%;vertical-align:top" |<br />
| style="width:56%;vertical-align:center" |<br />
{{CustomHeading|startcolour=rgb(0,132,174)|endcolour=rgb(132,174,255)|text=Members}}<br />
We have a formal membership system, look here [[Become a member]]<br />
<br />
We are a vereniging, we have a board of directors and a bank account. We are currently in the process of formalising the membership process and aim to start taking donations soon.<br />
<br />
If you're trying to find members or more particular board members, go to the [[organisation]] page. We also have a page full of [[people]].<br />
{{CustomHeadingEnd|startcolour=rgb(0,132,174)|endcolour=rgb(132,174,255)}}<br />
|}<br />
<br />
<!--<br />
Contact Us / Meetings<br />
--><br />
{| cellpadding="0" cellspacing="15" style="width:100%;"<br />
|-<br />
| style="width:1%;vertical-align:top" |<br />
| style="width:52%;vertical-align:top" |<br />
<br />
{{CustomHeading|startcolour=rgb(0,0,0)|endcolour=rgb(72,72,72)|text=Contact Us}}<br />
<center><br />
There are a number of ways you can contact us. Here are a few:<br><br />
<br />
IRC [irc://irc.oftc.net/#techinc|irc.oftc.net #techinc] on OFTC<br><br />
[http://twitter.com/#!/techincognita Twitter account] @techincognita<br><br />
[http://www.facebook.com/techincognita Facebook] page<br><br />
<br />
Our [http://www.technologia-incognita.nl/cgi-bin/mailman/listinfo/members general mailing list] carries all discussion about the space past, future and present as well as any/all topic of conversation.<br><br />
<br />
Finally a list of places we've been mentioned in the [[Press|press]]<br />
</center><br />
{{CustomHeadingEnd|startcolour=rgb(0,0,0)|endcolour=rgb(72,72,72)}}<br />
| style="width:2%;vertical-align:top" |<br />
| style="width:43%" |<br />
<br />
{{CustomHeading|startcolour=rgb(42,166,0)|endcolour=rgb(58,226,0)|text=Meetings}}<br />
<br />
Our weekly social meeting will happens at our [[ACTA]] space, on Wednesdays from 8pm.<br />
<br />
For other upcoming events and meetings also check the [[Events|event page]]<br />
{{CustomHeadingEnd|startcolour=rgb(42,166,0)|endcolour=rgb(58,226,0)}}<br />
| style="width:2%;vertical-align:top" |<br />
|}<br />
<br />
<!--<br />
USEFUL / STUFF / DISCUSSION<br />
--><br />
{| cellpadding="0" cellspacing="15" style="width:100%;"<br />
|-<br />
| style="width:32%" |<br />
{{CustomHeading|startcolour=rgb(98,0,116)|endcolour=rgb(174,0,206)|text=Useful information for space-creation}}<br />
* [http://hxxfoundation.nl/hacker-spaces The HXX-foundation 'hackerspace-creation-guide']<br />
* [http://www.hackerspaces.org Tons of resources about hackerspaces in the world]<br />
{{CustomHeadingEnd|startcolour=rgb(98,0,116)|endcolour=rgb(174,0,206)}}<br />
| style="width:2%;vertical-align:top" |<br />
| style="width:38%;vertical-align:top" |<br />
<br />
{{CustomHeading|startcolour=rgb(246,150,0)|endcolour=rgb(255,172,43)|text=Stuff we need}}<br />
We need to fill up our space to make it nice and cosy, have some hardware left? Or maybe have some spare chairs you don't use anymore? Please contact us and let us know. We also have a page for the [[Tools_Wish_List|tools we want]]<br />
{{CustomHeadingEnd|startcolour=rgb(246,150,0)|endcolour=rgb(255,172,43)}}<br />
| style="width:2%;vertical-align:top" |<br />
| style="width:26%" |<br />
<br />
{{CustomHeading|startcolour=rgb(127,127,127)|endcolour=rgb(159,159,159)|text=Discussion about website}}<br />
<center><br />
[[wikiStructure]]<br />
<br />
[[Isthedanishhackeronfire|Is the danish hacker on fire]]<br />
<br />
[[TODO|Todo list]]<br />
</center><br />
{{CustomHeadingEnd|startcolour=rgb(127,127,127)|endcolour=rgb(159,159,159)}}<br />
|}<br />
<br />
<br />
__NOTOC__<br />
[[Category:TechInc]]</div>Peterhttps://wiki.techinc.nl/index.php?title=ACTA/Floorplan&diff=2684ACTA/Floorplan2012-10-17T12:21:09Z<p>Peter: </p>
<hr />
<div>This page contains floorplans and information about the layout of the ACTA space.<br />
<br />
= Drawings =<br />
<gallery caption="Measurements by Hand" widths=400px heights=400px perrow="2"><br />
File:ACTA initial innacurate measurements.jpg|measurements first taken at ACTA<br />
File:ACTA final slighty more accurate measurements.jpg|measurements taken with laser range device<br />
</gallery><br />
<br><br />
<gallery caption="Floorplan" widths=400px heights=400px perrow="3"><br />
File:ACTA floorplan.png|walls plus door locations<br />
File:ACTA floorplan detail.png|all walls plus dimensions, including ceiling.<br />
File:ACTA_floorplan.svg|svg of the basic floorplan here (because Arnd is fussy).<br />
</gallery><br />
<br />
The DXF that the above PNG/SVG are based on can be found here [[File:ACTA_floorplan.dxf.tar.gz|DXF]]<br />
<br />
A blender scene has been created too [[File:ACTA_floorplan.blend.tar.gz|blender]]<br />
<br />
Note with ref to ceilings - the height of the lowered ceiling is 2.8 meters from the floor, the real ceiling is about 3.8m from the floor, the lowered ceiling covers most of the space except for a bit on the north wall (right on the map)<br />
<br />
=Pictures=<br />
Nice high-res pictures made on the 3rd of October 2012 can be found here : http://www.sociallife.org/data/acta_pics/<br />
<br />
= Planned Layout =<br />
<br />
== Ideas for discussion ==<br />
* I find that "standing" height workbenches are more useful than normal sitting tables for mechanical type work since some of that work is more naturally done standing. If one wants to sit, high stools can be used. [Peter]<br />
* It might be useful to arrange the electronics and mechanical workbenches so that people won't typically walk up behind (and surprise one) when working at them. [Peter]<br />
* Half-height partitions (such as in [http://media.designerpages.com/3rings/wp-content/themes/3rings-otto/i/?w=546&h=346&src=http%3A%2F%2Fmedia.designerpages.com%2F3rings%2Fwp-content%2Fuploads%2F2012%2F03%2Flindner-logic-690-is-a-small-wall-with-big-advantages-sub1.jpg this random web photo] could be used to partially segregate the workshop area from the bulk of the space. [Peter]<br />
<br />
== Requirements ==<br />
* Dirty Room<br />
<br />
==Scans of suggested layouts as discussed on the wednesday visit 15/10/2012==<br />
<br />
<gallery caption="Measurements by Hand" widths=400px heights=400px perrow="2"><br />
File:2793_001.jpg|vesna's suggestion<br />
File:2794_001.jpg|<br />
File:2795_001.jpg|dreamer's drawing #1<br />
File:2796_001.jpg|dreamer's drawing #2<br />
File:IMAG0157.jpg|phicoh's drawing<br />
File:Techinc_floorplan_proposal.JPG | Peter's proposal<br />
</gallery><br />
<br />
== Things occupying ==<br />
<br />
=== floor space ===<br />
<br />
To aid in planning for the move from TempInc to ACTA, we also include here a list of all of the <br />
things people expect to be in the new space as well as their approximate sizes.<br />
<br />
* Wooden table from TempInc social area (exists) - size 110cm x 210cm<br />
* Fridge (exists) - 60cm wide x 62cm deep<br />
* Four couches from TempInc (all exist currently) <br />
** 185cm x 85cm (white couch, slightly destroyed)<br />
** 185cm x 90cm (larger red couch)<br />
** 155cm x 85cm (smaller red couch)<br />
** 155cm x 85cm (brown couch)<br />
* lackrack - 55cm x 55cm<br />
* desk by TempInc entrance (exists currently) - 59cm x 140cm<br />
* four file cabinets (exist) - size 42cm wide x 80cm deep<br />
* 10 white plastic chairs (exist currently)<br />
* 2 fabric covered chairs (exist currently) - at social room table<br />
* one desk rolling chair (exists currently)<br />
* one green rolling/reclining chair (exists currently)<br />
* 32 chairs (exist, will be brought to ACTA)<br />
* Metalworking/woodworking/mechanical workbench (to buy/build) - size? 80cm x 200cm? (if along wall)<br />
* Existing tables from TempInc back room (exist currently) - number, sizes, layout?<br />
** three "corner" tables - 160cm square with notch and 80cm deep sides (plus one disassembled?)<br />
** one table - 200cm wide and varying from 80cm to 100cm deep<br />
* "food" table (exists currently) - size 90cm deep x 200cm wide<br />
* Electronics workbench (to buy/build or reuse table?) - size? 80cm deep x 200cm wide? (if along wall)<br />
* Vinyl cutting plotter TA-10 (exists currently) - size?<br />
* "Project" table? (to buy/build if thought to be useful)<br />
** e.g. 120cm x 240cm "standing" hieght table for middle of room (not along wall) "large" worktable?<br />
** Could serve as a worktable for projects deeper than 80cm or (slightly) longer than typical 200cm table<br />
** perhaps moveable or possible to disassemble (w/o too much grief) to liberate space for workshops/events when needed?<br />
* The 19" rack cabinet (approx size 60cm W x90cm D x 100cm H)<br />
<br />
=== wall space ===<br />
* Toolboard (exists) - size 1.22m x 2.44m<br />
* Whiteboards (to buy/build) - one or more? sizes?<br />
* Projection area for workshops/events/tutorials (to build/choose)<br />
* Eventual wall mounted screens? <br />
* [[LEDLightDistrict]]?<br />
<br />
[[Category:ACTA]]</div>Peterhttps://wiki.techinc.nl/index.php?title=File:Techinc_floorplan_proposal.JPG&diff=2683File:Techinc floorplan proposal.JPG2012-10-17T12:19:16Z<p>Peter: </p>
<hr />
<div></div>Peterhttps://wiki.techinc.nl/index.php?title=Pledges/Tools_Bootstrap&diff=2656Pledges/Tools Bootstrap2012-10-15T13:11:18Z<p>Peter: </p>
<hr />
<div>This page describes the initial pledge for things we need to bootstrap our space in terms of basic tooling. For simplicity and completeness<br />
we also include below the set of tools which already existed (typically via donation or loan) when this pledge<br />
drive took place. To be clear, the tools which were bought/donated/loaned as part of this pledge drive are those in the<br />
"Tools Pledge 1" section of the wiki and those which preexisted the pledge are in the "Tools already present..." section.<br />
<br />
There is also a separate page for [[Pledges/Electronics_Components|electronics components]] and a more general [[Tools_Wish_List]]<br />
which will be used to steer other, future pledge drives and/or acquisitions.<br />
<br />
Please add to the list below, including any prices as this will help us target which things we can afford to buy.<br />
If a tool is available in the space, please mark it in the list below as "Available in the space". If you can provide a tool, please note as "Xxx will bring to space" (and eventually as "Available" when it<br />
arrives).<br />
<br />
Some example prices are included below (typically for Gamma, home-use quality) for reference. The tools may eventually be<br />
purchased elsewhere, of course, if better price and similar quality or better quality and similar price prevails...<br />
<br />
=Tools Pledge 1 - Basic Tools Bootstrap =<br />
This pledge is meant to cover a set of basic, mostly general-purpose, tools which are needed for many types of<br />
hardware projects. <br />
<br />
Goal for Tools Pledge 1: ~500 euro (or equivalent in in-kind donations)<br />
<br />
Pledges<br />
[[User:Peter|Peter]] - 100 euro (Paid 26-Sep-2012)<br />
Aldert - 100 euro (Paid 26-Sep-2012)<br />
[[User:amx109|amran]] - 20 euro (Paid 26-Sep-2012)<br />
stef - 20 euro<br />
[[User:justa|arnd]] - 20 euro (Paid 26-Sep-2012)<br />
[[User:Brainsmoke|Brainsmoke]] - 20 euro (Paid 26-Sep-2012)<br />
[[User:Dreamer|dreamer]] - 20 euro<br />
[[User:realitygaps|realitygaps]] - 20 euro (Paid 3-Oct-2012)<br />
Hamish - 20 euro (Paid 26-Sep-2012)<br />
<br />
<br />
Running Total<br />
* 340 euro (300 Paid), with the rest coming from new donations as indicated below<br />
* '''The pledge drive is considered completed, we are now in the process of purchasing the tools'''<br />
<br />
== Hand Tools ==<br />
* (metal) hacksaw [various 10.00-47.95euro at Gamma, perhaps 20.00euro sufficient + ~10euro for extra blades] (arnd: I have a small one to spare (15cm) and some blades; will donate)<br />
* hand wood saw (arnd: have one extra, will bring)<br />
* spanner set [29.95euro for 6-22mm set at Gamma] - available from basic tools bootstrap pledge<br />
* pliers - available from basic tools bootstrap pledge<br />
* small hammer (e.g. jeweler) - available from basic tools bootstrap pledge<br />
* adjustable wrenches (various sizes) [5.99-17.99euro at Gamma] - available in the space (from basic tools bootstrap pledge and donation from Peter)<br />
* allen/hex wrench set [9.99euro for 1.5-10mm set at Gamma] - available from basic tools bootstrap pledge<br />
* wood files - available from basic tools bootstrap pledge<br />
* metal files (small/large, various) - available from basic tools bootstrap pledge and donation<br />
* jewellers screwdriver set - available from basic tools bootstrap pledge<br />
* torx/non-standard screwdrivers - available from basic tools bootstrap pledge<br />
* c-clamps (several sizes, 2+ each) - available from basic tools bootstrap pledge<br />
* xacto knives - available from basic tools bootstrap pledge<br />
* utility knife [various 5-10euro + 3-5euro for blades, Gamma] - available from basic tools bootstrap pledge<br />
* large bench vise (needs to be bolted to a solid workbench) - available from basic tools bootstrap pledge<br />
* small bench vise (can be clamped to table) - available from basic tools bootstrap pledge<br />
* wire cutters - available from basic tools bootstrap pledge and donation<br />
* pipe cutter - available from basic tools bootstrap pledge<br />
* drill bit set - available from basic tools bootstrap pledge<br />
* wire strippers<br />
* small brushes (various) - available from basic tools bootstrap pledge<br />
* needle-nose pliers (various) - available from basic tools bootstrap pledge<br />
* staple gun - available from basic tools bootstrap pledge<br />
<br />
== Measurement/layout tools ==<br />
* Tape Measure - available from basic tools bootstrap pledge<br />
* Vernier Calipers (digital?) [17.69euro for basic, 29.95euro for digital, Gamma] -- Antony will bring. Arnd: i have a cheaper Vernier Calipers to spare ; suggest buying digital one on offer at ALDI/LIDL when they have them again; cost around 9.95, also handy as servo-feedback-control)<br />
* Micrometer (0-25mm, 0.01mm increments) - available from basic tools bootstrap pledge<br />
* Spirit Level - available from basic tools bootstrap pledge<br />
* Thickness guage [5.29 euro at Gamma] - available from basic tools bootstrap pledge<br />
* Center punches - available from basic tools bootstrap pledge<br />
* Scriber - available from basic tools bootstrap pledge<br />
* Machinist squares - available in space<br />
* Adjustable square - available from basic tools bootstrap pledge<br />
<br />
== Power tools ==<br />
* rotary tool (e.g. dremel) + tools [109.00euro for Dremel 4000 + 45 access. at Gamma, 150euro for cordless model + access.] (arnd: I have one 'dremel-clone' to spare. I own three dremel-type tools and I think 2 is enough ;) It needs a new accessory-kit , however)<br />
* hot glue gun (there is one small one donated by webmind in his for public use box) [13-86euro at [http://www.conrad.nl/ce/nl/overview/1513022/Lijmpistolen Conrad] for various models plus 10euros for gluesticks, say]. Ultratux has 20-40 11mm gluesticks. Arnd has some too that he'll dig up<br />
<br />
== Misc/safety ==<br />
* gloves x2 (work) [3.5-5euro/pair at Gamma] (arnd: i might have a number spare; i keep buying these things. The simple/cheap kind, cloth+leather)<br />
* gloves x2 (rubber/latex) [2.99euro/pair at Gamma] - available from basic tools bootstrap pledge<br />
* safety glasses x 3 [5.99euro/pair at Gamma] (arnd: Might have some of the cheaper types; flat pane plastic + rubber rim; works but easily scratched) - 2 pair from basic tools bootstrap pledge<br />
* Acetone (removes adhesives) [~9.00euro at Da, 1l bottle] - available from basic tools bootstrap pledge<br />
* Ethyl/isopropyl alcohol (for cleaning) [~9.00euro at Da, 1l bottle] - available from basic tools bootstrap pledge<br />
* WD-40 - available in the space<br />
* light machine oil (e.g. sewing machine/bike) - available from basic tools bootstrap pledge<br />
* plastic funnel (arnd: am sure i have a few to spare; part of a set)<br />
* plastic washbin/containers (for use with chemicals, not food) (arnd: have a number of trays to spare perhaps for etching as part of DOKA setup; will investigate)<br />
* safety goggles - available from basic tools bootstrap pledge<br />
* flashlight - available from basic tools bootstrap pledge<br />
<br />
== Space Infrastructure ==<br />
* Trash can (separate from one used for "clean" space)<br />
* brush/dustpan (for "dirty" use) - available from basic tools bootstrap pledge<br />
* broom (for "dirty" use) <br />
<br />
=Tools already present in the space (donated or loaned)=<br />
Items in this section are listed on this wiki page simply for reference, to indicate which things already existed when the pledge drive above began.<br />
They will not be purchased as part of the pledge drive.<br />
<br />
== Hand Tools ==<br />
* hammer (standard claw) - available in space<br />
* vice grips (various sizes?) - available in space (loan from Peter)<br />
* standard screwdriver set (flathead/phillips) - available in space<br />
* chisel - available in space<br />
* metal files - some available in space [5.45euro for three large files, 9.89euro for set of 6 small files, at Gamma]<br />
* spring clamps (several) - available in space (loan from Peter)<br />
* Tweezers/forceps/etc - available in space<br />
* scissors - available in space<br />
* tap/die set - available in the space (loan from Peter)<br />
* retaining ring remover - available in the space (donation from Peter)<br />
* rubber mallet - available in the space (donation from Peter)<br />
* three aviation/sheet metal snips (straight cut, left cut, right cut)- available in the space (loan from Peter)<br />
* center drills (four sizes, BS1/2/3/4) - available in the space (donation from Peter)<br />
* bore guages (three: 0-15mm, 15-30mm, 30-45mm) - available in the space (donation from Peter)<br />
<br />
== Measurement/layout tools ==<br />
* Steel rules (30cm + 50cm) - available in the space (loan from Peter)<br />
<br />
== Power tools ==<br />
* drill press - available in the space (loan from Ultratux?)<br />
* [[Grinder|bench grinder]] - available in the space (belongs to space)<br />
* [[PraxisCordlessDrill|cordless drill]] - available in the space (donated by Ultratux)<br />
* [[PowerDrill|standard (corded) power drill]] - available in space<br />
* sewing machine - two available in space (donated by Vesna?)<br />
<br />
== Electronics Test and Measurement ==<br />
* oscilloscope - available in space (webmind's tektronix from nato is on loan, other?)<br />
* multimeters - two (?) available in the space (origin?)<br />
<br />
== Space Infrastructure ==<br />
* Adjustable Lamp w/magnifier -2 available in the space (loan from Ultratux)<br />
<br />
<br />
<br />
[[Category:Pledges]]</div>Peterhttps://wiki.techinc.nl/index.php?title=Tools_Wish_List&diff=2638Tools Wish List2012-10-12T22:52:33Z<p>Peter: </p>
<hr />
<div>This wiki page lists a number of tools which we would be interested in making available for use in the space, but which<br />
do not currently exist. See the [[Inventory]] page for a list of all of the tools which do exist.<br />
<br />
We hope that we will eventually be able to acquire many of these tools. Depending on the interests of members,<br />
we expect that various items will eventually be the objective of dedicated pledge drives and/or direct<br />
purchases via funds available to the space. Others may be acquired through donation or loan.<br />
If you or someone you know has something on this list which you would be willing to donate or loan, please<br />
makes this known to the other members.<br />
<br />
<br />
= Hand Tools =<br />
* boltcutters<br />
* sheet metal brake<br />
* sheet metal shears/guillotine<br />
* rivet gun<br />
* lockpick set<br />
* crowbar<br />
* socket/ratchet wrench set<br />
* arbor press<br />
* drill press vise<br />
<br />
= Measurement/layout tools =<br />
* Infrared Thermometer<br />
* Digital kitchen scale<br />
* Digital microscope (USB)<br />
* Laser distance finder<br />
<br />
= Power tools =<br />
* evolution rage saw<br />
* band saw, horizontal<br />
* band saw, vertical<br />
* jigsaw<br />
* metal lathe (+ tooling!)<br />
* metal milling machine (+ tooling!)<br />
* air compressor<br />
* plasma cutter<br />
<br />
= Electronics Test and Measurement =<br />
* cheap soldering irons+holders - available in space (more for workshops?)<br />
* regulated powersupply (arnd: I have a 19" version; analog , 2x35V 2A OR 1x70V 2A OR 1*35V 2A; large but stable)<br />
* workbench power supply (variable voltage) - A dedicated [[Laboratory_Power_supply|pledge drive]] is underway.<br />
* braided desoldering wire<br />
* Cheap multimeters (several) - Aldi had them on offer recently. Interesting to investigate; will serve for rudimentary things and/or workshops.<br />
* Bus pirate?<br />
* Logic analyzer?<br />
<br />
= Digital Fabrication =<br />
* 3D printer -Two pledge drives are underway: [[Pledges/Prusai3|Prusai3]] and [[Pledges/Ultimaker|Ultimaker]]<br />
* Router/XY-CNC<br />
* Laser cutter<br />
* PCB etching/cutting?<br />
<br />
= Space Infrastructure =<br />
* Solid workbench (for mounting vises, using with lathe/mill/grinder, standing height, not sitting)<br />
* Stools (tall, for "standing" bench)<br />
* Shop Vacuum (separate from one used for "clean" space)<br />
* Large Whiteboard<br />
* Projector/beamer<br />
* Cutting mats<br />
* Big box of legos :-)<br />
* Toolbox, rolling w/ drawers?<br />
* Ladder<br />
* Rechargeable batteries (AAA, AA, perhaps others???) and charger<br />
<br />
= Materials/Consumables =<br />
It would probably be interesting to have a small stock of the following materials in the space. Prices could be posted<br />
and an honor system could be used by members to make the appropriate cash donations as they use the stock. In<br />
addition there will of course be a "scrap" bin of odds and ends. Note that there is a dedicated wiki for [[Pledges/Electronics_Components|electronics components/consumables]].<br />
* Acrylic<br />
* Wood (various sized pieces of plywood, MDF, etc.)<br />
* Aluminum sheet, sheet steel<br />
* Aluminum and steel bar stock, various diameters<br />
* Aluminum plate stock<br />
* Aluminum and steel angle stock<br />
* Threaded steel rod (various sizes: M4, M5, M6, etc.)<br />
* Various screws/bolts, nuts, washers, nails, etc.<br />
* T-slot construction extrusions (Al) - for example [http://www.openbeamusa.com/ Openbeam], [http://www.microrax.com/ MicroRax] and/or [http://makerslide.com/ Makerslide] (plus the any joining plates, screws, etc.)<br />
<br />
= Welding/Brazing/Soldering =<br />
* TIG welder<br />
* MIG welder<br />
* spot welder<br />
* 2 soldering stations on loan available<br />
<br />
= Woodworking =<br />
* TODO</div>Peterhttps://wiki.techinc.nl/index.php?title=Tools_Wish_List&diff=2637Tools Wish List2012-10-12T22:31:36Z<p>Peter: </p>
<hr />
<div>This wiki page lists a number of tools which we would be interested in making available for use in the space, but which<br />
do not currently exist. See the [[Inventory]] page for a list of all of the tools which do exist.<br />
<br />
We hope that we will eventually be able to acquire many of these tools. Depending on the interests of members,<br />
we expect that various items will eventually be the objective of dedicated pledge drives and/or direct<br />
purchases via funds available to the space. Others may be acquired through donation or loan.<br />
If you or someone you know has something on this list which you would be willing to donate or loan, please<br />
makes this known to the other members.<br />
<br />
<br />
= Hand Tools =<br />
* boltcutters<br />
* sheet metal brake<br />
* sheet metal shears/guillotine<br />
* rivet gun<br />
* lockpick set<br />
* crowbar<br />
* socket/ratchet wrench set<br />
* arbor press<br />
* drill press vise<br />
<br />
= Measurement/layout tools =<br />
* Infrared Thermometer<br />
* Digital kitchen scale<br />
* Digital microscope (USB)<br />
* Laser distance finder<br />
<br />
= Power tools =<br />
* evolution rage saw<br />
* band saw, horizontal<br />
* band saw, vertical<br />
* jigsaw<br />
* metal lathe (+ tooling!)<br />
* metal milling machine (+ tooling!)<br />
* air compressor<br />
* plasma cutter<br />
<br />
= Electronics Test and Measurement =<br />
* cheap soldering irons+holders - available in space (more for workshops?)<br />
* regulated powersupply (arnd: I have a 19" version; analog , 2x35V 2A OR 1x70V 2A OR 1*35V 2A; large but stable)<br />
* workbench power supply (variable voltage) - A dedicated [[Laboratory_Power_supply|pledge drive]] is underway.<br />
* braided desoldering wire<br />
* Cheap multimeters (several) - Aldi had them on offer recently. Interesting to investigate; will serve for rudimentary things and/or workshops.<br />
* Bus pirate?<br />
* Logic analyzer?<br />
<br />
= Digital Fabrication =<br />
* 3D printer -Two pledge drives are underway: [[Pledges/Prusai3|Prusai3]] and [[Pledges/Ultimaker|Ultimaker]]<br />
* Router/XY-CNC<br />
* Laser cutter<br />
* PCB etching/cutting?<br />
<br />
= Space Infrastructure =<br />
* Solid workbench (for mounting vises, using with lathe/mill/grinder, standing height, not sitting)<br />
* Stools (tall, for "standing" bench)<br />
* Shop Vacuum (separate from one used for "clean" space)<br />
* Large Whiteboard<br />
* Projector/beamer<br />
* Cutting mats<br />
* Big box of legos :-)<br />
* Toolbox, rolling w/ drawers?<br />
* Ladder<br />
* Rechargeable batteries (AAA, AA, perhaps others???) and charger<br />
<br />
= Materials/Consumables =<br />
It would probably be interesting to have a small stock of the following materials in the space. Prices could be posted<br />
and an honor system could be used by members to make the appropriate cash donations as they use the stock. In<br />
addition there will of course be a "scrap" bin of odds and ends. Note that there is a dedicated wiki for [[Pledges/Electronics_Components|electronics components/consumables]].<br />
* Acrylic<br />
* Wood (various sized pieces of plywood, MDF, etc.)<br />
* Aluminum sheet, sheet steel<br />
* Aluminum and steel bar stock, various diameters<br />
* Aluminum plate stock<br />
* Aluminum and steel angle stock<br />
* Threaded steel rod (various sizes: M4, M5, M6, etc.)<br />
* Various screws/bolts, nuts, washers, nails, etc.<br />
* T-slot construction extrusions (Al) - for example [http://www.openbeamusa.com/ Openbeam], [http://www.microrax.com/ MicroRax] and/or [http://makerslide.com/ Makerslide] (plus the any joining plates, screws, etc.)<br />
<br />
= Welding/Brazing/Soldering =<br />
* 2 soldering stations on loan available<br />
<br />
= Woodworking =<br />
* TODO</div>Peterhttps://wiki.techinc.nl/index.php?title=Kolomboor&diff=2626Kolomboor2012-10-12T19:09:15Z<p>Peter: For (only-)English speakers...</p>
<hr />
<div>{{Inventory<br />
|Description=Kolomboor (Drill Press)<br />
|Operational Status=Working<br />
|Super Users=User:Ultratux<br />
|Received at=2012/05/05<br />
|Owner=User:Ultratux<br />
}}<br />
El cheapo kolomboor with 3 speeds</div>Peterhttps://wiki.techinc.nl/index.php?title=Membership&diff=2623Membership2012-10-12T18:52:44Z<p>Peter: Clean up some obsolete and/or soon to be obsolete information</p>
<hr />
<div>To fund the space we need members who can pay a monthly fee to help pay for rent and services. <br />
<br />
At the moment we rent the [[Temp Inc]] space on the vijzelgracht. From the second half of October, 2012, we will be<br />
moving to the [[ACTA]] space at Louwesweg 1.<br />
<br />
=Costs=<br />
For the ACTA space we are looking at a cost of ~1100 Euros monthly for rent and services. <br />
<br />
=Expenditure=<br />
* The space will be run at cost<br />
* Any surplus will be saved and either go towards new tooling/components or saving for a future space<br />
<br />
=Membership Pricing Guidelines=<br />
<br />
Please note, the space is funded solely from these membership fees. The following represents the current guidelines. These could change depending on our funding situation, but the hope is that this model will be inclusive to people of all incomes/backgrounds. <br />
<br />
Tech Inc propose to operate a 'pay what you can' scheme. There will be a suggested recommended amount which we hope all members can meet. The recommended amount will be set at a level that ensures we cover our costs. <br />
* If you intend to only use the space once in a while, if at all, then please feel free to pay a representative amount which is lower than the recommended amount<br />
* The more you use the space, the more we would expect you to pay to help cover the running costs. <br />
<br />
Pricing Guideline:<br />
* minimum amount to become a member should be 5 EUR per month<br />
* recommended amount is currently 20 EUR month<br />
* if you cannot afford to pay anything but would still like to be a member of the community, please approach the board.<br />
<br />
=Membership benefits=<br />
* Access to the space - if its available from the owners, Mediamatic will be open most evenings, weekends and hopefully some afternoons. The [[ACTA]] space has been confirmed 24/7<br />
* Storage space for members at the [[ACTA]] space<br />
* Access to the [[Inventory|machines/tools available in the space]]<br />
* Ability to hold workshops and support for that<br />
<br />
=Current level of Commitment=<br />
<br />
As of 13-04-2012 members who have committed to membership so far: 29<br />
<br />
<br />
{{TechIncInfo}}<br />
[[Category:TechInc]]</div>Peter